Sharp MX-5500N / MX-6200N / MX-7000N (serv.man48) Service Manual ▷ View online
MX-7000N MAINTENANCE 9 – 16
3. Other related items
A. Maintenance timing display
The message of maintenance execution timing is displayed when
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
(1) (Maintenance timing) (Frameless)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
b. Transfer unit
• After completion of the maintenance, execute SIM 24-4 (Primary
and secondary transfer unit counters (number of the transfer unit
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
c. Fusing unit related
• After completion of the maintenance, execute SIM 24-4 (Fusing
unit counters (number of the fusing unit print counter, days of use
of the fusing unit) clear).
of the fusing unit) clear).
d. Drum related
• After completion of the maintenance, execute SIM 24-7 (Drum
counters (number of the drum print counter, accumulated travel-
ing distance of the drum) clear).
ing distance of the drum) clear).
e. Developer related
• After completion of the maintenance, execute SIM 24-5 (Devel-
oper counters (number of the developer print counter, accumu-
lated traveling distance of the developer) clear).
lated traveling distance of the developer) clear).
(2) [Maintenance timing] (Framed)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
(3) [Check the waste toner box.] (Framed)
• After detection of the waste toner full, reset the full detection by
opening/close of the front door.
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches 90%
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
Enable
CA
The maintenance counters (color) reaches
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
Enable
AA
The maintenance counters (both of total and
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
Enable
Code
Content
Print job
Enable/Disable
TK1
Primary transfer belt life end: 300K
Enable
TK2
Secondary transfer belt life end: 300K
Enable
Code
Content
Print job
Enable/Disable
FK1
Fusing upper heat roller life end: 200K
Enable
FK2
Fusing lower/external heat roller life end: 300K
Enable
FK3
Fusing web life end: 200K
Enable
Code
Content
Print job
Enable/Disable
DK
Drum life end (K) print counter: 300K or the
accumulated rotation number (K) of 840K.
accumulated rotation number (K) of 840K.
Enable
DC
Drum life end (C) print counter: 100K or the
accumulated rotation number (C) of 840K.
accumulated rotation number (C) of 840K.
Enable
DM
Drum life end (M) print counter: 100K or the
accumulated rotation number (M) of 840K.
accumulated rotation number (M) of 840K.
Enable
DY
Drum life end (Y) print counter: 100K or the
accumulated rotation number (Y) of 840K.
accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
VK
Developer life end (K) print counter: 300K or
the accumulated rotation number (K) of 840K.
the accumulated rotation number (K) of 840K.
Enable
VC
Developer life end (C) print counter: 100K or
the accumulated rotation number (C) of 840K.
the accumulated rotation number (C) of 840K.
Enable
VM
Developer life end (M) print counter: 100K or
the accumulated rotation number (M) of 840K.
the accumulated rotation number (M) of 840K.
Enable
VY
Developer life end (Y) print counter: 100K or
the accumulated rotation number (Y) of 840K.
the accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
CA
The maintenance counters (color) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
AA
The maintenance counters (both of total and
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
Disable
Code
Content
Print job
Enable/Disable
—
Waste toner full
Disable
MX-7000N MAINTENANCE 9 – 16
3. Other related items
A. Maintenance timing display
The message of maintenance execution timing is displayed when
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
(1) (Maintenance timing) (Frameless)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
b. Transfer unit
• After completion of the maintenance, execute SIM 24-4 (Primary
and secondary transfer unit counters (number of the transfer unit
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
c. Fusing unit related
• After completion of the maintenance, execute SIM 24-4 (Fusing
unit counters (number of the fusing unit print counter, days of use
of the fusing unit) clear).
of the fusing unit) clear).
d. Drum related
• After completion of the maintenance, execute SIM 24-7 (Drum
counters (number of the drum print counter, accumulated travel-
ing distance of the drum) clear).
ing distance of the drum) clear).
e. Developer related
• After completion of the maintenance, execute SIM 24-5 (Devel-
oper counters (number of the developer print counter, accumu-
lated traveling distance of the developer) clear).
lated traveling distance of the developer) clear).
(2) [Maintenance timing] (Framed)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
(3) [Check the waste toner box.] (Framed)
• After detection of the waste toner full, reset the full detection by
opening/close of the front door.
