DOWNLOAD Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) Service Manual ↓ Size: 2.24 MB | Pages: 10 in PDF or view online for FREE

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 4

NOTE: When the saddle finisher is installed, first install the paper

pass unit, and then install the saddle finisher.

NOTE: When the saddle finisher and punch unit is installed at the

same time, first install the punch unit, and then install the
saddle finisher.

1)

Install the rail (Packed items (No.5)) to the saddle stitch fin-
isher with the fixing screws (Packed items (No.1)).

2)

Install the rail reception sheet metal (Packed items (No.6)) to
the main unit with the fixing screws (Packed items (No.2)).

1)

Install the connection fixture R (Packed items (No.8)) to the
main unit with the fixing screws (Packed items (No.3)).

2)

Install the connection fixture F (Packed items (No.7)) to the
main unit with the fixing screws (Packed items (No.3)).

1)

Attach the cushion (S) (Packed items), the cushion (M)
(Packed items) and the cushion (L) (Packed items) to the posi-
tion indicated in the figure.

Cushion A
attachment
position

Cushion B
attachment
position

Cushion C
attachment
position

Cushion A attachment
reference (Front edge of
the relay path left
cabinet)

Cushion A attachment
reference (Upper side of
the groove in the relay
path left cabinet)

Cushion B attachment
reference (Upper edge
of the machine left
cabinet)

Cushion B attachment
reference (Rear edge of
the handle hole)

Cushion C attachment
reference (Front edge of
the upper cushion)

Cushion C attachment
reference (Upper edge of the
machine left lower cabinet)

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 5

1)

Insert the rail of the finisher into the slit on the rail reception
sheet metal of the main unit, install the finisher.

2)

Remove the screw, and remove the connector cover on rear
side of the finisher.

3)

Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.

* When not the range of specification, execute the following

adjustment. If the adjustment is not required, Progress to the
procedure of "I. Connection of the saddle stitch finisher".

1)

Remove the finisher from the main unit.

2)

Open the front door.

3)

Remove the cabinet fixing screw.

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 6

4)

Remove the screw, and remove the front lower cabinet 1.
Remove the fixing screw of the front lower cabinet 2.

5)

Remove the screws, and slide to the left the front lower cabinet
2, and remove it.

6)

Remove the fixing tapes.

7)

Remove the screws, and remove the rear lower cover.

8)

Remove the fixing tapes.

9)

Loosen the caster fixing screws.

10) Remove the screw, and remove the spanner installed inside

the front door.

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 7

11) Turn the bolt for which the adjustment is necessary, and adjust

to become it within the range of specification.

12) Check to insure that the upper and lower clearances between

the main unit and the finisher are even.

13) Tighten the caster fixing screws so that the indicator scale is

fit.

14) Install the rear lower cover with the fixing screws.

15) Install the front lower cabinet 2 with the fixing screws.