DOWNLOAD Sharp MX-6240N / MX-7040N (serv.man16) Service Manual ↓ Size: 45.15 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  MX-TR14 (EXIT TRAY UNIT)  10 – 2

4)

Remove the screws (6 pcs.).
(1) Step screw, (2) P tight, (3) S tight

5)

Remove the right paper exit section.

1)

Remove the screws (4 pcs.), and remove the right paper exit
PG upper.

NOTE: When removing, be careful of the pawls.

2)

Remove the screws (7 pcs.) and remove the right paper exit
unit dummy.

Ԙ

ԙ

Ԛ

Pawls

MX-7040N  MX-TR14 (EXIT TRAY UNIT)  10 – 3

1)

Fix the right paper exit unit with the screws (3 pcs.), and
arrange the wires.

2)

Fix the ADU right upper cabinets F/R with the screws (each 2
pcs.).

1)

Attach the right paper exit PG upper to the original positions.

2)

Attach the right paper exit section to the original positions.
Connect the harness.

3)

Attach the inner cover of the right door, the cabinet upper of
the right door and the front cabinet upper of the right door to
the original positions.

MX-7040N  MX-TU14 (EXIT TRAY CABINET)  11 – 1

MX-7040N

Service Manual

 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Fix the rear cover with the screws.

2)

Fix the front right cover with the screws.

Hook the front right cover.  

3)

Fix the exit tray cabinet to the machine with the screw (Packed
items).  

Fit the rib part to the hole of the rear cover.  .  

1)

Attach the front cover, and fix it with the E-ring.

1

Exit tray cabinet

1

2

Front cover

1

3

Paper holding arm

1

4

Full detection actuator

1

5

Screw

2

6

E-ring

1

7

Rear  cover

1

8

Front right cover

1

1

1

1

1

1

MX-7040N  MX-TU14 (EXIT TRAY CABINET)  11 – 2

1)

Attach the paper holding arm and the full detection actuator.