DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man51) Service Manual ↓ Size: 933.37 KB | Pages: 9 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man51)
Pages
9
Size
933.37 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Others
File
mx-5500n-mx-6200n-mx-7000n-sm51.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man51) Service Manual ▷ View online

MX-7000N  OTHERS  12 – 5
(2) SCU JAM cause
PPD2_N3
PPD2 not-reached JAM (Desk 1 feed paper)
PPD2_N4
PPD2 not-reached JAM (Desk 2 feed paper)
PPD2_NM
PPD2 not-reached JAM (Manual feed tray feed 
paper)
PPD2_NL
PPD2 not-reached JAM (Side LCC feed paper)
PPD2_NA
PPD2 not-reached JAM (ADU refeed paper)
PPD2_S1
PPD2 remaining JAM (Cassette 1 feed paper)
PPD2_S2
PPD2 remaining JAM (Cassette 2 feed paper)
PPD2_S3
PPD2 remaining JAM (Desk 1 feed paper)
PPD2_S4
PPD2 remaining JAM (Desk 2 feed paper)
PPD2_SM
PPD2 remaining JAM (Manual feed tray feed paper)
PPD2_SL
PPD2 remaining JAM (Side LCC feed paper)
PPD2_SA
PPD2 remaining JAM (ADU refeed paper)
PPD2_PRI
PPD2 JAM (Image preparation wait timeout)
POD1_N
POD1 not-reached JAM
POD1_S
POD1 remaining JAM
POD2_N
POD2 not-reached JAM
POD2_S
POD2 remaining JAM
POD3_N
POD3 not-reached JAM
POD3_S
POD3 remaining JAM
APPD1_N
APPD1 not-reached JAM 
APPD1_S
APPD1 remaining JAM
APPD2_N
APPD2 not-reached JAM
APPD2_S
APPD2 remaining JAM
TRAY3
Cassette 3 paper feed JAM (C3PFD not-reached 
JAM) 
DPFD1_N4
DPFD1 not-reached JAM (Desk 2 feed paper)
DPFD1_S3
DPFD1 remaining JAM (Desk 1 feed paper)
DPFD1_S4
DPFD1 remaining JAM (Desk 2 feed paper)
TRAY4
Cassette 4 paper feed JAM (C4PFD not-reached 
JAM) 
DPFD2_S4
DPFD2 remaining JAM (Desk 2 feed paper)
MFT
Manual feed tray paper feed JAM (MPFD not-
reached)
MPFD_S
MPFD remaining JAM (Manual feed tray feed paper)
LCC
Side LCC paper feed JAM (LPFD1 not-reached)
LPFD_SL
LPFD remaining JAM (Side LCC feed paper)
SIZE_ILG
Size illegal JAM
MTR_ILG
Motor driver trouble JAM 
FJPID_N
Interface transport inlet sensor not-reached JAM
FJPID_S
Interface transport inlet sensor remaining JAM
FJPOD_N
Interface transport outlet sensor not-reached JAM
FJPOD_S
Interface transport outlet sensor remaining JAM
FED_N
Finisher inlet sensor not-reached JAM
FED_S
Finisher inlet sensor remaining JAM
FFPD_N
Finisher saddle not-reached JAM
FFPD_S
Finisher saddle remaining JAM
FEXIT_S
Finisher bundle exit remaining JAM
FSTPL
Staple JAM
FPNCH
Punch JAM
FDOP
Finisher door open
FIN_TIME
Finisher paper clearance abnormality JAM
TREG_SEN_N
Inserter tab sheet resist sensor not-reached JAM
TREG_SEN_S
Inserter tab sheet resist sensor remaining JAM
THI_SEN_N
Inserter tab sheet paper exit sensor not-reached JAM
THI_SEN_S
Inserter tab sheet paper exit sensor remaining JAM
REG_SEN_N
Inserter resist sensor not-reached JAM
REG_SEN_S
Inserter resist sensor remaining JAM
TIM_SEN_N
Inserter timing sensor not-reached JAM
TIM_SEN_S
Inserter timing sensor remaining JAM
HI_SEN_NI
Inserter paper exit sensor not-reached JAM (when 
feeding with the inserter)
HI_SEN_NP
Inserter paper exit sensor not-reached JAM (when 
feeding with the main unit)
HI_SEN_S
Inserter paper exit sensor remaining JAM
H_SEN_NF
Inserter reverse sensor not-reached JAM (when 
entering the reverse path)
H_SEN_NB
Inserter reverse sensor not-reached JAM (when 
discharging from the reverse path)
H_SEN_SF
Inserter reverse sensor remaining JAM (when 
entering the reverse path)
Code
Code content
H_SEN_SB
Inserter reverse sensor remaining JAM (when 
discharging from the reverse path)
TBH_SEN_NF
Inserter tab sheet reverse sensor not-reached JAM 
(when entering the reverse path)
TBH_SEN_NB
Inserter tab paper sheet reverse sensor not-reached 
JAM (when discharging from the reverse path)
TBH_SEN_SF
Inserter tab sheet reverse sensor not-reached JAM 
(when entering the reverse path)
TBH_SEN_SB
Inserter tab sheet reverse sensor not-reached JAM 
(when discharging from the reverse path)
FHS_N
Finisher paper exit not-reached JAM
FHS_S
Finisher paper exit remaining JAM
FSFS_N
Finisher saddle transport not-reached JAM
FSFS_S
Finisher saddle transport remaining JAM
FSHS_N
Finisher saddle paper exit not-reached JAM
FSHS_S
Finisher saddle paper exit remaining JAM
INS_EJCT
Inserter not-delivered JAM
T1PPD1_S1
T1PPD1 remaining JAM (Tray 1 paper feed paper)
T1PPD2_N1
T1PPD2 not-reached JAM (Tray 1 paper feed paper)
T1PPD2_S1
T1 PPD2 remaining JAM (Tray 1 paper feed paper)
T2PPD_N3
T2PPD not-reached JAM (Cassette 3 paper feed 
paper)
T2PPD_N4
T2PPD not-reached JAM (Cassette 4 paper feed 
paper)
T2PPD_S2
T2PPD2 remaining JAM (Tray 2 paper feed paper)
T2PPD_S3
T2PPD remaining JAM (Cassette 3 paper feed 
paper)
T2PPD_S4
T2PPD remaining JAM (Cassette 4 paper feed 
paper)
C3PFD_N4
C3PFD not-reached JAM (Cassette 4 paper feed 
paper)
C3PFD_S3
C3PFD remaining JAM (Cassette 3 paper feed 
paper)
C3PFD_S4
C3PFD remaining JAM (Cassette 4 paper feed 
paper)
C4PFD_S4
C4PFD remaining JAM (Cassette 4 paper feed 
paper)
LPPD_NL
LPPD not-reached JAM (Side LCC paper feed paper)
LPPD_SL
LPPD remaining JAM (Side LCC paper feed paper)
Code
Code content
NO_JAM_CAUSE
No JAM. Also used for JAM canceling.
