Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man43) Service Manual / Technical Bulletin ▷ View online
7) Close the drum positioning plate unit, and put the lock lever
upright to lock.
B. Cleaning of LSU's dust-proof glass
* Dust from the transfer belt or shutter or some other adjacent part
may fall onto the LSU during transport or installation. Be sure to
clean the dust-proof glass before checking the image quality.
1)
Remove the LSU cleaning rod from the front cover.
2) Face the cleaner downward, and slowly insert the LSU cleaning
rod into the LSU cleaning hole.
* The LSU cleaning hole is indicated with a label.
3) After inserting the LSU cleaning rod to the bottom, pull it out
until the lead edge of the cleaning unit is separated from the
LSU clearing surface. Repeat 2 - 3 times for cleaning.
4) There are four LSU cleaning holes. Clean all the holes similarly
5) Return the LSU cleaning rod to the front cover.
6) Install the waste toner box, and turn the lock lever to the left
until it stops to lock the waste toner box.
7) Close the front cover.
C. Installation of the operation manual pocket
1) Install the Operation Manual pocket (included in package)
cover to the left side of the machine.
a) First, insert the pawl on the lower side of the Operation
Manual pocket.
b) Then, lift the pawl on the upper side and insert it, and slide
down to install.
D. Tray size setup
1) Gently pull out the tray until it stops.
2) Adjust the guide plates A and B to the vertical size and the horizontal
size of paper.
The guide plates A and B are movable. Hold the fixing knob to
slide the guide plates A and B to match the paper size.
3) Insert the tray slowly.
The machine automatically detects the set paper size.
4) Close the cabinet and turn on the power.
IMPORTANT:
The toner concentration adjustment operation is
automatically
started, and "Please wait. Do not turn the power off." is
displayed.
When the toner concentration adjustment operation is
completed,
the message of "Install the toner cartridge." is displayed.
Do not make any operations until the message is
displayed.
E. Installation of toner cartridges
* The life of each toner cartridge is as follows:
Black toner cartridge: equivalent to approximately 2.5K (A4/LT
5%)
Color toner cartridge: equivalent to approximately 2.5K (A4/LT
5%)
1) Shake the toner cartridge (included in package) horizontally
several times.
2)
Remove the heat seal.
3)
Insert the toner cartridge horizontally and straight until it locks.
NOTE: Be sure to install the color cartridges to their proper
positions.
Avoid installation to a different color position.
NOTE: Do not forcibly insert the toner cartridge. Keep holding the
cartridge and completely insert it.
NOTE: When the machine is transported with the developing unit
removed, be sure to remove the toner cartridge. (if not
toner may become clogged.)
NOTE: Do not remove or insert the toner cartridge with the
developer cartridge removed.
[Color toner cartridge positions]
E. Installation of toner cartridges
* The life of each toner cartridge is as follows:
Black toner cartridge: equivalent to approximately 2.5K (A4/LT
5%)
Color toner cartridge: equivalent to approximately 2.5K (A4/LT
5%)
1) Shake the toner cartridge (included in package) horizontally
several times.
2)
Remove the heat seal.
3)
Insert the toner cartridge horizontally and straight until it locks.
NOTE: Be sure to install the color cartridges to their proper
positions.
Avoid installation to a different color position.
NOTE: Do not forcibly insert the toner cartridge. Keep holding the
cartridge and completely insert it.
NOTE: When the machine is transported with the developing unit
removed, be sure to remove the toner cartridge. (if not
toner may become clogged.)
NOTE: Do not remove or insert the toner cartridge with the
developer cartridge removed.
[Color toner cartridge positions]
Display