DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual ↓ Size: 5.46 MB | Pages: 20 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man72)
Pages
20
Size
5.46 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual-Main Unit
File
mx-5500n-mx-6200n-mx-7000n-sm72.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual ▷ View online

MX-7000N  MX-5500N/6200N/7000N  1 – 8
14) Install each development unit.
15) Fix it with the fixing screw.
D. Infusing the developer (black)
1)
Loosen the fixing screw.
2)
Hold the knob and remove the development unit.
3)
Remove the screws, and remove the toner hopper unit.
4)
Disconnect the connectors on front side and rear side.
5)
While rotating the MG roller, infuse the developer.
MX-7000N  MX-5500N/6200N/7000N  1 – 9
6)
Connect the connectors on front side and rear side.
7)
Engage the pawls to the toner hopper unit, and install it, and fix
with the screws.
8)
Shake the development unit horizontally a few times.
9)
Install the development unit.
10) Fix with the fixing screw.
11) Close the cover of the process section.
12) Tighten the screws. Push the fixing cover.
MX-7000N  MX-5500N/6200N/7000N  1 – 10
13) Install the drum fixing knob so that fit to D-cutting part, and fix
with the screw.
14) Close the front cover.
E. Check of the waste toner bottle
1)
Open cover of the waste toner bottle section.
2)
Check that the waste toner bottle is installed securely.
3)
Close cover of the waste toner bottle section.
F. Installation of the paper exit tray
* The following procedure are the installation procedures of the
paper exit tray unit for North America and Australia, New
Zealand. Because it is standard equipment for another destina-
tion, the following procedure is unnecessary.
(1) Check the packed items
1)
Check that all the items are included in the Package.
(2) Installation of the IL interface harness
1)
Remove the screw, and remove the switch cover.
No.
Names of bundles
Quantity
1
Paper exit tray unit
1
2
Paper holding arm
1
3
Paper exit full detection actuator
1
4
IL interface harness
1
5
Screw (S tight M4x8)
4
1
2
3
4
5
MX-7000N  MX-5500N/6200N/7000N  1 – 11
2)
Install the IL interface harness (Package part No. 4).
3)
Install the switch cover and fix it with a screw.
(3) Installation of the paper exit tray
1)
Remove the resin E ring, and remove the toner cover.
* Even if the toner cover remains being installed, the following
procedure is possible. However, remove it for the working
property.
2)
Install the paper exit tray (Package part No. 1) to the main unit,
and fix with the screws (Package part No. 5).
3)
Install the toner cover and fix it with a resin E ring.
(4) Installation of the paper holding arm and paper 
exit full detection actuator
1)
Install the paper holding arm (Package part No. 2), and install
the paper exit full detection actuator (Package part No. 3).
* Check the size of the diameter of place where paper holding
arm is installed.
6
4
Page of 20
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man72) service manuals if exist.