Sharp MX-FN21 / MX-FN22 (serv.man2) Handy Guide ▷ View online
Maintenance
13
Document Solutions After Sales Service
Removing the rear paper return assy.
• Remove 2 x securing screws, and open the finisher controller base (Fig. 6)
• Turn the dial under the staple unit in the direction shown to move the stapler unit back to
the front (Fig. 7)
• From the rear, where the staple unit goes, find the inner cir-clip on the rear roller arm
assy. (White), and remove the cir-clip (Fig. 8)
• Slide the rear bushing towards the front and remove the rear roller arm assy. (Fig. 9)
Fig.6
Fig. 7
Fig. 8
Fig. 9
Front
Frame
Rear
Frame
Maintenance
14
Document Solutions After Sales Service
Refitting of Paper re-turn rollers (front/rear)
When re-assembling be careful of the following items.
Install so that 2 projections [A] of the bearings are placed in the opening sections [B] of
the roller unit holder
Install so that the drive shaft arm grips the roller shaft
Simulations
15
Document Solutions After Sales Service
Simulations
16
Document Solutions After Sales Service
Click on the first or last page to see other MX-FN21 / MX-FN22 (serv.man2) service manuals if exist.