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches 90%
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
Enable
CA
The maintenance counters (color) reaches
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
Enable
AA
The maintenance counters (both of total and
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
Enable
Code
Content
Print job
Enable/Disable
TK1
Primary transfer belt life end: 300K
Enable
TK2
Secondary transfer belt life end: 300K
Enable
Code
Content
Print job
Enable/Disable
FK1
Fusing upper heat roller life end: 200K
Enable
FK2
Fusing lower/external heat roller life end: 300K
Enable
FK3
Fusing web life end: 200K
Enable
Code
Content
Print job
Enable/Disable
DK
Drum life end (K) print counter: 300K or the
accumulated rotation number (K) of 840K.
accumulated rotation number (K) of 840K.
Enable
DC
Drum life end (C) print counter: 100K or the
accumulated rotation number (C) of 840K.
accumulated rotation number (C) of 840K.
Enable
DM
Drum life end (M) print counter: 100K or the
accumulated rotation number (M) of 840K.
accumulated rotation number (M) of 840K.
Enable
DY
Drum life end (Y) print counter: 100K or the
accumulated rotation number (Y) of 840K.
accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
VK
Developer life end (K) print counter: 300K or
the accumulated rotation number (K) of 840K.
the accumulated rotation number (K) of 840K.
Enable
VC
Developer life end (C) print counter: 100K or
the accumulated rotation number (C) of 840K.
the accumulated rotation number (C) of 840K.
Enable
VM
Developer life end (M) print counter: 100K or
the accumulated rotation number (M) of 840K.
the accumulated rotation number (M) of 840K.
Enable
VY
Developer life end (Y) print counter: 100K or
the accumulated rotation number (Y) of 840K.
the accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
CA
The maintenance counters (color) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
AA
The maintenance counters (both of total and
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
Disable
Code
Content
Print job
Enable/Disable
—
Waste toner full
Disable
MX-7000N MAINTENANCE 9 – 16
3. Other related items
A. Maintenance timing display
The message of maintenance execution timing is displayed when
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
(1) (Maintenance timing) (Frameless)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
b. Transfer unit
• After completion of the maintenance, execute SIM 24-4 (Primary
and secondary transfer unit counters (number of the transfer unit
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
c. Fusing unit related
• After completion of the maintenance, execute SIM 24-4 (Fusing
unit counters (number of the fusing unit print counter, days of use
of the fusing unit) clear).
of the fusing unit) clear).
d. Drum related
• After completion of the maintenance, execute SIM 24-7 (Drum
counters (number of the drum print counter, accumulated travel-
ing distance of the drum) clear).
ing distance of the drum) clear).
e. Developer related
• After completion of the maintenance, execute SIM 24-5 (Devel-
oper counters (number of the developer print counter, accumu-
lated traveling distance of the developer) clear).
lated traveling distance of the developer) clear).
(2) [Maintenance timing] (Framed)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
(3) [Check the waste toner box.] (Framed)
• After detection of the waste toner full, reset the full detection by
opening/close of the front door.
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches 90%
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
Enable
CA
The maintenance counters (color) reaches
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
Enable
AA
The maintenance counters (both of total and
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
Enable
Code
Content
Print job
Enable/Disable
TK1
Primary transfer belt life end: 300K
Enable
TK2
Secondary transfer belt life end: 300K
Enable
Code
Content
Print job
Enable/Disable
FK1
Fusing upper heat roller life end: 200K
Enable
FK2
Fusing lower/external heat roller life end: 300K
Enable
FK3
Fusing web life end: 200K
Enable
Code
Content
Print job
Enable/Disable
DK
Drum life end (K) print counter: 300K or the
accumulated rotation number (K) of 840K.
accumulated rotation number (K) of 840K.
Enable
DC
Drum life end (C) print counter: 100K or the
accumulated rotation number (C) of 840K.
accumulated rotation number (C) of 840K.
Enable
DM
Drum life end (M) print counter: 100K or the
accumulated rotation number (M) of 840K.
accumulated rotation number (M) of 840K.
Enable
DY
Drum life end (Y) print counter: 100K or the
accumulated rotation number (Y) of 840K.
accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
VK
Developer life end (K) print counter: 300K or
the accumulated rotation number (K) of 840K.
the accumulated rotation number (K) of 840K.
Enable
VC
Developer life end (C) print counter: 100K or
the accumulated rotation number (C) of 840K.
the accumulated rotation number (C) of 840K.
