Sharp MX-6500N / MX-7500N (serv.man10) Service Manual ▷ View online
MX-7500N CONFIGURATION 1 – 3
3. Weight list
Weight of each model
*1: Excluding consumable parts.
Model name
Weight
Main unit
228.1kg
*1
MX-FN19
42kg
MX-FN20
72kg
MX-FN21
61kg
MX-FN22
108kg
MX-TM10
32kg
MX-FD10
66kg
MX-RB12
5.7kg
MX-RB13
14.5kg
MX-RB14
27.5kg
MX-RB15
16.4kg
MX-CF11
23kg
MX-LC12
28.5kg
MX-LC13
130.3kg
MX-MF11
21kg
MX-7500N MX-7500N/6500N (MAIN UNIT) 2 – 1
MX-7500N
Service Manual
[2] MX-7500N/6500N (MAIN UNIT)
1. Unpacking
A. Unpacking
Remove the machine from the palette with a forklift or a slope
(DKIT-0367FCZZ).
(DKIT-0367FCZZ).
NOTE: Carefully roll the main unit down the ramps in the direction
of the arrow.
of the arrow.
B. Removal of the fixing tape and protection
material
C. Packed items check
*1 For RB12 installation
No.
Name
Quantity
1
Waste toner bottle
1
2
Height adjuster plate
4
3
Panel arm
1
4
Arm cover A
1
5
Operation panel
1
6
Arm cover B
1
7
Upper arm cover B
1
8
Arm cover R
1
9
Upper arm cover
1
10
Screw cover
1
11
Lower arm cover F
1
12
Lower arm cover R
1
13
Upper front cover L *1
1
14
M4X8 S tight
11
15
M3X8
1
16
Step screw
1
17
Operation manual
1
MX-7500N MX-7500N/6500N (MAIN UNIT) 2 – 2
2. Installation
A. Machine height and tilt adjustments
1)
Put the height adjuster plate (Packed items) under the adjuster
bolt at the bottom of the machine.
Turn the adjuster bolt to adjust the height and the tilt of the
machine.
bolt at the bottom of the machine.
Turn the adjuster bolt to adjust the height and the tilt of the
machine.
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
NOTE: Lower the height of the MX-CF11 to the lowest position
before adjusts the level between the MX-CF11 and the
main body.
main body.
Adjust the height of the top surface of main body refer-
ence to the top surface of the MX-CF11.
ence to the top surface of the MX-CF11.
B. Lock release
(1)
Tray rotation plate lock release
1)
Pull out the tray1/2. Remove the screw, and remove the cau-
tion label.
Close the tray which was pulled out.
tion label.
Close the tray which was pulled out.
2)
Pull out the tray 3 and tray 4. Turn the fixing material and
remove it. Remove the caution label.
Attach the removed fixing material to the position shown in the
figure for future use.
Close the tray which was pulled out.
remove it. Remove the caution label.
Attach the removed fixing material to the position shown in the
figure for future use.
Close the tray which was pulled out.
Low
High
MX-7500N MX-7500N/6500N (MAIN UNIT) 2 – 3
(2)
Scanner (2/3 mirror unit) lock release
1)
Remove the optical unit fixing screw, and remove the note
label.
label.
C. Attach the operation panel
1)
Install the Panel arm (Packed item No.3) by fixing the screws
(2: Packed item No.16, 3: Packed item No.14).
(2: Packed item No.16, 3: Packed item No.14).
2)
Put the Arm cover A (Packed item No.4) temporarily as the fig-
ure below.
ure below.
3)
Install the Panel (Packed item No.5) by fixing the screws
(Packed item No.14).
(Packed item No.14).
4)
Arrange the wire and fix the screw as the figure below.
NOTE: Handle the connectors with care not to make damage
to the connector when connecting.
NOTE: Connect the connectors vertically to the PWB.
NOTE: When arranging the cable, never twist it.
NOTE: Handle the connectors with care not to make damage
to the connector by snagging them when wiring.
5)
Install the Arm cover B (Packed item No.6) by fixing the screws
(Packed item No.14).
(Packed item No.14).
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man10) service manuals if exist.