DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Service Manual ↓ Size: 1.97 MB | Pages: 19 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man44)
Pages
19
Size
1.97 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / External View Internal Structure
File
mx-5500n-mx-6200n-mx-7000n-sm44.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Service Manual ▷ View online

MX-7000N  EXTERNAL VIEW AND INTERNAL STRUCTURE  5 – 3
C. Auto document feeder and document cover
D. Connectors
No.
Name
Function/Operation
1
Document feeding area cover
Open to remove a misfeed original.
2
Original guides
These help ensure that the original is scanned correctly. Adjust the guides to the width of the original.
3
Document feeder tray
Place originals in this tray. 1-sided originals must be placed face up.
4
Original exit tray
Originals are delivered to this tray after scanning.
5
Scanning area
Originals placed in the document feeder tray are scanned here.
6
Original size detector
This detects the size of an original placed on the document glass.
7
Document glass
Use this to scan a book or other thick original that cannot be fed through the automatic document feeder.
No.
Name
Function/Operation
1
USB connector (A type)
This is used to connect a USB device such as USB memory to the machine.
For the USB cable, use a shielded cable.
2
USB connector (B type)
A computer can be connected to this connector to use the machine as a printer.
For the USB cable, use a shielded cable.
3
LAN connector
Connect the LAN cable to this connector when the machine is used on a network.
For the LAN cable, use a shielded type cable.
4
Service-only connector
Important note for service technicians:
The cable connected to the service connector must be less than 118" (3 m) in length.
5
Power plug
1
2
3 4
5
6
7
1
2
3
4
5
MX-7000N  EXTERNAL VIEW AND INTERNAL STRUCTURE  5 – 4
E. Operation panel
No.
Name
Function/Operation
1
Touch panel
Messages and keys appear in the touch panel display.
Touch the displayed keys to perform a variety of operations.
When a key is touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform 
an operation.
2
[HOME] key
Touch this key to display the home screen. Frequently used settings can be registered in the home screen to enable 
quick and easy operation of the machine.
3
[SYSTEM SETTINGS] key
Press this key to display the system settings menu screen. The system settings are used to configure paper tray 
settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.
4
Numeric keys
These are used to enter the number of copies, fax numbers, and other numerical values.
5
[CLEAR] key
Press this key to return the number of copies to "0".
6
PRINT mode indicators
• READY indicator
Print jobs can be received when this indicator is lit.
• DATA indicator
This blinks while print data is being received and lights steadily while printing is taking place.
7
IMAGE SEND mode indicators
• LINE indicator
This lights up during transmission or reception of a fax or Internet fax. This also lights during transmission of an image 
in scan mode.
• DATA indicator
This blinks when a received fax or Internet fax cannot be printed because of a problem such as out of paper. This 
lights up when there is a transmission job that has not been sent.
8
[JOB STATUS] key
Press this key to display the job status screen. The job status screen is used to check information on jobs and to cancel 
jobs.
9
[LOGOUT] key
Press this key to log out after you have logged in and used the machine. When using the fax function, this key can also 
be pressed to send tone signals on a pulse dial line.
10
[#/P] key
When using the copy function, press this key to use a job program. When using the fax function, this key can be used 
when dialing.
11
[CLEAR ALL] key
Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that have been selected and start operation from the initial state.
12
[STOP] key
Press this key to stop a copy job or scanning of an original.
13
[BLACK & WHITE START] key
Press this key to copy or scan an original in black and white. This key is also used to send a fax in fax mode.
14
[COLOR START] key
Press this key to copy or scan an original in color.
This key cannot be used for fax or Internet fax.
15
[POWER SAVE] key / indicator
Use this key to put the machine into auto power shut-off mode to save energy.
The [POWER SAVE] key blinks when the machine is in auto power shut-off mode.
16
[POWER] key
Use this key to turn the machine power on and off.
17
Main power indicator
This lights up when the machine's main power switch is in the "on" position.
LOGOUT
LINE
PRINT
IMAGE SEND
DATA
DATA
READY
SYSTEM
SETTINGS
HOME
JOB STATUS
1
2
3
4
5
6
14
17
16
15
7 8
9
10 11 12 13
MX-7000N  EXTERNAL VIEW AND INTERNAL STRUCTURE  5 – 5
F. Print and send status (Job status)
No.
Name
Function/Operation
1
Mode select tabs
Use these tabs to select print mode, scan mode, fax mode, or Internet fax mode.
• The [Print Job] tab shows copy, print, received fax, received Internet fax, and self print jobs.
• The [Scan to] tab shows transmission jobs that use the scanner function.
• The [Fax Job] tab shows transmission (and reception) jobs that use the fax and PC-Fax functions.
• The [Internet Fax] tab shows transmission (and reception) jobs that use the Internet fax and PC Internet Fax functions.
2
Job list
• This shows jobs that are reserved and in progress (job queue), and jobs that have been completed.
When the [Print Job] tab is touched in the mode select tabs, the job status screen selector key changes and the 
"Spool" list appears.
A brief description of each job and its status appears in the list.
• The "Spool" screen shows spooled print jobs and encrypted PDF jobs waiting for password entry. To move an 
encrypted PDF job from the spool list to the job queue, touch the key of the job and enter the job password.
3
Job status screen selector key
This switches the job list display between spooled jobs, the job queue, and completed jobs.
