Sharp MX-LC11 Service Manual ▷ View online
MX-LC11 MAINTENANCE 3 – 1
MX-LC11
Service Manual
[3] MAINTENANCE
1. Maintenance list
On greasing
Greasing is not always necessary for every maintenance. In the following cases, check and grease.
• There are some noises.
• Many jams occur frequently. (Check the jam history.)
For the part code of grease to be used, refer to [15] “Tool List” in service manual (00ZMX3610/S1E).
Greasing is not always necessary for every maintenance. In the following cases, check and grease.
• There are some noises.
• Many jams occur frequently. (Check the jam history.)
For the part code of grease to be used, refer to [15] “Tool List” in service manual (00ZMX3610/S1E).
Cleaning of the paper feed and paper transport system sensors and detectors
Cleaning of the paper feed and paper transport system sensors and detectors is not always necessary for every maintenance. In the following
case, check and clean.
• A trouble or jam is generated because of the sensors or detectors. (Check the jam history.)
Cleaning of the paper feed and paper transport system sensors and detectors is not always necessary for every maintenance. In the following
case, check and clean.
• A trouble or jam is generated because of the sensors or detectors. (Check the jam history.)
Torque limiter check and replacement
Torque limiter check or replacement is not always necessary for every maintenance. In the following cases, check and replace.
• There are some noises.
• Many jams occur frequently. (Check the jam history.)
Torque limiter check or replacement is not always necessary for every maintenance. In the following cases, check and replace.
• There are some noises.
• Many jams occur frequently. (Check the jam history.)
Alcohol used for cleaning
Be sure to use ethanol for cleaning.
Be sure to use ethanol for cleaning.
Unit work
sequence
sequence
Unit name
Parts
work
sequence
Part name
When
calling
When
machine
cycle
Remarks
1
Paper feed unit
1
Paper pickup roller
✕
As a rough guide, these rollers should be replaced when
each tray paper feed counter reaches a value of 100K or
when one year has elapsed since the start of use.
each tray paper feed counter reaches a value of 100K or
when one year has elapsed since the start of use.
2
Paper feed roller
✕
3
Separation roller
✕
4
Torque limiter
✕
✕
As a rough guide, the torque limiter should be replaced
when each tray paper feed counter reaches a value of 800K.
when each tray paper feed counter reaches a value of 800K.
5
Transport roller
✕
6
Each gear (grease)
✕
✕
When checking, apply to the specified positions.
HANARL FL-955R
HANARL FL-955R
7
Each sensor
✕
✕
---
Each paper guide
Clean with alcohol.
2
Drive unit
8
Each gear (grease)
✕
✕
When checking, apply to the specified positions.
Molykote X5-6020
Molykote BR-2 Plus
Molykote X5-6020
Molykote BR-2 Plus
9
Each belt
✕
✕
10
Each sensor
✕
✕
3
Other
11
Each gear (grease)
✕
✕
When checking, apply to the specified positions.
Molykote X5-6020
Molykote X5-6020
12
Each sensor
✕
✕
//
: Check (clean, replace or adjust as required)
: Clean
/
:Replace
/
/
: Adjust
/
: Lubricate
MX-LC11 MAINTENANCE 3 – 2
1
5
4
6
2
3
7
7
10
9
12
12
7
11
11
8
8
Molykote
BR-2 Plus grease
BR-2 Plus grease
Molykote
X5-6020 grease
X5-6020 grease
MX-LC11 MAINTENANCE 3 – 3
2. Each unit disassembly
A. Paper feed section
(1) Paper feed tray
1)
Pull out the paper feed tray.
Loosen the stopper fixing screw on the lower right side of the
paper feed tray, move the stopper so it wont catch on the
frame and keep the tray from moving out.
Loosen the stopper fixing screw on the lower right side of the
paper feed tray, move the stopper so it wont catch on the
frame and keep the tray from moving out.
2)
Remove the screw from the left and right rail.
3)
Remove the paper feed tray from the rail.
(2) Paper feed unit
1)
Pull out the paper feed tray.
2)
Open the upper cover.
3)
Remove the upper cabinet.
4)
Disconnect the connector, and remove the paper feed unit.
No.
Name
1
Paper feed tray
2
Paper feed unit
1
2
1
2
1
1
2
2
3
1
2
1
2
1
MX-LC11 MAINTENANCE 3 – 4
B. Drive section
(1) Drive unit
1)
Remove the rear cabinet.
2)
Disconnect the connector, and remove the drive unit.
3. Disassembly and assembly in each
unit
A. Paper feed section
(1) Paper feed unit
a. Paper pickup roller, paper feed roller, separation roller
1)
1)
Open the upper cover.
2)
Remove the paper pickup roller and the paper feed roller.
No.
Name
1
Drive unit
1
1
1
1
1
2
1
1
1
1
2
No.
Name
1
Paper pickup roller
2
Paper feed roller
3
Separation roller
4
Torque limiter
5
Transport roller
1
4
2
5
3
1
1
2
2
3
Click on the first or last page to see other MX-LC11 service manuals if exist.