DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual ↓ Size: 5.46 MB | Pages: 20 in PDF or view online for FREE

MX-7000N  MX-5500N/6200N/7000N  1 – 10

13) Install the drum fixing knob so that fit to D-cutting part, and fix

with the screw.

14) Close the front cover.

1)

Open cover of the waste toner bottle section.

2)

Check that the waste toner bottle is installed securely.

3)

Close cover of the waste toner bottle section.

* The following procedure are the installation procedures of the

paper exit tray unit for North America and Australia, New
Zealand. Because it is standard equipment for another destina-
tion, the following procedure is unnecessary.

1)

Check that all the items are included in the Package.

1)

Remove the screw, and remove the switch cover.

1

Paper exit tray unit

1

2

Paper holding arm

1

3

Paper exit full detection actuator

1

4

IL interface harness

1

5

Screw (S tight M4x8)

4

1

2

3

4

5

MX-7000N  MX-5500N/6200N/7000N  1 – 11

2)

Install the IL interface harness (Package part No. 4).

3)

Install the switch cover and fix it with a screw.

1)

Remove the resin E ring, and remove the toner cover.
* Even if the toner cover remains being installed, the following

procedure is possible. However, remove it for the working
property.

2)

Install the paper exit tray (Package part No. 1) to the main unit,
and fix with the screws (Package part No. 5).

3)

Install the toner cover and fix it with a resin E ring.

1)

Install the paper holding arm (Package part No. 2), and install
the paper exit full detection actuator (Package part No. 3).
* Check the size of the diameter of place where paper holding

arm is installed.

6

4

MX-7000N  MX-5500N/6200N/7000N  1 – 12

1)

Insert the power plug into the power outlet.

2)

Open the front cabinet. Turn ON the power switch in the front
cabinet of the main unit.

3)

Turn ON the power switch on the operation panel.

4)

With the front cabinet open, enter the data for Sim.25-2.

5)

After the data input, close the cover.

6)

Select K, C, M, Y and then press the [EXECUTE] button. The
system then performs the simulation, samples the toner den-
sity control sensor value, and sets (stores in memory) the
average sensor detection level as the control level for the ref-
erence toner density.

Note: Be sure to select all of the four colors: K, C, M, Y

7)

Exit from Simulation mode by pressing the [CA] key on the
main unit.

M

Y

C

K

0

AUTOMATIC DEVELOPER ADJUSTMENT

EXECUTE

AT DEVE ADJ_L_K

128

:

AT DEVEVO_L_Y

128

:

1/1

SIMULATION NO.25-02

TEST

CLOSE

AT DEVE ADJ_M_K

128

:

AT DEVE VO_M_Y

128

:

AT DEVE ADJ_L_C

128

:

AT DEVE VO_M_K

128

:

AT DEVE ADJ_L_M

128

:

AT DEVE VO_M_C

128

:

AT DEVE ADJ_L_Y

128

:

AT DEVE VO_M_M

128

:

AT DEVE ADJ_M_C

128

:

AT DEVE VO_H_K

128

:

AT DEVE ADJ_M_M

128

:

AT DEVE ADJ_M_Y

128

:

AT DEVE ADJ_H_K

128

:

AT DEVEVO_L_K

128

:

AT DEVEVO_L_M

128

:

AT DEVEVO_L_C

128

:

M

Y

C

K

0

AUTOMATIC DEVELOPER ADJUSTMENT

EXECUTE

AT DEVE ADJ_L_K

128

:

AT DEVEVO_L_Y

128

:

1/1

SIMULATION NO.25-02

TEST

CLOSE

AT DEVE ADJ_M_K

128

:

AT DEVE VO_M_Y

128

:

AT DEVE ADJ_L_C

128

:

AT DEVE VO_M_K

128

:

AT DEVE ADJ_L_M

128

:

AT DEVE VO_M_C

128

:

AT DEVE ADJ_L_Y

128

:

AT DEVE VO_M_M

128

:

AT DEVE ADJ_M_C

128

:

AT DEVE VO_H_K

128

:

AT DEVE ADJ_M_M

128

:

AT DEVE ADJ_M_Y

128

:

AT DEVE ADJ_H_K

128

:

AT DEVEVO_L_K

128

:

AT DEVEVO_L_M

128

:

AT DEVEVO_L_C

128

:

MX-7000N  MX-5500N/6200N/7000N  1 – 13

1)

Shake the toner cartridge a few times.

2)

Open the toner cover.

3)

Insert the toner cartridge.

* Be sure to install the color cartridges to their proper posi-

tions. Avoid installation to a different color position.

* Do not forcibly insert the toner cartridge.

Keep holding the cartridge and completely insert it.

* When the machine is transported with the development unit

removed, be sure to remove the toner cartridge. (If not, tone
may be clogged.)

* Be sure to insert all of five toner cartridges (Y/M/C/BK1/

BK2).
[Color toner cartridge positions]

4)

Insert the cartridge securely until it locks.

5)

Close the toner cover.

1)

Install the paper exit tray (Package part No. 2) and the paper
exit full detection actuator (Package part No. 3) to the right
door.

1)

Install the operation manual pocket (Package part No. 4) to the
back side of the machine.

Y

M

C

BK1

BK2