Sharp MX-B201D (serv.man6) Service Manual ▷ View online
MX-FX12 FAX SOFT SWITCH 2 - 6
S
W
16
1
Inhibited to use
1
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
17
1
Inhibited to use
0
2
MH fixed (Except
for SG3)
for SG3)
Used to set whether coding capacity is fixed to MH or not in
communication other than SG3.
communication other than SG3.
No
0
1: Yes
0: No (depending on the other
party’s machine)
party’s machine)
3
ECM MMR mode
(Except for SG3)
(Except for SG3)
Used to set whether MMR coding capacity is allowed or not in
communication other than SG3.
communication other than SG3.
Yes
1
1: Yes
0: No
4
ECM JBIG mode
(Except for SG3)
(Except for SG3)
Used to set whether JBIG coding capacity is allowed or not in
communication other than SG3.
communication other than SG3.
Yes
1
1: Yes
0: No
5
Inhibited to use
0
6
MH fixed (in SG3) Used to set whether coding capacity is fixed to MH or not in SG3
communication.
No
0
1: Yes
0: No (depending on the other
party’s machine)
party’s machine)
7
ECM MMR mode
(in SG3)
(in SG3)
Used to set whether MMR coding capacity is allowed or not in SG3
communication.
communication.
Yes
1
1: Yes
0: No
8
ECM JBIG mode
(in SG3)
(in SG3)
Used to set whether JBIG coding capacity is allowed or not in SG3
communication.
communication.
Yes
1
1: Yes
0: No
S
W
18
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
19
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
Recording table
automatic print
automatic print
Used to set whether communication report is automatically
outputted or not when the number of send/receive items which have
not outputted yet on communication report reaches 50.
When set to 1, they are automatically outputted.
When set to 0, they are not outputted even the number of items
reaches 50.
outputted or not when the number of send/receive items which have
not outputted yet on communication report reaches 50.
When set to 1, they are automatically outputted.
When set to 0, they are not outputted even the number of items
reaches 50.
No
0
Refer to User program
“AUTO LISTING”.
“AUTO LISTING”.
1: Yes
0: No
7
Inhibited to use
0
8
0
S
W
20
1
Line sound
monitor range
monitor range
Used to set line sound monitor range when line sound monitor
function is used.
function is used.
OFF
0
When a value outside the
set range is set, the initial
value is set.
set range is set, the initial
value is set.
Bit No.
1
2
2
OFF
0
0
0
Up to NSF signal send/
receive
receive
0
1
All
1
0
3
Inhibited to use
0
4
0
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 7
S
W
20
5
Receivable
memory capacity
memory capacity
Used to set the remained memory capacity for allowing call-in.
128Kbyte
0
The machine doesn’t arrive when it decreases more than this
capacity.
capacity.
1: 64Kbyte
0: 128Kbyte
6
Inhibited to use
0
7
0
8
0
S
W
21
1
Interval between
completion of
communication
and the next call
completion of
communication
and the next call
Used to set the interval between completion of communication and
the next call.
the next call.
1sec.
0
2
0
3
Setting is made in binary input.
0
4
Binary input
0
5
Bit No.
1
2
3
4
5
6
7
8
0
6
Set range
0 to 255sec.
0
7
0
8
1
S
W
22
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
23
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
24
1
Inhibited to use
0
2
0
3
Specified number
reception (ANTI
JUNK FAX)
reception (ANTI
JUNK FAX)
Used to set whether the FAX receive rejection function is made
valid or not for registered FAX numbers.
valid or not for registered FAX numbers.
Not set.
0
Refer to Main menu “ANTI
JUNK FAX”.
When a value outside the
set range is set, the initial
value is set.
JUNK FAX”.
When a value outside the
set range is set, the initial
value is set.
4
Bit No.
3
4
0
Not set.
