DOWNLOAD Sharp MX-FNX9 Service Manual ↓ Size: 11.83 MB | Pages: 58 in PDF or view online for FREE

Model
MX-FNX9
Pages
58
Size
11.83 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / MX-FNX9 Service Manual (Complete)
File
mx-fnx9.pdf
Date

Sharp MX-FNX9 Service Manual ▷ View online

MX-FNX9  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 2
No.
Signal
Name
Type
Function/Operation
Output
1
FULD
Tray upper limit sensor
Photo interrupter
Detects the upper limit position of the 
paper load tray up/down shift area.
TP1 is driven to “L” at the upper limit 
position.
2
FMLLD
Tray intermediate lower limit 
sensor
Photo interrupter
Detects the intermediate position of the 
paper load tray up/down shift area.
TP2 is driven to “L” at the intermediate 
position.
3
FLLD
Tray lower limit sensor
Photo interrupter
Detects the lower limit position of the 
paper load tray up/down shift area.
TP3 is driven to “L” at the lower limit 
position.
4
FBED
Tray paper empty sensor
Photo interrupter
Detects paper empty in the paper load 
tray. 
TP4 is driven to “L” when paper is 
provided.
5
FSLD1
Paper surface sensor 1
Photo interrupter
Detects the surface position of paper on 
the tray in combination of the both sensors 
outputs. 
*Refer to the separate table outside the 
column. 
6
FSLD2
Paper surface sensor 2
Photo interrupter
7
FSTHPD
Stapler HP sensor
Photo interrupter
Detects the home position of the stapler 
unit in F/R direction shift.
TP7 is driven to “H” at the home position. 
8
FSTPD
Empty sensor
Photo interrupter
Detects paper empty on the process tray. 
TP8 is driven to “H” when paper is 
provided. 
9
FFJHPD
Alignment plate HP sensor F
Photo interrupter
Detects the home position of the alignment 
guide on F side. 
TP9 is driven to “L” at the home position.
10
FRJHPD
Alignment plate HP sensor R
Photo interrupter
Detects the home position of the alignment 
guide on R side.
TP10 is driven to “L” at the home position.
11
FED
Inlet port sensor
Photo interrupter
Detects paper in the inlet port of the 
finisher.
TP11 is driven to “H” when paper is 
provided. 
12
FRLD
Roller up/down sensor
Photo interrupter
Detects the upper standby position of up/
down movement of the bundle exit roller.
TP12 is driven to “L” when the roller 
reaches the upper standby position. 
13
FBRD
Take-up belt sensor
Photo interrupter
Detects up/down positions of the take-up 
belt. 
TP13 is driven to “L” when the take-up belt 
is on the upper side. 
14
FDSW
Front cover switch
Photo interrupter
Detects open/close of the jam release 
cover in the front section. 
TP15 is driven to “L” when the cover is 
closed. 
15
FJPD
Alignment plate position sensor
Photo interrupter
Detects entry of the process section rear 
edge stopper into the opening of the 
stapler and inhibits stapling.
TP50 is driven to “L” when the stopper 
enters the opening of the stapler. 
16
FSHPD
Stapler home sensor
Detects the home position of the stapling 
mechanism. (Sensor built in the stapler 
unit)
TP51 is driven to “H” at the home 
(standby) position. 
17
FSD
Staple empty sensor
Detects staple empty. (Sensor built in the 
stapler unit)
TP53 is driven to “L” when staple empty.
18
FSTD
Self priming sensor
Detects the staple feed is completed and it 
is ready for stapling. (Sensor built in the 
stapler unit)
TP52 is driven to “H” when in the ready 
state. 
FSLD1
FSLD2
State
TP5
TP6
“L”
“H”
The paper detection lever is in the save position.
“H”
“H”
The paper surface is upper than the reference level.
“H”
“L”
The paper surface is at the reference level. 
“L”
“L”
The paper surface is lower than the reference level.
MX-FNX9  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 3
(2) MX-PNX1A/B/C/D
No.
Signal
Name
Type
Function/Operation
Output
1
FPDD
Full sensor
Photo interrupter
Detects full of the punch dust container.
When full, TP2 on the punch PWB remains 
“H” level. 
2
FPHPD
Punch position 
sensor
Photo interrupter
Detects the home position of the punch up/down 
