MX-B201D (serv.man6). Service Manual MX-FX12 — Sharp Copying Equipment Service Manual (repair manual). Page 4

View Sharp MX-B201D (serv.man6) Service Manual online

MX-FX12  INSTALLATION PROCEDURE  1 - 3
NOTE: For installation of the rear cabinet, follow the procedures
shown in the figure below.
(7) Peel off the dummy key sheet.
Open the RSPF or OC.
Peel  the  edge  of  the  dummy  key  sheet  using  a  tool  such  as  a
retractable knife, and then peel off the entire key sheet.
(8) Remove the dummy keyboard.
Unscrew the screw, and remove the dummy keyboard with a tool
like a pillar as shown below. (Save the screw.)
(9) Attach the FAX keyboard.
1) Remove the tape which is fixing the harness to the operation
panel.
2) Connect the copier cable to the FAX keyboard. Note that the
cable should be folded as shown below and placed under the
keyboard.
3) Place  the  FAX  keyboard  and  secure  it  using  the  screw
removed earlier.
4) Affix the key sheet to the FAX keyboard.
(10) Paste the label on the rear cabinet of the copier.
Paste the FCC or A-Tick label on the position shown in the illustra-
tion.
This procedure is correspondence only in North America (FCC)
and Australia (A-Tick).
7
2
1
6
5
4
3
In order to manifest the compliance with FCC Part 68 and ICES-03.
it is required to provide the machine with the FCC Registration
Number (USA), Ringer Equivalence (USA) and Ringer Equivalence
(Canada).
After installing the FAX expansion kit in the machine, please put the
registration label, packed with the kit, on the prescribed location.
2
3
4
Putting standard
Putting
standard
FCC or A-Tick Label
FCC or A-Tick Label
Page of 56
Display

Click on the first or last page to see other MX-B201D (serv.man6) service manuals if exist.