0
0
Receive inhibit
0
1
5
Inhibited to use
0
6
Document output
setup in reception
setup in reception
Used to set the document output procedure; whether all the
received documents are collectively outputted after completion of
reception or every page is outputted when it is received.
received documents are collectively outputted after completion of
reception or every page is outputted when it is received.
Output after
reception of
reception of
every page
0
1: Collective output after
completion of reception
completion of reception
0: Output after reception of
every page
every page
7
Inhibited to use
0
8
Automatic
reduction print
reduction print
Used to set whether automatic reduction print is performed or not
so that a document longer than the fixed size and smaller than the
automatic reduction line number setting is printed on fixed size
paper.
so that a document longer than the fixed size and smaller than the
automatic reduction line number setting is printed on fixed size
paper.
Allow
1
Refer to User program
“AUTO RCV REDUCE”.
“AUTO RCV REDUCE”.
1: Allow
0: Inhibit
S
W
25
1
Minimum non-
divide reduce rate
divide reduce rate
The non-divide minimum reduce rate [%] = 100 - (3 x N)
N: 0 - 15 (Default: 10)
N: 0 - 15 (Default: 10)
70% (N=10)
1
2
0
3
1
4
0
5
Inhibited to use
0
6
0
7
0
8
0
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 8
S
W
26
1
Read completion
sound
sound
Used to set whether buzzer sound is made or not when scan is
completed.
In manual send or when scan is completed in direct send, buzzer
sound is not made.
completed.
In manual send or when scan is completed in direct send, buzzer
sound is not made.
1sec.
0
1: Mute
0: 1sec.
2
Error beep of FAX
RX in case of the
sender fax is no
response
RX in case of the
sender fax is no
response
Setting of communication error beep when machine arrives as fax
reception, and fax signal is not received from sending side.
reception, and fax signal is not received from sending side.
Communication
error beep is
invalid
0
1: Communication error beep is
effective
effective
0: Communication error beep is
invalid
invalid
3
Speaker volume
setup
setup
Used to set speaker volume.
The following sounds are the targets of this setting.
• Alarm sound
The following sounds are the targets of this setting.
• Alarm sound
• Send end sound
• Receive end sound
• Scan end sound
Small
0
Refer to User program
“BEEPER VOLUME (send
completion sound / receive
completion sound / scan
completion sound / alarm
sound)”
“BEEPER VOLUME (send
completion sound / receive
completion sound / scan
completion sound / alarm
sound)”
4
Bit No.
3
4
1
Silent
0
0
Small
0
1
Medium
1
0
Large
1
1
5
Inhibited to use
0
6
0
7
0
8
0
S
W
27
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
Recording paper
tray selection
tray selection
Used to select the recording paper tray used by FAX.
Valid only when two cassettes are installed.
Valid only when two cassettes are installed.
AUTO
0
Refer to User program
“TRAY SELECTION”.
When a value outside the
set range is set, the initial
value is set.
“TRAY SELECTION”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
7
8
8
AUTO
0
0
0
TRAY1
0
1
TRAY2
1
0
S
W
28
1
Inhibited to use
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
S
W
29
1
Number of auto
switch calls of
manual reception
auto reception
switch calls of
manual reception
auto reception
Used to set the number of calls to switch to auto receive in manual
receive mode.
receive mode.
0 time
0 Refer to User program
“# OF RINGS MANUAL RX”.
When a value outside the
set range is set, the initial
value is set.
When a value outside the
set range is set, the initial
value is set.
2
0
When set to 0, switch to auto receive is not made.
3
Binary input
0
Bit No.
1
2
3
4
4
Set range
0 to 9
0
Not switched when 0.
5
Setup of number
of times of call
rings
of times of call
rings
Used to set the number of calls before starting reception in auto
receive mode.
receive mode.
2 times
0 Refer to User program
“# OF RINGS AUTO RX”.
When a value outside the
set range is set, the initial
value is set.
When a value outside the
set range is set, the initial
value is set.
6
0
7
Setting is made in binary input.
1
Binary input
8
Bit No.
