Sharp MX-C301 / MX-C301W (serv.man4) Service Manual / Specification ▷ View online
3/18
Note for the use of the Remote Operation Function on MX-2600/3100 Series
When using the remote operation function on MX-2600/3100 series (excluding DSK models),
a single keystroke may be repeated several times. In this case a MFP setting is required to
prevent the keystroke repeating.
(As the Administrator Authority, press the System Setting, the Operation Settings, and then
select the Disable Auto Key Repeat check box.)
Note for the use of the SNMPv3 on MX-1810/2010/2310/3111
Please be sure Not to disable SNMPv1 setting.
Precautions for the MX-C382SC/C402SC
This software will perform the status update or the search by sending the SNMP command to
MFP.
If the status update or the search is performed for MFP in Auto Power Shut-Off Mode,
MX-C312SC/C382SC/C402SC may return the Ready condition. For this phenomenon, if the
interval of auto power shut-off is configured, MFP will automatically go to the Auto Power
Shut-Off Mode according to the setting.
Note for the use of SRDM in wireless LAN environment
Do not use SRDM to MFP connected to a network via a wireless LAN adapter. There is a
possibility that a part of SRDM functions do not work properly to MFP connected via a wireless
LAN. Change the MFP connection to a wired connection prior to using SRDM.
4/18
Procedures for Using Service
personnel-Oriented Functions
[Login to the service user]
1. Access to SRDM
The following Device View Initial screen will
appear.
2. Login
1) Clicking the Login icon from the above Device
View Initial screen, the following Login screen
will be displayed.
2) Enter your login name and password and click
the “Login” button.
Login Name: servicesrdm
Password: servicesrdm (same as Login Name)
This login name and password are set by default.
You can change the login name and password
by using the “User Management” function.
We recommend that you change the default
login name and password from the standpoint
of security.
2) Initial screen after login
5/18
[User management related procedure]
(1). User addition procedure
The procedure for adding Service User and
Advanced User is as follows:
1) On the Initial screen after login, click the
“Settings” tab.
2) On the above Settings Initial screen, click the
“User Management” menu.
The following User Management Initial screen
will appear.
3) On the User Management Initial screen, click
the “Add User” button.
4) Enter your user name, login name, password,
and select Service User or Advanced User
from the pull-down menu of the Role part, and
then click the “OK” button.
(2). User information editing procedure
The procedure for changing the role of the
registered user is as follows:
For other editing contents, refer to the User’s
Guide.
1) Select the user you want to edit (click User
Name from the User Name column).
In this example, User Name “Test” is selected.
2) From the pull-down menu of the Role part,
select Service User or Advanced User and click
the “OK” button.
6/18
[Login information registration related procedure]
(3). MFP/Administrator password registration
procedure
1) Login into SRDM and click on the “Login
Information” menu.
2) Once the device list is displayed, enter a
password for each device and then click the
“Save” button.
When setting all of the devices to the same
password, enter the password into Collective
Setting – Password in the upper part of the
screen and then click the “Apply to all
displayed MFPs” button.
Note: “Apply to all displayed MFPs” button affects
to listed devices on the screen.
[Firmware update related procedure]
(4). Procedure for adding/registering the update
firmware
1) Log into SRDM and click the “Firmware
Update” menu in the Device Management tab.
2) Click the “Add Firmware File” button.
The following Initial screen will appear when
clicking [Add Firmware File] button.
Select a firmware file by using the Browse
button. If necessary, write a comment in the
comment field, and press the “Add” button.
3) The added file will be displayed as follows:
Save