DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual ↓ Size: 5.46 MB | Pages: 20 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man72)
Pages
20
Size
5.46 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Installation Manual-Main Unit
File
mx-5500n-mx-6200n-mx-7000n-sm72.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual ▷ View online

MX-7000N  MX-5500N/6200N/7000N  1 – 11
2)
Install the IL interface harness (Package part No. 4).
3)
Install the switch cover and fix it with a screw.
(3) Installation of the paper exit tray
1)
Remove the resin E ring, and remove the toner cover.
* Even if the toner cover remains being installed, the following
procedure is possible. However, remove it for the working
property.
2)
Install the paper exit tray (Package part No. 1) to the main unit,
and fix with the screws (Package part No. 5).
3)
Install the toner cover and fix it with a resin E ring.
(4) Installation of the paper holding arm and paper 
exit full detection actuator
1)
Install the paper holding arm (Package part No. 2), and install
the paper exit full detection actuator (Package part No. 3).
* Check the size of the diameter of place where paper holding
arm is installed.
6
4
MX-7000N  MX-5500N/6200N/7000N  1 – 12
G. Set the control level for the reference toner 
density
1)
Insert the power plug into the power outlet.
2)
Open the front cabinet. Turn ON the power switch in the front
cabinet of the main unit.
3)
Turn ON the power switch on the operation panel.
4)
With the front cabinet open, enter the data for Sim.25-2.
5)
After the data input, close the cover.
6)
Select K, C, M, Y and then press the [EXECUTE] button. The
system then performs the simulation, samples the toner den-
sity control sensor value, and sets (stores in memory) the
average sensor detection level as the control level for the ref-
erence toner density.
Note: Be sure to select all of the four colors: K, C, M, Y
7)
Exit from Simulation mode by pressing the [CA] key on the
main unit.
"ON"
ON
ON
M
Y
C
K
0
AUTOMATIC DEVELOPER ADJUSTMENT
EXECUTE
AT DEVE ADJ_L_K
128
:
AT DEVEVO_L_Y
128
:
1/1
SIMULATION NO.25-02
TEST
CLOSE
AT DEVE ADJ_M_K
128
:
AT DEVE VO_M_Y
128
:
AT DEVE ADJ_L_C
128
:
AT DEVE VO_M_K
128
:
AT DEVE ADJ_L_M
128
:
AT DEVE VO_M_C
128
:
AT DEVE ADJ_L_Y
128
:
AT DEVE VO_M_M
128
:
AT DEVE ADJ_M_C
128
:
AT DEVE VO_H_K
128
:
AT DEVE ADJ_M_M
128
:
AT DEVE ADJ_M_Y
128
:
AT DEVE ADJ_H_K
128
:
AT DEVEVO_L_K
128
:
AT DEVEVO_L_M
128
:
AT DEVEVO_L_C
128
:
M
Y
C
K
0
AUTOMATIC DEVELOPER ADJUSTMENT
EXECUTE
AT DEVE ADJ_L_K
128
:
AT DEVEVO_L_Y
128
:
1/1
SIMULATION NO.25-02
TEST
CLOSE
AT DEVE ADJ_M_K
128
:
AT DEVE VO_M_Y
128
:
AT DEVE ADJ_L_C
128
:
AT DEVE VO_M_K
128
:
AT DEVE ADJ_L_M
128
:
AT DEVE VO_M_C
128
:
AT DEVE ADJ_L_Y
128
:
AT DEVE VO_M_M
128
:
AT DEVE ADJ_M_C
128
:
AT DEVE VO_H_K
128
:
AT DEVE ADJ_M_M
128
:
AT DEVE ADJ_M_Y
128
:
AT DEVE ADJ_H_K
128
:
AT DEVEVO_L_K
128
:
AT DEVEVO_L_M
128
:
AT DEVEVO_L_C
128
:
MX-7000N  MX-5500N/6200N/7000N  1 – 13
H. Installation of individual color toner cartridges
1)
Shake the toner cartridge a few times.
2)
Open the toner cover.
3)
Insert the toner cartridge.
* Be sure to install the color cartridges to their proper posi-
tions. Avoid installation to a different color position.
* Do not forcibly insert the toner cartridge.
Keep holding the cartridge and completely insert it.
* When the machine is transported with the development unit
removed, be sure to remove the toner cartridge. (If not, tone
may be clogged.)
* Be sure to insert all of five toner cartridges (Y/M/C/BK1/
BK2).
[Color toner cartridge positions]
4)
Insert the cartridge securely until it locks.
5)
Close the toner cover.
I. Installation of the paper exit tray and the paper 
full detection actuator
1)
Install the paper exit tray (Package part No. 2) and the paper
exit full detection actuator (Package part No. 3) to the right
door.
J. Installation of the operation manual pocket
1)
Install the operation manual pocket (Package part No. 4) to the
back side of the machine.
Y
M
C
BK1
BK2
1
1
2
MX-7000N  MX-5500N/6200N/7000N  1 – 14
K. Tray setup
(1) Setting of paper size and paper type
Change the tray setting in the "system setting" mode. Some items
require the administrator authority for display. The paper setting (to
A4/recycle) procedure for tray 3 is as follows.
However, if size of the tray 1 has been switched to B5, execute SIM
26-2, and set the paper size.
1)
Press the [SYSTEM SETTINGS] key.
2)
Touch the [Paper Tray Settings] key.
3)
Touch the [Tray Settings] key.
4)
Touch the [Change] key.
5)
Select "recycled" on the selection box of the "Type". Select
"A4" on the selection box of the "Size". Touch the [OK] key.
(2) Tray size setup
a. Inch series tray 1, tray 2 (LT to A4)
1)
Pull out the tandem cassette.
2)
Push down the paper feed base plate gently, hold the hooks
and remove A4 size regulation plate.
LOGOUT
LINE
PRINT
IMAGE SEND
DATA
DATA
READY
SYSTEM
SETTINGS
HOME
JOB STATUS
System Settings
Admin Password
Back
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
System Settings
Paper Tray Settings
Back
Tray Settings
Paper Type Registration
Auto Tray Switching
Back
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
Auto-Inch
Tray Settings
Size
Tray 3
Doc. Filing
I-Fax
Fax
Print
Copy
Change
Disable Punch
Disable Staple
Disable Duplex
Fixed Paper Side
Type
Plain
Auto-Inch
Size
Tray 4
Doc. Filing
I-Fax
Fax
Print
Copy
2
3
OK
Cancel
System Settings
Tray Settings
Tray:
Type:
Size:
mm (148-432)
mm (100-297)
X
Y
Paper Property:
Tray 3
Recycle Paper
Auto-Inch
Fixed Paper Side
Disable Duplex
Disable Staple
1
2
1
1
3
3
3
3
2
2
Page of 20
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man72) service manuals if exist.