DOWNLOAD Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manual ↓ Size: 154 KB | Pages: 3 in PDF or view online for FREE

Model
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man30)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
154 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / PREVENTION OF F2-6 ERROR. TONER CARTRIDGE DRIVE AND STORAGE NOTES.
File
mx-c380p-mx-c400p-mx-b380p-mx-b382p-mx-b400p-sm30.pdf
Date
PREV: Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man29) Service Manual / Technical Bulletin

Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manual / Technical Bulletin ▷ View online

 
                                                                                                                                         
CCE 995 
 
 
 
 
 
Step 1) Let the cartridge with F2 trouble stand with the gear side up. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 2) Check if there is anything abnormal (e.g., damage and deformation) on the gear.  
 
       ・ If some abnormality is found on gear, ⇒  Replace with a new cartridge. 
 
       ・ If no abnormality is found on gear, ⇒  Proceed to the step 3).  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 3) Pick the gear up as shown in Figure1, and turn it back and forth (5 or more rounds) until it 
 
       gets lighter rotation. 
 
      Note: The angle to rotate back and forth must be within 90°. 
 
 
   If rotated back and forth over 90°, the toner churning sheet inside the cartridge, etc. 
 
 
   may get deformed. 
 
 
Step 4) Insert it to the main unit and check if F2 trouble is cleared.  
 
 
     When visiting your customers site please instruct users to store the cartridge horizontally or they may     
     encounter this symptom. 
 
 
     Please demonstrate to users the correct procedure for toner cartridge replacement as below. 
Within 90° 
Figure1
Examples of damaged gear 
Chipped gear tooth 
Dislocated D-cut on gear
Removed gear pawl
 
                                                                                                                                         
CCE 995 
 
 
 
 
                          Before installing a new toner cartridge, please do the following:- 
                                         
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User procedure at Toner Cartridge 
Replacement 
(1) Shake the box containing the cartridge up and down 5 
times
(2) Hold the box upside down and shake it 5 more times or 
so. 
 (3) Take the cartridge out of box and shake it from side to side 5
times 
(4)Install it to the copier 
machine. 
(4)Install it to the copier 
machine. 
 
                                                                                                                                         
CCE 995 
 
 
 
 
                          Before installing a new toner cartridge, please do the following:- 
                                         
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User procedure at Toner Cartridge 
Replacement 
(1) Shake the box containing the cartridge up and down 5 
times
(2) Hold the box upside down and shake it 5 more times or 
so. 
 (3) Take the cartridge out of box and shake it from side to side 5
times 
(4)Install it to the copier 
machine. 
(4)Install it to the copier 
machine. 
 
                                                                                                                                         
CCE 995 
 
 
 
 
                          Before installing a new toner cartridge, please do the following:- 
                                         
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User procedure at Toner Cartridge 
Replacement 
(1) Shake the box containing the cartridge up and down 5 
times
(2) Hold the box upside down and shake it 5 more times or 
so. 
 (3) Take the cartridge out of box and shake it from side to side 5
times 
(4)Install it to the copier 
machine. 
(4)Install it to the copier 
machine. 
Display

Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manual ↓ Size: 154 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Copying Equipment. Information contained in Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man30) Service Manuals