5
6
7
8
0
Set range
0 to 9 times
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
MX-FX12 FAX SOFT SWITCH 2 - 9
S
W
30
1
Report output
when canceling
when canceling
Used to set whether the user cancel report is outputted or not when
send is canceled during document send.
send is canceled during document send.
Not output
0
1: Output
0: Not output
2
Inhibited to use
0
3
0
4
0
5
Default data,
sender print
sender print
Used to set whether sender information (registered in the sender
registration), sending date, and time are printed on the upper edge
of send document or not.
registration), sending date, and time are printed on the upper edge
of send document or not.
ON
1
1: ON
0: OFF
6
Report output
(in anti junk set.)
(in anti junk set.)
Use to whether the activity report is printed when anti-junk function
operates.
operates.
Print inhibited
0
1: Print
0: Print inhibited
7
Date/sender print
position setup
position setup
Used to set whether date/sender information is printed inside the
document area or outside the document area.
document area or outside the document area.
Outside of
document
0
1: Inside of document
0: Outside of document
8
Inhibited to use
0
S
W
31
1
Report output
(in transmission)
(in transmission)
Used to set whether communication report is outputted or not after
completion of sending (excluding sequential broadcast and
sequential send request).
completion of sending (excluding sequential broadcast and
sequential send request).
Only when
transmission is
failed.
1
Refer to User program
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
1
2
2
Print inhibited
0
0
0
All print
0
1
Only when transmission is
failed.
failed.
1
0
3
Report output
(In broadcast and
sequential send
request)
(In broadcast and
sequential send
request)
Used to set whether communication report is outputted or not after
completion of sending (sequential broadcast and sequential send
request).
completion of sending (sequential broadcast and sequential send
request).
All print
0
Refer to User program
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
3
4
4
Print inhibited
0
0
1
All print
0
1
Only the address to which
transmission is failed
transmission is failed
1
0
5
Report output
(in reception)
(in reception)
Used to set whether communication report is outputted or not in
reception.
reception.
Print inhibited
0
Refer to User program
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
5
6
6
Print inhibited
0
0
0
All print
0
1
Only in error
1
0
7
Contents of send
document are
printed in memory
send
document are
printed in memory
send
Used to set whether part of send document is printed on the
communication report or not in memory send.
communication report or not in memory send.
Only the address
to which
transmission is
failed
1
Refer to User program
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
“PRINT SELECTION”.
When a value outside the
set range is set, the initial
value is set.
Bit No.
7
8
8
Print inhibited
0
0
0
All print
0
1
Only the address to which
transmission is failed
transmission is failed
1
0
S
W
32
1
Distinctive ringing
(U.S.A., Canada,
Australia, New
Zealand)
(U.S.A., Canada,
Australia, New
Zealand)
Used to set the ringing pattern as FAX reception.
OFF
0
Refer to User program
“DISTINCTIVE RING”.
When a value outside the
set range is set, the initial
value is set.
*1: For U.S.A., Canada
“DISTINCTIVE RING”.
When a value outside the
set range is set, the initial
value is set.
*1: For U.S.A., Canada
only
Bit No.
1
2
3
4
2
OFF
0
0
0
0
0
Standard/ON
0
0
0
1
3
Pattern 1 *
1
1
0
0
0
0
Pattern 2 *
1
0
1
0
0
4
Pattern 3 *
1
1
1
0
0
0
Pattern 4 *
1
0
0
1
0
Pattern 5 *
1
1
0
1
0
5
Inhibited to use
0
6
Index print setup
Used to set whether the index is printed when outputting received
document or not.
document or not.
Not print
0
Refer to User program
“INDEX PRINT”.
“INDEX PRINT”.
1: Print
0: Not print
7
Inhibited to use
0
8
0
SW
NO.
Data
No.
Item
Switch selection and contents of functions
Initial value
Remark
Click on the first or last page to see other MX-B201D (serv.man6) service manuals if exist.