MX-FNX9 (serv.man17). COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-FNX9 (serv.man17)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
289.5 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER
File
mx-fnx9-sm17.pdf
Date

View Sharp MX-FNX9 (serv.man17) Technical Bulletin online

 
 
 
 
Technical Report
 
DIGITAL FULL COLOR COPIER(OPTION) : MX-FNX9/FNX1/PNX1 
No.  : CCE-1223
Date : Dec. 3, 2013
 
 
C
Document Systems Unit 
1/3 
SHARP CORPORATION
COUNTERMEASURE FOR PAPER JAM 
(POD2_S) AROUND ENTRANCE SECTION OF 
INNER FINISHER   
 
1. Model Name: 
MX-FNX9 (Option for MX-4140N/4141N/5140N/5141N,   
   MX-4110N/4111N/4112N/5110N/5111N/5112N,  
   MX-4100N/4101N/5000N/5001N, 
MX-2301N/2600G/3100G/2600N/3100N, 
   MX-M283N/M363N/M453N/M503N/M363U/M453U/M503U) 
  MX-PNX1A/B/C/D 
(Option 
for MX-4140N/4141N/5140N/5141N,   
 
 
 
 
MX-4110N/4111N/4112N/5110N/5111N/5112N,  
    MX-4100N/4101N/5000N/5001N, 
MX-3500N/3501N/4500N/4501N, 
    MX-2301N/2600G/3100G/2600N/3100N, 
 
    MX-1800N/2300G/2700G/2300N/2700N, 
 
    MX-M283N/M363N/M453N/M503N/M363U/M453U/M503U) 
 
 
MX-FNX1 (Option for MX-3500N/3501N/4500N/4501N,   
    
MX-1800N/2300G/2700G/2300N/2700N) 
 
2. Symptom: 
When installing the inner finisher (MX-FNX9) to MX-4140N/4141N/5140N/5141N,   
 
 
the paper is hitting to the entrance area of the inner finisher, which may cause the paper   
  jam 
(POD2_S 
etc). 
 
 
 
Please note that this is the symptom caused relating to the ejecting sponge used only for   
 
 
the paper exit unit of MX-4140N/4141N/5140N/5141N and this ejecting sponge is not   
 
 
used for other models and therefore this symptom is not applied to other models. 
 
3. Description: 
To prevent the paper from hitting to the entrance area of the inner finisher, the following   
 
 
modifications have been made:   
 
 
  - Mounting hole positions of Dummy Punch Unit of Bracket Unit are changed. 
 
 
  - The shape of the Mylar affixed to the entrance of Dummy Punch Unit is changed. 
 
 
(Packing control No. "C00" or later indicate the modified parts so we recommend you   
 
 
  should use MX-FNX9 with packing control No. "C00" or later for   
   
MX-4140N/4141N/5140N/5141N.) 
 
 
 
 
2/3 
 
 
- Change of the dimension of Mylar (MX-FNX9/FNX1/PNX1) 
 
 
 
 
- Mylar affixation position (MX-FNX9/FNX1) 
 
 
 
 
 
 
 
 
 
 
 
- Change of hole positions of Bracket Unit (MX-FNX9/FNX1)   
 
 
 
 
 
 
 
 
 
- Identification of current/new Bracket Unit (MX-FNX9/FNX1)     
 
 
 
 
 
 
 
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
 Before change: 12mm 
  After change: 13.1mm 
 Modified parts: 
  "N" mark is added. 
Dummy Punch Unit
  Protruded amount of Mylar
 Before change: 1.8mm 
  After change: 2.9mm 
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
Mylar
 
 
 
3/3 
 
- Change of the hole positions of Drawer Bracket (MX-PNX1) 
 
 
 
 
 
 
 
 
 
- Identification of current/new Drawer Bracket 
 
 
 
 
 
 
 
 
- Mylar affixation position (MX-PNX1) 
 
 
 
 
 
 
 
4. Action: 
From mid-September 2013 production 
 
5. Parts Action: 
Ref. 
No. 
Model 
name 
Version P/G No.
Current parts 
New parts 
Price
rank
Q'ty
Parts name 
Effective
time 
Inter-
change-
ability
Parts code 
Parts code 
MX-FNX9 
MX-FNX1 
ALL 
13-18
0CW4141K085//
0CW4141K08501
BS
DUMMY PUNCH 
UNIT 
2013/9
Mid 
13-21
0CW4141K080B/
0CW4141K08001
BD
BRACKET UNIT 
13- 
0CW1035P301//
0CW4F521810//
AF
MYLAR 
MX-PNX1 
1-9 
0CW1035P102//
0CW1035P10201
AL
DRAWER BRACKET
2-21 
0CW1035P301//
0CW4F521810//
AF
MYLAR 
<Interchange> 
1. Interchangeable. 
4. Not interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of   
related parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with 
specified ones for maintaining the safety and performance of the set. 
 
  Move the mounting 
  hole position of 
  Drawer to 1.5mm 
 lower side. 
Modified parts: "N" mark is added. 
Punch Unit
  Protruded amount of Mylar
 Before change: 1.8mm 
  After change: 2.9mm 
  Move the mounting 
  screw hole position of 
  Drawer to 1.5mm lower
 side. 
Mylar
Page of 3
Display

Download Sharp MX-FNX9 (serv.man17) Technical Bulletin

Here you can view online or download Sharp MX-FNX9 (serv.man17) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-FNX9 (serv.man17) Copying Equipment. Information contained in Sharp MX-FNX9 (serv.man17) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).