Sharp MX-5500N / MX-6200N / MX-7000N (serv.man70) Service Manual ▷ View online
MX-7000N FAN, FILTER SECTION S – 6
4)
Remove the screws (H), and remove the inner ventilation fan
motor (Center) (I).
* When installing, direct the label face (J) to the mounting
motor (Center) (I).
* When installing, direct the label face (J) to the mounting
plate side, and position the harness (L) in mark (K) side.
(8) Inner ventilation fan motor (right)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Disconnect the connector (C), and remove the snap band (D).
4)
Close the control box (E).
5)
Remove the screw (F), and push the part (G), disengage the
pawl (H). Disengage the pawl (I), and remove the inner ventila-
tion fan motor (Right) unit (J).
pawl (H). Disengage the pawl (I), and remove the inner ventila-
tion fan motor (Right) unit (J).
Parts
i
Inner ventilation fan motor (right)
K
H
H
I
h
J
L
i
B
A
A
C
D
E
G
F
H
J
I
MX-7000N FAN, FILTER SECTION S – 7
6)
Remove the screws (K), and remove the inner ventilation fan
motor (Right) (L).
motor (Right) (L).
B. Filter
(1) Ozone filter
1)
Remove the filter cover (A), and remove the ozone filters (B).
(2) Ozone filter
1)
Remove the rear cabinet and rear lower cabinet. (Refer to the
"[A] EXTERNAL OUTFIT".)
"[A] EXTERNAL OUTFIT".)
2)
Remove the screws (A). Pull out the cover (B), and remove the
ozone filter (C).
ozone filter (C).
Parts
Mainte
nance
Page
a
Ozone filter
✕
▲
S - 7
b
Ozone filter
✕
▲
S - 7
c
Dust filter
✕
▲
S - 8
d
Paper exit filter
✕
▲
S - 8
Parts
Mainte
nance
a
Ozone filter
✕
▲
L
K
i
a
c
d
b
a
Parts
Mainte
nance
b
Ozone filter
✕
▲
A
B
B
a
a
b
A
A
B
b
C
MX-7000N FAN, FILTER SECTION S – 8
(3) Dust filter
1)
Release the lock (A), and open the right door unit (B).
2)
Remove the holder (C). Remove the dust filter (D).
(4) Paper exit filter
1)
Disengage the pawl (A), and remove the filter cover (B).
Remove the paper exit filter (C).
Remove the paper exit filter (C).
Parts
Mainte
nance
c
Dust filter
✕
▲
c
A
B
c
D
C
Parts
Mainte
nance
d
Paper exit filter
✕
▲
d
C
d
A
B
MX-7000N FAN, FILTER SECTION S – 9
2. Maintenance
✕
: Check { : Clean ▲ : Replace U : Adjust ✩ : Lubricate : Shift the position
(Clean, replace, or adjust according to necessity.)
No.
Part name
Monochrome
supply,
Mechanical
parts
When
calling
300
K
600
K
900
K
1200
K
1500
K
1800
K
2100
K
2400
K
2700
K
3000
K
Remark/Refer to
the Parts Guide.
Block/Item No.
(Only the
replacement
parts are
described.)
1
Ozone filter
Mechanical
parts
✕
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
(P/G No. : [65]-22)
(P/G No. : [65]-24)
(P/G No. : [65]-24)
2
Paper exit filter
✕
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
(P/G No. : [55]-50)
3
Dust filter
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
1
1
3
2
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man70) service manuals if exist.