Sharp MX-5500N / MX-6200N / MX-7000N (serv.man52) Service Manual ▷ View online
MX-7000N PAPER TRANSPORT SECTION G – 8
4)
Remove the screw (A), and remove the tandem tray 1 trans-
port detector 1 (B). Disconnect the connector (C).
port detector 1 (B). Disconnect the connector (C).
d. Tandem tray 1 transport detector 2
1)
Romove the front cabinet, the right lower door, and the right
lower door cover. (Refer to the "[A] EXTERNAL OUTFIT".)
lower door cover. (Refer to the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem paper feed tray unit. (Refer to the "[F]
TRAY PAPER FEED SECTION".)
TRAY PAPER FEED SECTION".)
3)
Remove the paper pass unit. (Refer to the "(1) Paper pass
unit".)
unit".)
4)
Remove the screws (A), and remove the support plate (B).
5)
Remove the screw (C), and remove the tandem tray 1 trans-
port detector 2 (D). Disconnect the connector (E).
port detector 2 (D). Disconnect the connector (E).
B. Vertical transport unit
(1) Vertical transport unit
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
2)
Remove the waste toner bottle. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the resin E-ring (A), and remove the right vertical
transport unit (B).
transport unit (B).
Unit
Parts
1
Paper pass unit
d
Tandem tray 1 transport detector 2
A
B
C
1-c
1-d
A
A
B
D
C
E
1-d
Unit
Parts
Mainte
nance
Page
1
Vertical
transport unit
transport unit
a
Transport roller 5 (Drive)
✕
{
G - 9
b
Transport roller 6 (Drive)
✕
{
G - 9
c
Tandem tray 2 transport
detector
detector
–
G -10
d
Right door open/close
detection sensor
detection sensor
–
G -11
Unit
1
Vertical transport unit
1-b
1-a
1-c
1
1-d
1
A
B
MX-7000N PAPER TRANSPORT SECTION G – 9
4)
Release the lock (C), and open the right door unit (D).
5)
Disconnect the connectors (E), and remove the screws (F),
and remove the vertical transport unit (G).
and remove the vertical transport unit (G).
a. Transport roller 5 (Drive)
1)
Remove the right lower door, the right cabinet lower, and the
right door cover. (Refer to the “[A] EXTERNAL OUTFIT”.)
right door cover. (Refer to the “[A] EXTERNAL OUTFIT”.)
2)
Remove the waste toner box. ([J] PHOTOCONDUCTOR SEC-
TION”.)
TION”.)
3)
Remove the vertical transport unit. (Refer to the "(1) Vertical
transport unit".)
transport unit".)
4)
Remove the E-ring (A), the gear (B), the parallel pin (C), and
the gear collar (D). Remove the E-rings (E), and remove the
bearing (F).
the gear collar (D). Remove the E-rings (E), and remove the
bearing (F).
5)
Remove the screw (G), and remove the earth plate (H).
Remove the E-ring (I), and remove the bearing (J). Remove
the transport roller 5 (Drive) (K).
Remove the E-ring (I), and remove the bearing (J). Remove
the transport roller 5 (Drive) (K).
b. Transport roller 6 (Drive)
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the vertical transport unit. (Refer to the "(1) Vertical
transport unit".)
transport unit".)
Unit
Parts
Mainte
nance
1
Vertical transport unit
a
Transport roller 5 (Drive)
✕
{
C
D
E
E
F
F
G
1
1-a
Unit
Parts
Mainte
nance
1
Vertical transport unit
b
Transport roller 6 (Drive)
✕
{
A
B
C
D
E
F
G
H
I
J
K
1-a
1-b
MX-7000N PAPER TRANSPORT SECTION G – 10
4)
Remove the screws (A), and remove the support plate (B).
5)
Remove the E-ring (C), the gear (D), the parallel pin (E), and
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
the gear collar (F). Remove the E-rings (G), and remove the
bearing (H).
6)
Remove the screw (I), and remove the earth plate (J). Remove
the E-ring (K), and remove the bearing (L). Remove the trans-
port roller 6 (Drive) (M).
the E-ring (K), and remove the bearing (L). Remove the trans-
port roller 6 (Drive) (M).
c. Tandem tray 2 transport detector
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
right lower door cover. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the vertical transport unit. (Refer to the "(1) Vertical
transport unit".)
transport unit".)
4)
Remove the screws (A), and remove the support plate (B).
5)
Disconnect the connector (C). Remove the screw (D), and
remove the tandem tray 2 transport detector (E).
remove the tandem tray 2 transport detector (E).
A
A
B
C
D
E
F
G
H
I
J
K L
M
1-b
Unit
Parts
1
Vertical transport unit
c
Tandem tray 2 transport detector
1-c
A
A
B
C
D
E
1-c
MX-7000N PAPER TRANSPORT SECTION G – 11
d. Right lower door open/close detection sensor
1)
Remove the right lower door, the right cabinet lower, the right
door cover. (Refer to the “[A] EXTERNAL OUTFIT”.)
door cover. (Refer to the “[A] EXTERNAL OUTFIT”.)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the vertical transport unit. (Refer to the "(1) Vertical
transport unit".)
transport unit".)
4)
Remove the right lower door open/close detection sensor (A).
C. LCC transport unit
(1) LCC transport unit
1)
Remove the right lower door, the right cabinet lower, and the
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
LCC lower cabinet. (Refer to the "[A] EXTERNAL OUTFIT".)
2)
Release the lock (A), and open the right door unit (B).
Unit
Parts
1
Vertical transport unit
d
Right lower door open/close detection
sensor
sensor
1-c
A
1-d
Unit
Parts
Mainte
nance
Page
1
LCC
transport unit
transport unit
a
Transport roller 14 (Drive)
✕
{
G -12
b
Transport roller 15 (Drive)
✕
{
G -12
c
LCC paper entry detection
sensor
sensor
–
G -13
Unit
1
LCC transport unit
1-a
1-b
1-c
1
1
A
B
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man52) service manuals if exist.