Sharp MX-5500N / MX-6200N / MX-7000N (serv.man6) Handy Guide ▷ View online
9
22-04-2008
Consumables
Life (Approx.)
Product
Description / Contents
MX5500N
MX6200N
MX7000N
MX6200N
MX7000N
Fuser Section
MX-700UH
Upper Heat Roller Kit:-
•
Upper Heat Roller.
•
Fuser Gear.
•
Upper Fuser Bearing x2
200k
MX-700UR
Upper Thermistor Kit:-
•
Upper Separation Pawl x6
•
Upper Thermistor (main)
•
Upper Thermistor (sub)
MX-700LH
Lower Heat Roller Kit:-
•
Pressure Roller.
•
Lower Thermistor.
•
Lower Separation Pawl x 4
•
Separation Pawl Spring x 4
MX-700EF
External Heating Kit:-
•
Complete Unit
300k
MX-700WC
Web Cleaning Kit:-
•
Web unit.
200k
Transfer Section
MX-700B1
Primary Transfer Belt Kit:-
•
Transfer Belt.
•
Primary Transfer Blade.
•
PS Dust Remover
•
Charge Wire PTC
•
Charger Cleaner
•
Charger Cleaner B
MX-700X1
Primary Transfer Roller Kit:-
•
Transfer roller x4.
•
Belt drive gear.
MX-270B2
Secondary Transfer Belt Kit:-
•
Transfer belt only.
MX-700X2
Secondary Transfer Roller Kit:-
•
Transfer roller.
•
Drive idle gear.
300k
Service Rotation Unit
MX-700U1
Primary Transfer Belt Unit
MX-700U2
Secondary Transfer Belt Unit
MX-700FU
Fusing Unit (230v)
10
22-04-2008
Initial Set-up
DEVELOPER INSTALLATION
Sim 25-02
Auto Developer Adjustment
Select CMYK
Select CMYK
Note: Toner Installation should be performed
after Auto Developer Adjustment is completed
after Auto Developer Adjustment is completed
INITIAL SETTINGS
Sim 26-02
LCC Paper Size Set-up
Sim 26-06
MachineDestination
Sim 26-35
Set Multi Error Counter Set to 1 (Multi Count)
Sim 26-65
Finisher Alarm mode
Select Staple sheet limit (30 or 50)
Select Staple sheet limit (30 or 50)
Staple copies/sets limit (ON/OFF)
Sim 26-67
Summer Time/Internet Time Syncronization
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:- System Settings – Tray Settings
IMAGE WRITING DISTORTION – CMYK
Sim 61-04
Image Writing Adjustment
Select Paper A3
Select Paper A3
PRINT IMAGE MAGNIFICATION & OFF CENTRE
Manual Adjustment:
Sim 50-10
Adjust BK MAG to 240mm
Image Off Centre Adjustment
(All cassettes & ADU).
Image Off Centre Adjustment
(All cassettes & ADU).
Automatic Adjustment:
Sim 50-28
BK MAG ADJUST (Magnification)
SETUP/PRINT ADJ (Offset)
SETUP/PRINT ADJ (Offset)
11
22-04-2008
Initial Set-up
DRUM POSITION (PHASE) & COLOUR REGISTRATION
Sim 50-22
Drum Pos Adjustment
Registration Adjustment
Registration Adjustment
Select ALL
Note: Manual Colour Registration (Sim 50-20/21) &
Drum Position (Sim 44-31) adjustment s can also
be performed if required.
Drum Position (Sim 44-31) adjustment s can also
be performed if required.
COPY MAGNIFICATION
Sim 48-01
Magnification Adjustment
(Main & Sub Scan including RSPF)
(Main & Sub Scan including RSPF)
COPY IMAGE POSITION & VOID
Manual Adjustment:
Sim 50-01
Lead/Rear Edge, Image Loss &
Void Adjustment
.
Sim 50-06
DSPF Lead/Rear Edge Adjust.
Sim 50-12
OC & SPF Off Centre Adjust.
Automatic Adjustment:
Sim 50-28
OC ADJUST (Platen)
SPF ADJUST
SPF ADJUST
PRINTER LEAD EDGE IMAGE POSITION
Sim 50-05
Printer Lead Edge Adjust
(Sub Scan)
(Sub Scan)
HALF-TONE – COLOUR CALIBRATION
Engine:
Sim 46-24
Automatic Colour Calibration
Printer:
Sim 67-24
Printer Colour Calibration
Please refer to Page 12 for Calibration Procedure.
Note: Printer Calibration must be executed
everytime Engine Calibration is performed.
everytime Engine Calibration is performed.
12
22-04-2008
Initial Set-up
IMAGE DENSITY
Sim 46-01
Copy Density Adjust (Colour)
Sim 46-02
Copy Density Adjust (B/W)
Sim 46-04
Scanner Density Adjust (Colour)
Sim 46-05
Scanner Density Adjust (Mono)
PERIPHERALS
Sim 03-10
Saddle/Staple position adjust (ARFNX2 only)
Sim 53-06
DSPF Original Tray Adjustment.
Sim 53-08
DSPF
Document Scan Position
FAX OPTION (AR-FXX1)
Sim 66-02
Fax SW Setting (Destination)
Sim 66-39
Fax Destination Set
Sim 66-10
Fax Memory Clear (For Standard Extended Memory)
OTHER
Sim 22-06
Print All Simulation Data
Custom Settings
Adjust Clock (Set Time & Date)
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man6) service manuals if exist.