Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) Service Manual ▷ View online
MX-7040N MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding)) 14 – 6
4)
Remove the screw, and remove the front lower cabinet 1.
Remove the fixing screw of the front lower cabinet 2.
Remove the fixing screw of the front lower cabinet 2.
5)
Remove the screws, and slide to the left the front lower cabinet
2, and remove it.
2, and remove it.
6)
Remove the fixing tapes.
7)
Remove the screws, and remove the rear lower cover.
8)
Remove the fixing tapes.
9)
Loosen the caster fixing screws.
10) Remove the screw, and remove the spanner installed inside
the front door.
MX-7040N MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding)) 14 – 7
11) Turn the bolt for which the adjustment is necessary, and adjust
to become it within the range of specification.
12) Check to insure that the upper and lower clearances between
the main unit and the finisher are even.
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the front lower cabinet 2 with the fixing screws.
MX-7040N MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding)) 14 – 8
16) Install the front lower cabinet 1 with the fixing screws.
17) Attach the cabinet fixing screw.
18) Install the spanner for adjustment to inside the front door with
screw.
19) Close the front door.
F. Connection of the saddle stitch finisher
1)
Engage the saddle stitch finisher to the main unit.
2)
Open the front door of saddle stitch finisher.
3)
Fix the saddle stitch finisher to the main unit with the step
screw B (Packed items (No.4)).
screw B (Packed items (No.4)).
MX-7040N MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding)) 14 – 9
4)
Close the front cover.
5)
Remove the screw, and remove the connector cover on rear
side of the finisher.
side of the finisher.
6)
Install the Step screw B (Packed items (No.4)).
7)
Attach the connector cover on rear side of the finisher with the
fixing screw.
fixing screw.
G. Connection of connector to the main unit
1)
Connect two connectors of the saddle stitch finisher to the
main unit, and tighten the screws.
main unit, and tighten the screws.
H. Staple position label attachment
1)
Attach the staple position label (Packed items) to the position
indicated in the figure.
For scanner (Packed items (No.9))
indicated in the figure.
For scanner (Packed items (No.9))
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) service manuals if exist.