shift. 
TP47 on the control PWB of the inner finisher 
is driven to “H” at the home position.
3
FPRPD
Rear position 
sensor
Photo interrupter
Detects the lower limit position of 3-hole side up/
down shift in 2/3-hole punching.
TP48 on the control PWB of the inner finisher 
is driven to “H” at the lower limit position.
4
FPSHPD
Horizontal shift 
HP sensor
Photo interrupter
Detects the home position in the punch position 
horizontal resist correction mechanism. 
TP49 on the control PWB of the inner finisher 
is driven to “H” at the home position.
5
FPPEND
Paper rear edge 
sensor
Transmission type 
sensor
Detects the lead edge and the rear edge of paper 
to be punched. 
TP54 on the control PWB of the inner finisher 
is driven to “L” when paper is provided. 
6
FPPD1
Paper horizontal 
resist sensor 1
Transmission type 
sensor
Detects the paper edge in the rear side of B5R or 
7.25" x 10" R size width direction of the machine. 
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
7
FPPD2
Paper horizontal 
resist sensor 2
Transmission type 
sensor
Detects the paper edge in the rear side of 16K-R 
size width direction of the machine.
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
8
FPPD3
Paper horizontal 
resist sensor 3
Transmission type 
sensor
Detects the paper edge in the rear side of 8.5" 
x14", 8.5" x 11"R, 8.5" x 13", or A4R size width 
direction of the machine.
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
9
FPPD4
Paper horizontal 
resist sensor 4
Transmission type 
sensor
Detects the paper edge in the rear side of B4 or 
B5 size width direction of the machine.
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
10
FPPD5
Paper horizontal 
resist sensor 5
Transmission type 
sensor
Detects the paper edge in the rear side of 11" x 
17", 8.5" x 11", 8K, or 16K size width direction of 
the machine.
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
11
FPPD6
Paper horizontal 
resist sensor 6
Transmission type 
sensor
Detects the paper edge in the rear side of A3 or 
A4 size width direction of the machine.
TP55 on the control PWB of the inner finisher 
is driven to “L” when paper is provided.
1
3
4
6
7
8
9
10
11
2
5
MX-FNX9  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 4
C. Motors, solenoids, and PWB
(1) MX-FNX9
No.
Signal
Name
Function
1
FFSM
Staple motor
Drives the stapling mechanism. (Stapler unit built-in motor)
2
FSM
Staple shift motor
Shifts the stapler unit in the F/R direction. 
3
FTLM
Tray motor
Drives the paper load tray up/down. 
4
FFJM
Alignment motor F
Drive the alignment guide on the F side.
5
FRJM
Alignment motor R
Drive the alignment guide on the R side.
6
FSWM
Roller upper/lower roller
Drives the bundle exit roller up/down.
7
FAM
Bundle exit motor
Drives the bundle exit roller and the paddle. 
8
FRM
Transport motor
Drives the inlet port roller, the feed roller, and the take-up belt. 
9
FPDS
Paddle one-rotation solenoid
Trigger solenoid for paddle one-rotation.
10
FSLS
Paper surface detection solenoid
Drives the lever for paper holding and detection of the tray paper surface. 
11
FBRS
Belt separation solenoid
Trigger solenoid for up/down shift of the take-up belt. 
12
FINRPS
Flapper solenoid
Drives the flapper to select the entry path between the finisher inside and the reverse path. 
13
FFAN
Fan
Cools the inlet port of the finisher. 
14
Control PWB
Controls the inner finisher.
7
1
8
13
2
6
4
5
3
12
14
9
10
11
MX-FNX9  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 5
(2) MX-PNX1A/B/C/D
No.
Signal
Name
Function
1
FPNM
Punch motor
Drives the punch unit up/down.
2
FPSM
Punch horizontal resist motor
Shifts the punch unit to the center of paper. 
3
Punch PWB
Controls the punch unit. 
4
LED light emitting PWB
Detects the paper rear edge and the punch horizontal resist. 
5
LED light receiving PWB
Detects the paper rear edge and the punch horizontal resist.
1
2
3
4
5
Page of 58
Display

Click on the first or last page to see other MX-FNX9 service manuals if exist.