Preview DownloadPagesSize
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man6) Service Manual (Revised May 2016). Service Manual 127 57.04 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P Mac OS10.8 Driver Rquires Postscript option. Mac OS Drivers 2.94 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man7) Parts Guide (Revised Feb 2015). Service Manual / Parts Guide 78 20.72 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man8) PWB PARTS GUIDE Service Manual / Parts Guide 31 494.71 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man3) Firmware Service Manual / Specification 36.19 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man4) ROM UPGRADE ... (3). Service Manual / Specification 1 18.17 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man5) TREATMENT FOR F2-6 TROUBLE CODE Service Manual / Specification 3 663.37 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man39) IMPROVEMENT OF FUSER BEARING LOAD CHANGES TO UFR GEAR E RING. Service Manual / Technical Bulletin 2 59.79 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man27) CHANGE OF 8.5-INCH LCD OPERATION PANEL Service Manual / Technical Bulletin 6 947.08 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man28) ROM UPGRADE ... (6). Service Manual / Technical Bulletin 2 21.43 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man29) ROM UPGRADE ... (11). Service Manual / Technical Bulletin 2 23.06 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man31) IMPROVEMENTS OF PAPER FEED DRIVE UNIT CLUTCH SLIP Service Manual / Technical Bulletin 2 169.05 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man32) IMPROVEMENTS OF PAPER FEED DRIVE UNIT CLUTCH SLIP Service Manual / Technical Bulletin 2 169.05 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man33) IMPROVEMENT OF PRIMARY TRANSFER PRESSURE TO ELIMINATE UNEVEN COPY IMAGE DENSITY Service Manual / Technical Bulletin 2 76.45 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man34) CHANGE OF DRUM PRESENT PLATE ACTUATOR Service Manual / Technical Bulletin 2 95.38 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man35) PRODUCTION ROM CHANG, VERSION B01,ICU 0202W0, PCU 0110F0. Service Manual / Technical Bulletin 1 15.63 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man36) L4-12 OR POD1 MISFEED DUE TO CLEANING BLADE FLIP. Service Manual / Technical Bulletin 4 58.52 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man37) DEV SHUTTER CASE LOOSE Service Manual / Technical Bulletin 2 49.36 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man38) REMOVAL OF ALUMINUM TAPE FROM BYPASS ADU RHS DOOR -PRODUCTION EFFICIENCY. Service Manual / Technical Bulletin 2 35.97 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man22) COUNTERMEASURE FOR L4-16 TROUBLE DUE TO MALFUNCTION OF PRESSURE RELEASE DETECT ACTUATOR Service Manual / Technical Bulletin 2 43.46 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man40) JOBS NOT RECORDED IN JOB LOG Service Manual / Technical Bulletin 2 53.23 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man41) PRECAUTION WHEN REMOVING THE DEVELOPER UNIT Service Manual / Technical Bulletin 1 56.96 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man42) STRENGTHENING OF FUSER REVERSE ARM Service Manual / Technical Bulletin 1 31.46 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man43) CHANGES OF TONER CARTRIDGE INSTALLATION ON PDI Service Manual / Technical Bulletin 6 652.59 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man44) ARE-983-KEY SHEET FOR OPERATION PANEL Service Manual / Technical Bulletin 1 105.73 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man25) CHANGE OF BRAKE GEAR AND BRAKE ONEWAY SHAFT IN SHAPE TO IMPROVE Service Manual / Technical Bulletin 2 59.79 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man14) CCE-1690 REINFORCEMENT OF FUSING JOINT GEAR (GEAR(30T)) Service Manual / Technical Bulletin 2 116.56 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man15) CCE-1530 ENHANCEMENT OF PRESSURE RELEASE DETECT ACTUATOR Service Manual / Technical Bulletin 2 271.44 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man16) Starting Powder List (This list takes priority over information in Service Manuals). Service Manual / Technical Bulletin 4 66.25 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man17) IMPORTANT Handling of EEPROM's. Service Manual / Technical Bulletin 5 203.32 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man18) Treatment for F2-6 Trouble Code. Service Manual / Technical Bulletin 3 117.12 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man19) CHANGE OF HDD DUE TO DISCONTINUANCE OF PRODUCTION. Service Manual / Technical Bulletin 4 259.22 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man20) CHANGES DUE TO DISCONTINUATION OF MATERIAL OF TRANSFER CL BLADE Service Manual / Technical Bulletin 2 145.04 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man21) UNEVENNESS OF FR DENSITY DUE TO MISALIGNMENT OF PRESSURE BLOCK Service Manual / Technical Bulletin 2 74.45 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man23) IMPROVEMENT IN FIXING OUTSIDE HEAT FRAME BY CHANGING BOSS ANGLE OF FUSING UPPER FRAME F R Service Manual / Technical Bulletin 2 186.81 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man24) CCE1052 CHANGE OF 8.5-INCH LCD OPERATION PANEL, ETC. Service Manual / Technical Bulletin 7 948.16 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man26) STRENGTHENED PRESSURE RELEASE DETECT ACTUATOR AND PRESSURE Service Manual / Technical Bulletin 2 61.37 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man13) SAP Device Types for MX Colour devices. Driver / Update 3.18 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man12) PRODUCTION ROM CHANG, VERSION B01,ICU 0202W0, PCU 0110F0. Driver / Update 35.52 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man11) Rom Upgrade Driver / Update 2 26.18 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man10) Firmware Driver / Update 36.84 MB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man2) INFO REQUIRED FOR EE-PROM PROGRAMMING Handy Guide 1 32.92 KB
MX-C380P MX-C400P MX-B380P MX-B382P MX-B400P (serv.man9) How To Read A Main Machine Serial Number FAQ 1 16.5 KB

RANDOM: