View Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man3) Service Manual online
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 2
2)
Attach the step screw A to the finisher.
3)
Remove the fixing screw, and remove the connector cover on
rear side of the finisher.
rear side of the finisher.
4)
Hang the punch unit on the step screws installed to the fin-
isher.
isher.
5)
Tighten the step screws bundled to the punch unit, fix the
punch unit.
punch unit.
6)
Attach the front cover and the front cover mounting fixture.
7)
Attach the front cover mounting fixture with the fixing screws.
In the case of the saddle stitch finisher (MX-FN20)
Install it using three fixing screws bundled to punch unit.
In the case of the saddle stitch finisher (MX-FN20)
Install it using three fixing screws bundled to punch unit.
In the case of the finisher (MX-FN19)
Remove the screw of the finisher, and reuse it. Install it using
the reuse screw, and three fixing screws bundled to punch
unit.
Remove the screw of the finisher, and reuse it. Install it using
the reuse screw, and three fixing screws bundled to punch
unit.
1
2
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 (serv.man3) service manuals if exist.