Sharp MX-FNX5 (serv.man7) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
MX-FNX5 - Instructions for Replacing the Staple Gear
* Remove the stapler unit from the finisher. For instructions on mounting, refer to the MX-FNX5
Service Manual.
(1) Remove 1 E ring and 2 screws, and then remove the coupling plate unit.
(Screw x2, E ring x1)
(Screw x2, E ring x1)
(2) Remove the gear plate from the drive shaft.
(3) Remove the stapler gear from the drive shaft.
Sharp Electronics (UK) Ltd., Technical Services Group
(4) Apply grease (UKOG-0307FCZZ: furoyl G-313S) to the inner and outer wall around the entire
circumference of the cam groove of the new staple gear.
(5) Mount the staple gear while keeping the cam groove of the staple gear aligned to the arm
ring roller.
ring roller.
(6) Align the gear plate to the protrusion of the staple gear, and then mount the gear plate to
the staple gear.
Sharp Electronics (UK) Ltd., Technical Services Group
(7) Apply grease (UKOG-0307FCZZ: furoyl G-313S) to the drive shaft hole on the coupling plate
unit.
(8) Mount the coupling plate with 2 screws and 1 E ring.(Screw x2, E ring x1)
Sharp Electronics (UK) Ltd., Technical Services Group
(7) Apply grease (UKOG-0307FCZZ: furoyl G-313S) to the drive shaft hole on the coupling plate
unit.
(8) Mount the coupling plate with 2 screws and 1 E ring.(Screw x2, E ring x1)
Display