DOWNLOAD Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) Service Manual ↓ Size: 2.24 MB | Pages: 10 in PDF or view online for FREE

Model
MX-FN19 MX-FN20 MX-PN12 (serv.man4)
Pages
10
Size
2.24 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / MX-FN20 Installation Manual
File
mx-fn19-mx-fn20-mx-pn12-sm4.pdf
Date

Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) Service Manual ▷ View online

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 5
D. Check of the connected position of main unit 
and finisher
1)
Insert the rail of the finisher into the slit on the rail reception
sheet metal of the main unit, install the finisher.
2)
Remove the screw, and remove the connector cover on rear
side of the finisher.
3)
Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.
* When not the range of specification, execute the following
adjustment. If the adjustment is not required, Progress to the
procedure of "I. Connection of the saddle stitch finisher".
E. Adjustment
1)
Remove the finisher from the main unit.
2)
Open the front door.
3)
Remove the cabinet fixing screw.
MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 6
4)
Remove the screw, and remove the front lower cabinet 1.
Remove the fixing screw of the front lower cabinet 2.
5)
Remove the screws, and slide to the left the front lower cabinet
2, and remove it.
6)
Remove the fixing tapes.
7)
Remove the screws, and remove the rear lower cover.
8)
Remove the fixing tapes.
9)
Loosen the caster fixing screws.
10) Remove the screw, and remove the spanner installed inside
the front door.
MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 7
11) Turn the bolt for which the adjustment is necessary, and adjust
to become it within the range of specification.
12) Check to insure that the upper and lower clearances between
the main unit and the finisher are even.
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the front lower cabinet 2 with the fixing screws.
MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 8
16) Install the front lower cabinet 1 with the fixing screws.
17) Attach the cabinet fixing screw.
18) Install the spanner for adjustment to inside the front door with
screw.
19) Close the front door.
F. Connection of the saddle stitch finisher
1)
Engage the saddle stitch finisher to the main unit.
2)
Open the front door of saddle stitch finisher.
3)
Fix the saddle stitch finisher to the main unit with the step
screw B (Packed items (No.4)).
Page of 10
Display

Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) service manuals if exist.