"Spool": This shows spooled print jobs and encrypted PDF jobs waiting for password entry. "Spool" appears when print 
jobs are displayed.
"Job Queue": This shows reserved jobs and the job in progress.
"Complete": This shows completed jobs.
4
"Paper Empty" display
Add paper.
When the status is "Paper Empty", the specified size of paper for the job is not loaded in any of the trays. In this case, the 
job will be held until the required size of paper is loaded. Other jobs that are waiting will be printed (if possible) ahead of 
the held job. (However, other jobs will not be printed if the paper ran out while printing was in progress.)
If you need to change the paper size because the specified paper size is not available, touch the key of the job in the job 
list (2) to select it, touch the [Detail] key described in (6), and select a different paper size.
5
[
↓] [↑] keys
These change the page of the displayed job list.
6
[Detail] key
This shows detailed information on a selected job.
When a job has been stored using Quick File or File in document filing mode, or when a broadcast transmission has 
been performed in image send mode, the job appears as a key in the completed jobs screen. You can touch the [Detail] 
key to show details on the completed job, and you can also touch the [Call] key to reprint or resend the job.
7
[Priority] key
A reserved job in the "Job Queue" screen can be printed ahead of all other reserved jobs by selecting the job and then 
touching this key.
In the print job queue, select the print or copy job to which you wish to give priority and touch this key. The job in progress 
stops and printing of the selected job begins. When the selected job is completed, the interrupted job resumes.
8
[Stop/Delete] key
Use this key to cancel the job currently in progress or a selected reserved job. Note that printing of received faxes and 
received Internet faxes cannot be canceled.
9
[Call] key
A job that appears in the completed jobs screen as a key can be touched followed by the [Call] key to reprint or resend 
the job. This is the same [Call] key that appears when the [Detail] key is touched.
Spool
Complete
Job Queue
Detail
Call
Detail
Spool
Complete
Stop/Delete
2
3
4
002 / 000
Computer01
002 / 000
0312345678
001 / 000
Print Job
Job Queue
Sets / Progress
Status
Scan to
Fax Job
Internet Fax
Priority
1
1
Job Queue
1
020 / 001
Paper Empty
Waiting
Waiting
Copying
Copy
Copy
"Complete"
job screen
1
3
4
5
6
7
8
9
2
MX-7000N  EXTERNAL VIEW AND INTERNAL STRUCTURE  5 – 6
G. Sensors
Signal 
name
Name
Type
Function/Operation
Active condition
Note
APPD1
ADU transport path detection 1
Photo interrupter
Detects the duplex (ADU) upstream 
paper pass.
APPD2
ADU transport path detection 2
Photo interrupter
Detects the duplex (ADU) midstream 
paper pass.
C3LUD
Tray 3 upper limit detection 
(Lift HP detection)
Photo interrupter
Tray 3 upper limit detection
C3PED
Tray 3 paper empty detection
Photo interrupter
Tray 3 paper empty detection
C3PFD
Tray 3 paper entry detection
Reflection type
Tray 3 paper pass detection
C3PWD
Tray 3 width detection
Volume resistor
Tray 3 paper width detection
C3SPD
Tray 3 remaining quantity 
detection 
Photo interrupter
Tray 3 paper remaining quantity 
detection 
C3SS1
Tray 3 rear edge detection 1
Tact switch
Either of rear edge 1 - 4 of tray 3 is 
detected to detect tray insertion.
The paper size of tray 3 is detected.
PWB unit
C3SS2
Tray 3 rear edge detection 2
Tact switch
C3SS3
Tray 3 rear edge detection 3
Tact switch
C3SS4
Tray 3 rear edge detection 4
Tact switch
T1SPD
T2SPD
MHPS
HTCS_Y HTCS_M
DHPD_Y
TCS_Y
TH2
TCS_M
TCS_C DHPD_C
C4SPD
TNFD
TBBOX
C3SPD
C4LUD
C4PFD
TCS_K
PPD1
C3SS2
C3SS1
C3SS3
C4SS1
C4SS3
C3SS4
C4SS2
C4SS4
T1PPD1
T1PPD2
DHPD_K
PCS_CL/
PCS_K/
REG_F/
REG_R
POD1
APPD1
DSW_ADU
HTCS_K
DHPD_M
HTCS_C
TBLTC
PPD2
APPD2
PTCM_HP
THPS
CCMD
CCHP
T1LUD/T1PED
T2LUD/T2PED
C3PWD
DSW_D
MPED
MPWS
MTOP2
MPLD1
MTOP1
HUD_M/
TH_M
MPFD
LPPD
C3PED
C4PED
C3LUD
C3PFD
T2
T2PPD
TBLTB
OCSW
TFD
POD2
PO_TMP
TFD_R
POD3
TANSET
VTOD
TH1
WEB_END
SPPD2
SPPD3
SPPD4
SOCD
SLCOV
SPPD5
SPOD
SPED2
STLD
SPPD1
SCOV
SPRDMD STUD
SPED1
SPWS
SPLS1
SPLS2
WEB_INL
Page of 19
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Service Manual ▷ Download

  • DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Service Manual ↓ Size: 1.97 MB | Pages: 19 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Copying Equipment. Information contained in Sharp MX-5500N / MX-6200N / MX-7000N (serv.man44) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.