Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man3) Service Manual ▷ View online
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 5
H. Attach the front door
1)
Open the front door of the finisher.
2)
Temporarily fix the screw to the front door of the finisher.
3)
Hook the front door of punch unit to the temporarily fixed
screw.
screw.
4)
Attach the front cabinet with the four screws and tighten the
temporarily fixed screw completely.
temporarily fixed screw completely.
I. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
tighten the screws.
J. Punch position label attachment
1)
Attach the punch position label to the position indicated in the
figure.
For scanner (Package part of MX-FN19, MX-FN20)
figure.
For scanner (Package part of MX-FN19, MX-FN20)
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 6
For DSPF (Package part of MX-FN19, MX-FN20)
K. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
edge R2.5
Tangential line
of R2.5
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 6
For DSPF (Package part of MX-FN19, MX-FN20)
K. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
edge R2.5
Tangential line
of R2.5
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 6
For DSPF (Package part of MX-FN19, MX-FN20)
K. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
edge R2.5
Tangential line
of R2.5
Display