NO_MATCH
Parameter no matching
STOP_JAM
Emergency stop JAM (Controller request)
SPPD1_N
SPPD1 not-reached JAM 
SPPD1_S
SPPD1 remaining JAM 
SPPD2_N
SPPD2 not-reached JAM
SPPD2_S
SPPD2 remaining JAM
SPPD3_N
SPPD3 not-reached JAM
SPPD3_S
SPPD3 remaining JAM
SPPD4_N
SPPD4 not-reached JAM
SPPD4_S
SPPD4 remaining JAM
SPPD5_N
SPPD5 not-reached JAM
SPPD5_S
SPPD5 remaining JAM
SPOD_N
SPOD not-reached JAM
SPOD_S
SPOD remaining JAM
SPRDMD_S
SPRDMD remaining JAM
SPSD_SCN
Exposure start notification wait timeout
SPPD2_NR
SPPD2 reverse not-reached JAM
SPPD2_SR
SPPD2 reverse remaining JAM
ICU_REQ
ICU factor stop JAM
Code
Code content
MX-7000N  OTHERS  12 – 6
3. Hidden Page for Serviceman Only
A. Outline
The Hidden Page for Serviceman Only is the web page used for a
serviceman to backup user data and system setup data of the
machine.
The backup data can be imported to another machine, and a profile
and fonts can be added from the web page.
B. Operating procedure
1)
Boot the browser.
2)
Enter "***.***.*** (IP address)/service_login.html" to the
address column of the browser, and press ENTER key.
3)
Enter the password, and log in.
Password: service
* The password can be changed optionally.
1)
Select "Password Setting" on the menu bar.
2)
Enter a new password.
3)
Enter the new password again on the reconfirmation column.
4)
Press [Submit] button.
2)
1)
3)
2)
3)
4)
1)
MX-7000N  OTHERS  12 – 7
(1) Font/Form Download
a. Font Download
1)
Select "Font/Form Download" on the menu bar.
2)
Select "Resource Type" in the pull-down menu.
(Example: Font/Form of PCL/PostScript, macro, etc.)
3)
Click [Browse] button and select font files.
4)
Click [Download] button, and the selected fonts are down-
loaded to the HDD.
5)
The list of the downloaded fonts and the use rate (%) of the
HDD are displayed.
b. Deleting downloaded fonts
1)
Select fonts to be deleted from the lists of the downloaded
fonts, and click [Delete] button.
2)
The confirmation message is displayed. Press [YES] key, and
the selected fonts are deleted.
3)
To initialize all the resources, press the initial button.
4)
The confirmation message is displayed. Press [YES] key, and
all the downloaded files are deleted.
(2) Output Profile Settings
1)
Select "Output Profile Settings" on the menu bar.
2)
Click [Browse] button and select an output profile.
3)
Click [Add] button to add an output profile.
4)
The added profile is displayed on the list, and the newly added
file becomes the default.
(If no file is added, the file registered when shipping serves as
the default.)
**Reference**
1. The difference between the output A profile and the output B 
profile is:
Output profile A: Photo/CAD
Output profile B: Standard/Graphic
2. When the PS option is installed, the output C profile/Pantone 
table setting can be made. (The setting procedure is the same.)
2)
3)
4)
5)
1)
2)
4)
3)
1)
MX-7000N  OTHERS  12 – 8
(3) Device Cloning
a. Backup
1)
Select "Device Cloning" on the menu bar.
2)
Select an item to be backed up.
3)
Press [Execute] button to execute backup.
(File name: *****.bin)
b. Import
1)
Select "Device Cloning" on the menu bar.
2)
Import from a file: Click [Browse] button and select a backup
file (file name: *****.bin).
3)
Press [Execute] button to execute importing.
(4) Filing Data Backup
a. Backup
1)
Select "Filing Data Backup" on the menu bar.
2)
Select one of the radio buttons of the storage space for a file to
be exported.
(Main Folder/Quick File Folder/Custom Folder)
3)
The index/number of display can be changed with the pull-
down menu to specify the retrieval condition.
4)
Press [Execute] button to execute backup. 
(File name: *****.bin)
b. Import
1)
Select "Filing Data Backup" on the menu bar.
2)
Import from a file: Click [Browse] button and select a backup
file (File name: *****.bin).
3)
Press [Execute] button to execute importing.
2)
3)
4)
1)
Page of 9
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man51) service manuals if exist.