DOWNLOAD Sharp MX-CF11 / MX-6240N / MX-7040N (serv.man3) Service Manual ↓ Size: 582.62 KB | Pages: 5 in PDF or view online for FREE

Model
MX-CF11 MX-6240N MX-7040N (serv.man3)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
582.62 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / MX-CF11 Installation Manual
File
mx-cf11-mx-6240n-mx-7040n-sm3.pdf
Date

Sharp MX-CF11 / MX-6240N / MX-7040N (serv.man3) Service Manual ▷ View online

MX-7040N  MX-CF11 (INSERTER)  17 – 5
9)
Attach the front inner cover to the tray unit. (2 screws)
10) Attach the accessory cover (Packed items No. 1) with the
screw (Packed items No. 17) and the winding bushing (Packed
items No. 21).
I.
Cable connection
1)
Connect the connector to the decurler unit.
J. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height and the tilt adjustment are
as follows.
Height: The difference of level between top surface of the adjacent
device is within 
2mm.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within 
2mm.
1)
Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
2)
Turn the adjuster bolts (1) and (2) in the above figure, and
adjust the height.
3)
Turn the adjuster bolts (3) and (4) in the above figure, and
adjust the tilt.
MX-7040N  MX-CF11 (INSERTER)  17 – 5
9)
Attach the front inner cover to the tray unit. (2 screws)
10) Attach the accessory cover (Packed items No. 1) with the
screw (Packed items No. 17) and the winding bushing (Packed
items No. 21).
I.
Cable connection
1)
Connect the connector to the decurler unit.
J. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height and the tilt adjustment are
as follows.
Height: The difference of level between top surface of the adjacent
device is within 
2mm.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within 
2mm.
1)
Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
2)
Turn the adjuster bolts (1) and (2) in the above figure, and
adjust the height.
3)
Turn the adjuster bolts (3) and (4) in the above figure, and
adjust the tilt.
MX-7040N  MX-CF11 (INSERTER)  17 – 5
9)
Attach the front inner cover to the tray unit. (2 screws)
10) Attach the accessory cover (Packed items No. 1) with the
screw (Packed items No. 17) and the winding bushing (Packed
items No. 21).
I.
Cable connection
1)
Connect the connector to the decurler unit.
J. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height and the tilt adjustment are
as follows.
Height: The difference of level between top surface of the adjacent
device is within 
2mm.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within 
2mm.
1)
Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
2)
Turn the adjuster bolts (1) and (2) in the above figure, and
adjust the height.
3)
Turn the adjuster bolts (3) and (4) in the above figure, and
adjust the tilt.
MX-7040N  MX-CF11 (INSERTER)  17 – 5
9)
Attach the front inner cover to the tray unit. (2 screws)
10) Attach the accessory cover (Packed items No. 1) with the
screw (Packed items No. 17) and the winding bushing (Packed
items No. 21).
I.
Cable connection
1)
Connect the connector to the decurler unit.
J. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height and the tilt adjustment are
as follows.
Height: The difference of level between top surface of the adjacent
device is within 
2mm.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within 
2mm.
1)
Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
2)
Turn the adjuster bolts (1) and (2) in the above figure, and
adjust the height.
3)
Turn the adjuster bolts (3) and (4) in the above figure, and
adjust the tilt.
Page of 5
Display

Sharp MX-CF11 / MX-6240N / MX-7040N (serv.man3) Service Manual ▷ Download