DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man75) Service Manual ↓ Size: 27.77 MB | Pages: 104 in PDF or view online for FREE

MX-7000N  MX-5500N/6200N/7000N  1 – 3

2)

Cut the four corners of the bottom case.

3)

Lift the main unit slightly, and remove the bottom pad R.

4)

Lift the main unit slightly, and remove the bottom pad L.

5)

Remove the vinyl bag from the main unit.

6)

Remove the slope.

* Slope : Deal as a parts.

7)

Attach the slope to the concave section of the skid.

Skid slope

DKiT– 0367FCZZ

MX-7000N  MX-5500N/6200N/7000N  1 – 4

8)

Hold the grips of main unit and pull them down in the arrow
direction.

1)

Remove the fixing tape and protection material.

1)

Pull out the bundled items.

1)

Check that all the items are included in the package.

1

Waste toner bottle

1

2

Paper exit tray

1

3

Paper exit full detection actuator

1

4

Operation manual pocket

1

5

Operation manual

1

1

2

3

4

5

MX-7000N  MX-5500N/6200N/7000N  1 – 5

1)

Remove the optical unit fixing screw and remove the note
label.

1)

Pull out the tray, and remove the rotation plate fixing material
and the tray note label.

(Tray 1, tray 2)

(Tray 3, tray 4)

2)

Attach the removed fixing material to the position shown in the
figure for storage.

1)

Release the lock, and open the right door.

2)

Lower the pressure release lever to apply more pressure.

NOTE: If the machine is left unused for one month or more, the

heat roller rubber may be deformed. In such a case,
release the pressure by pushing up both levers.

MX-7000N  MX-5500N/6200N/7000N  1 – 6

1)

Open the front cover.

2)

Check that the lock is released. 
When the lock is not released, turn the blue screw counter-
clockwise, and check that the lock is released as shown in (A).
* Failure to complete this step may damage the primary trans-

fer belt.

3)

Hold the drum fixing knob by the hand to not rotate, remove
the screw, and remove the drum fixing knob.

4)

Pull out the fixing cover.

5)

Loosen the screws, and open the cover of the process section.

6)

Release the fixing screw. (1position for each color)

7)

Pinch the knob and remove the development unit.

8)

Remove two fixing screws of the DV cover.

A