DOWNLOAD Sharp MX-FN12 Service Manual ↓ Size: 8.62 MB | Pages: 40 in PDF or view online for FREE

Model
MX-FN12
Pages
40
Size
8.62 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual (Complete)
File
mx-fn12.pdf
Date
PREV: Sharp MX-FN11 (serv.man15) Service Manual / Technical Bulletin

Sharp MX-FN12 Service Manual ▷ View online

MX-FN12  DISASSEMBLY AND ASSEMBLY  6 – 11
2)
Remove the screw, and remove the delivery roller lift motor.
C. Delivery movable tray
1)
Disengage the pawl, and remove the paper delivery tray.
2)
Remove the screw, and remove the front cabinet left.
3)
Remove the screw, and remove the left cabinet.
4)
Remove the screw, and remove the delivery movable tray.
D. Tray lift motor
1)
Remove the screw, and remove the earth wire. Remove the
screw, and disconnect the connector, and remove the machine
connector harness.
2)
Remove the screw from the bottom, and remove the inside
cabinet rear.
MX-FN12  DISASSEMBLY AND ASSEMBLY  6 – 12
3)
Remove the screw, and remove the tray lift motor and discon-
nect the connector.
E. Lift plate
1)
Remove the screw, and remove the lift plate. 
NOTE: When installing the lift plate with the tray lift motor disas-
sembled, install so that the gear faces down.
F. Delivery tray upper limit detector
1)
Disconnect the connector, and remove the delivery tray upper
limit detector.
G. Delivery tray lower limit detector
1)
Disconnect the connector, and remove the delivery tray lower
limit detector.
H. Paddle solenoid
1)
Remove the inside cabinet front.
2)
Disconnect the connector. Remove the screw, and remove the
paddle solenoid unit.
3)
Remove the screw, and remove the paddle solenoid.
MX-FN12  DISASSEMBLY AND ASSEMBLY  6 – 13
I. Paper level detector
1)
Remove the paper level detector, and disconnect the connec-
tor.
J. Paper delivery motor
1)
Remove the screw, and remove the paper delivery motor unit
and disconnect the connector.
NOTE: When installing, hang the belt on the paper delivery motor
gear and install.
2)
Remove the screw, and remove the paper delivery motor.
MX-FN12  DISASSEMBLY AND ASSEMBLY  6 – 14
4. Others
A. Control PWB
1)
Disconnect the connector. Remove the screw, and remove the
control PWB.
B. Control PWB cooling fan
1)
Remove the screw. Remove the control PWB cooling fan, and
disconnect the connector.
NOTE: When the control PWB cooling fan is removed, the Mylar is
removed together. Be careful not to lose it, and be sure to
install it again.
NOTE: When installing, arrange so that the fan label faces to the
right.
6-6
E
6-5
U
6-14
E
6-14
E
6-7
U
Others
Paper transport motor unit
Control PWB cooling fan
Control PWB
ST tray unit
Rear edge take-up roller solenoid
Page of 40
Display

Click on the first or last page to see other MX-FN12 service manuals if exist.

RANDOM: