Sharp MX-FN30 / MX-FN31 (serv.man12) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
28
th
Nov 2016
Model:
See below
Ref.:
CCE 1661
Colour:
White
Page:
1 of 2
TECHNICAL BULLETIN
DESIGN CHANGE OF 3K FINISHER
1. Model Name:
MX-FN30/FN31/PN16B/PN16C (Option for MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
Following sections of 3K finisher have been changed as below:
(1) Due to the design change of the caulking shaft on the rear frame, E-ring has been
disused.
(2) When clearing the jammed dog-eared paper in a downward direction, the paper
gets under the plate of the paper feed guide (lower) upper, which may deform the plate.
To prevent the dog-eared paper from getting under the plate, the design of the plate
mounted to the paper feed guide (lower) upper has been changed.
-MX-FN30/FN31
(1) Location of the eliminated E-ring:
(Excerpt from Parts Guide 19 PAPER FEED DISPOSE ASSEMBLY3)
Before change
After change
E-ring disused
Design of
caulking shaft changed
E-ring disused
Sharp Electronics (UK) Ltd., Document Systems Support
-MX-PN16/B/PN16C
(2) Design change of the plate on the paper feed guide (lower) upper
Location of the plate (Excerpt from Parts Guide 39 PUNCH SLIDE ASSEMBLY)
Before change
After change
3. Action:
(1), (2) From mid-July 2016 production
4. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-FN30
MX-FN31
MX-FN31
ALL
19-132 0CWXD21100505
Change of QTY
9 → 8
AB
8
E-ring
2016/7
Mid
1
2
MX-PN16B
39-4
0CWFM1H2450//
0CW4M511980//
BC
1
GUIDE, PAPER
FEED, LOWER
FEED, LOWER
1
MX-PN16C
39-4
0CWFM1H2630//
0CW4M512000//
BC
1
GUIDE, PAPER
FEED, LOWER
FEED, LOWER
1
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Mounting position of the plate
Bending angle
Bending dimension extended
Before change: 160° After change: 2mm
Before change: 129.6° After change: 4.49mm
Before change: 129.6° After change: 4.49mm
Display