Sharp MX-BMX1 (serv.man2) Service Manual ▷ View online
TR-2-1
20 October 2010
Preventive Maintenance
2 PREVENTIVE MAINTENANCE SCHEDULE
2.1 PREVENTIVE MAINTENANCE SCHEDULE
Trimmer PREVENTIVE MAINTENANCE SCHEDULE is located in the Booklet
Maker MX-BMX1 Service Manual (
2)
Page intentionally blank
Replacement Adjustment
20 October 2010
TR-3-1
COVERS
3. REPLACEMENT AND ADJUSTMENT
3.1 COVERS
3.1.1 FRONT AND REAR COVER
Rear Cover
1. Loosen screws [C] ( x3)
1. Loosen screws [C] ( x3)
Front Cover
1. Open the Top Cover.
2. Remove screws [A] ( x3)
3. Loosen screws [B] ( x2)
1. Open the Top Cover.
2. Remove screws [A] ( x3)
3. Loosen screws [B] ( x2)
[B]
[A]
[C]
TR-3-2
20 October 2010
3.1.2 TOP COVER
COVERS
[A]
[B]
[B]
Removal
1. Pry off the Gas spring [A] using a screw driver.
2. Remove screws and nuts [B] ( x4, x4).
Replacement
1. Reverse the removal procedure.
Adjustment
1. Loosen screws and nuts [B] ( x4, x4).
2. Adjust Top cover so frame edge [C] is aligned with top of the hinge [D].
1. Pry off the Gas spring [A] using a screw driver.
2. Remove screws and nuts [B] ( x4, x4).
Replacement
1. Reverse the removal procedure.
Adjustment
1. Loosen screws and nuts [B] ( x4, x4).
2. Adjust Top cover so frame edge [C] is aligned with top of the hinge [D].
See drawings above.
3. Tighten screws and nuts [C] ( x4, x4).
Bad
Top cover too low
Bad
Top cover too high
Good
[D]
[C]
Click on the first or last page to see other MX-BMX1 (serv.man2) service manuals if exist.