Enable
VM
Developer life end (M) print counter: 100K or
the accumulated rotation number (M) of 840K.
the accumulated rotation number (M) of 840K.
Enable
VY
Developer life end (Y) print counter: 100K or
the accumulated rotation number (Y) of 840K.
the accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
CA
The maintenance counters (color) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
AA
The maintenance counters (both of total and
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
Disable
Code
Content
Print job
Enable/Disable
—
Waste toner full
Disable
MX-7000N MAINTENANCE 9 – 16
3. Other related items
A. Maintenance timing display
The message of maintenance execution timing is displayed when
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
each counter reaches the set value. The relationship between the
messages and the counters is shown blow.
(1) (Maintenance timing) (Frameless)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
b. Transfer unit
• After completion of the maintenance, execute SIM 24-4 (Primary
and secondary transfer unit counters (number of the transfer unit
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
print counter, accumulated traveling distance of the transfer unit,
days of use of the transfer unit) clear).
c. Fusing unit related
• After completion of the maintenance, execute SIM 24-4 (Fusing
unit counters (number of the fusing unit print counter, days of use
of the fusing unit) clear).
of the fusing unit) clear).
d. Drum related
• After completion of the maintenance, execute SIM 24-7 (Drum
counters (number of the drum print counter, accumulated travel-
ing distance of the drum) clear).
ing distance of the drum) clear).
e. Developer related
• After completion of the maintenance, execute SIM 24-5 (Devel-
oper counters (number of the developer print counter, accumu-
lated traveling distance of the developer) clear).
lated traveling distance of the developer) clear).
(2) [Maintenance timing] (Framed)
a. Maintenance related
• After completion of the maintenance, execute SIM 24-4 (Mainte-
nance counters (total, color) clear).
(3) [Check the waste toner box.] (Framed)
• After detection of the waste toner full, reset the full detection by
opening/close of the front door.
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches 90%
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
of the set value of SIM21-1, or they reaches
the set value of SIM21-1 but SIM26-38 is set to
Print Enable.
Enable
CA
The maintenance counters (color) reaches
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
90% of the set value of SIM21-1, or they
reaches the set value of SIM21-1 but SIM26-
38 is set to Print Enable.
Enable
AA
The maintenance counters (both of total and
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
color) reaches 90% of the set value of SIM21-
1, or they reaches the set value of SIM21-1 but
SIM26-38 is set to Print Enable.
Enable
Code
Content
Print job
Enable/Disable
TK1
Primary transfer belt life end: 300K
Enable
TK2
Secondary transfer belt life end: 300K
Enable
Code
Content
Print job
Enable/Disable
FK1
Fusing upper heat roller life end: 200K
Enable
FK2
Fusing lower/external heat roller life end: 300K
Enable
FK3
Fusing web life end: 200K
Enable
Code
Content
Print job
Enable/Disable
DK
Drum life end (K) print counter: 300K or the
accumulated rotation number (K) of 840K.
accumulated rotation number (K) of 840K.
Enable
DC
Drum life end (C) print counter: 100K or the
accumulated rotation number (C) of 840K.
accumulated rotation number (C) of 840K.
Enable
DM
Drum life end (M) print counter: 100K or the
accumulated rotation number (M) of 840K.
accumulated rotation number (M) of 840K.
Enable
DY
Drum life end (Y) print counter: 100K or the
accumulated rotation number (Y) of 840K.
accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
VK
Developer life end (K) print counter: 300K or
the accumulated rotation number (K) of 840K.
the accumulated rotation number (K) of 840K.
Enable
VC
Developer life end (C) print counter: 100K or
the accumulated rotation number (C) of 840K.
the accumulated rotation number (C) of 840K.
Enable
VM
Developer life end (M) print counter: 100K or
the accumulated rotation number (M) of 840K.
the accumulated rotation number (M) of 840K.
Enable
VY
Developer life end (Y) print counter: 100K or
the accumulated rotation number (Y) of 840K.
the accumulated rotation number (Y) of 840K.
Enable
Code
Content
Print job
Enable/Disable
TA
The maintenance counters (total) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
CA
The maintenance counters (color) reaches the
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
set value of SIM21-1, and SIM26-38 is set to
Print Disable.
Disable
AA
The maintenance counters (both of total and
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
color) reaches the set value of SIM21-1, and
SIM26-38 is set to Print Disable.
Disable
Code
Content
Print job
Enable/Disable
—
Waste toner full
Disable