Sharp MX-FNX9 (serv.man27) Service Manual / Technical Bulletin ▷ View online
Date:
23
rd
October 2008
Model:
MX-FNX9
Ref.:
001
Colour:
White
Page:
1 of 1
TECHNICAL BULLETIN
ROM UPGRADE ..... (1).
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-604
1. Model Name:
MX-FNX9 (Options for MX-2600 series/3100 series/4100 series/5000 series)
2. Description:
Upgrade of Finisher ROM
Note) The inner finisher to be installed on the MX-4100 or MX-5000 series must be
upgraded to this version or higher.
upgraded to this version or higher.
From middle of October 2008 production
ROM control No.
Version
A01 010102
Item of change: Countermeasures for glitches
1. If the final sheet of a bundle was plain paper larger than A4 paper or letter and the first sheet
of the next bundle was paper equal or smaller than A4 paper or letter in mixed jobs of the
same width, the tip of the next sheet sometimes touched the paddle during bundle ejection.
This glitch has been fixed.
same width, the tip of the next sheet sometimes touched the paddle during bundle ejection.
This glitch has been fixed.
2. When a sheet on the tray was removed during job stop because "paper full" was detected, the
tray moved up immediately after the removal. This glitch has been fixed so that the tray
moves up 3 seconds after the form is removed.
moves up 3 seconds after the form is removed.
3. Countermeasures for MX-4100 series, and MX-5000 series (no problem in MX-2600 series
and MX-3100 series)
- The heavy paper ejected to the finisher tray sometimes contained "stripe." This glitch has
been fixed.
- When B5 paper was ejected, a matching fault sometimes occurred. This glitch has been
fixed.
- In the non-sort punch job of paper less than A4 paper or letter, the punch holes of the
second and subsequent forms of a bundle were sometimes dislocated by 3 mm (max.).
Display