Sharp MX-BMX1 (serv.man14) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
DOCKING THE PLOCKMATIC
i.
Make sure the copier is in normal copy mode and the Plockmatic is turned off.
ii.
Make a single staple 2 page copy, this will ensure that the exit tray is in the correct position.
iii.
Go into “System Settings” - “Device Control” - “Other Settings” Then scroll down to
“Booklet Maker Mode” and tick the box. Then touch “ok” on the box that appears.
“Booklet Maker Mode” and tick the box. Then touch “ok” on the box that appears.
Docking and Un-Docking Procedure For
Plockmatic
TECHNICAL BULLETIN
Date:
5
th
May 2010
Model:
MX-BMX1
Ref.:
1
Colour:
White
Page:
1 of 6
Sharp Electronics (UK) Ltd., Technical Services Group
iv.
Switch the MX-M850/950/1100 off using the power switch inside the front cover
v.
Hook up the finisher exit sensor
Sharp Electronics (UK) Ltd., Technical Services Group
vi.
Remove and store the finisher exit tray.
vii.
Move the Plockmatic up to the copier and “Dock It”.
viii.
Switch on the Plockmatic and wait until the unit comes to “Ready”.
Sharp Electronics (UK) Ltd., Technical Services Group
ix.
Switch the MX-M850/950/1100 on using the power switch inside the front cover.
x.
Make sure the Plockmatic is in “Auto” mode.
UN-DOCKING THE PLOCKMATIC
i.
Go into “System Settings” – “Device Control” – “Other Settings”.
Scroll down to “Booklet Maker Mode” mode and un-tick the box. Then touch “OK” on the
Scroll down to “Booklet Maker Mode” mode and un-tick the box. Then touch “OK” on the
screen that appears.
Display