Sharp MX-DE12 / MX-DE13 / MX-DE14 Service Manual ▷ View online
MX-DE14 MAINTENANCE 3 – 7
B. Drive section
(1) 1CS drive unit
1)
Remove the rear cabinet and the right rear cabinet.
2)
Remove the mounting plate.
3)
Disconnect the connector, and remove the 1CS drive unit.
(2) 2CS drive unit
1)
Remove the rear cabinet and the right rear cabinet.
2)
Remove the belt and the linkage plate.
3)
Disconnect the connector, and remove the 2CS drive unit.
No.
Name
1
1CS drive unit
2
2CS drive unit
3
3CS drive unit
1
2
3
1
1
1
1
2
3
1
1
1
2
1
2
1
1
1
1
1
1
2
3
3
1
2
2
2
1
1
1
1
1
MX-DE14 MAINTENANCE 3 – 8
4)
Remove the belt inside of the 2CS derive unit and the 3CS
drive unit.
drive unit.
(3) 3CS drive unit
1)
Remove the rear cabinet and the right rear cabinet.
2)
Remove the belt and the linkage plate.
3)
Disconnect the connector, and remove the 3CS drive unit.
4)
Remove the belt inside of the 2CS derive unit and the 3CS
drive unit.
drive unit.
1
1
1
1
2
3
3
1
2
2
2
1
1
1
MX-DE14 MAINTENANCE 3 – 9
3. Disassembly and assembly in each
unit
A. Tray paper feed section
(1) Tray paper feed unit
a. Paper pickup roller, paper feed roller, separation roller
1)
1)
Remove the paper feed tray.
2)
Remove the paper guide.
3)
Remove the paper pickup roller and the paper feed roller.
4)
Remove the separation roller.
b. Vertical transport roller 1, vertical transport roller 2
1)
1)
Remove the paper feed tray.
2)
Remove the tray paper feed unit.
3)
Clean the vertical transport roller 1 or the vertical transport
roller 2.
roller 2.
No.
Name
1
Paper pickup roller
2
Paper feed roller
3
Separation roller
4
Vertical transport roller 1
5
Vertical transport roller 2
6
Transport roller 1
7
Transport roller 3
8
Transport roller 5
9
Torque limiter
3
7
1
2
3
9
5
8
1
2
9
1
2
3
9
6
4
MX-DE14 MAINTENANCE 3 – 10
c. Transport roller 1, transport roller 3, transport roller 5
1)
1)
Remove the paper feed tray.
2)
Remove the tray paper feed unit.
3)
Remove the E-ring and the bearing. Remove the paper feed
lower PG unit.
lower PG unit.
4)
Clean the transport roller 1, the transport roller 3, or the trans-
port roller 5.
port roller 5.
d. Torque limiter
1)
1)
Remove the paper feed tray.
2)
Remove the tray paper feed unit.
3)
Remove the E-ring and the bearing. Remove the paper feed
lower PG unit.
lower PG unit.
4)
Remove the spring, and remove the support plate. Remove
the spring and remove the separation pressure release plate.
the spring and remove the separation pressure release plate.
5)
Remove the separation roller. Remove the E-ring and the
shaft. Remove the torque limiter.
shaft. Remove the torque limiter.
2
2
2
1
2
3
2
2
2
2
1
2
3
2
1
2
3
4
5
2
4
1
2
3
Click on the first or last page to see other MX-DE12 / MX-DE13 / MX-DE14 service manuals if exist.