DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man36) Service Manual ↓ Size: 1.07 MB | Pages: 6 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man36)
Pages
6
Size
1.07 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-FXX1-Fax Expansion Kit-Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm36.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man36) Peripheral ▷ View online

MX-7000N  MX-FXX1  13 – 5
H. Set the destination and the logo type
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
∗], [C], and [∗] to enter the simulation mode.
2)
Use the numeric keys to enter [26] in the main code entry
screen shown below and press the [START] key.
3)
Use the numeric keys to enter [06] in the sub-code entry
screen shown below and press the [START] key.
4)
Press the desired destination on the touch panel and press
[EXECUTE] to highlight it.
5)
Press the [CA] key or the [SYSTEM SETTINGS] key to exit
from the simulation mode. The message [PLEASE TURN
MAIN POWER OFF THEN ON] is displayed.
Restart the machine to change the destination.
• List of destinations
I. Clear the FAX related software switches
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
∗], [C], and [∗] to enter the simulation mode.
2)
Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key.
3)
Use the numeric keys to enter [02] in the sub-code entry
screen shown below and press the [START] key.
4)
Use numeric keys [0] and [1] to enter the desired 8-digit coun-
try code.
After entry, press [SET], [EXECUTE], and [YES] in this order.
• Country code list screen
* Press the [DEST CODE] button on the initial screen to move to
the country code list screen.
To return to the input screen, press the [BACK] button.
J. Clear the image memory
1)
Switch the operation panel to the copy mode
and use the key operation [P], [*], [C], and [*] to enter the simu-
lation mode.
2)
Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key.
Display
Description
U.S.A
U.S.A.
CANADA
Canada
INCH
Inch system, other destinations
JAPAN
Japan
AB_B
AB system (B5 size detectable), other destinations
EUROPE
Europe
U.K.
U.K.
AUS.
Australia
AB_A
AB system (A5 size detectable), other destinations
CHINA
China
Country code list
JAPAN
: 00000000
U.S.A.
: 10110101
AUSTRALIA
: 00001001
U.K.
: 10110100
FRANCE
: 00111101
GERMANY
: 00000100
SWEDEN
: 10100101
NEWZEALAND
: 01111110
CHINA
: 00100110
SINGAPORE
: 10011100
TW
: 11111110
OTHER1
: 11111101
OTHER2
: 11111100
OTHER3
: 11111011
FINLAND
: 00111100
NORWAY
: 10000010
DENMARK
: 00110001
NETERLANDS
: 01111011
ITALY
: 01011001
SWITZERAND
: 10100110
AUSTRIA
: 00001010
INDONESIA
: 01010100
THAILAND
: 10101001
MALAYSIA
: 01101100
INDIA
: 01010011
PHILIPPINES
: 10001001
HONGKONG
: 01010000
RUSSIA
: 10111000
SOUTHAFRICA
: 10011111
SIMULATION NO66-02
TEST
FAX SOFT SWITCH CLEAR
CLOSE
JAPAN
: 00000000
U.S.A
: 10110101
AUSTRALIA
: 00001001
U.K
: 10110100
FRANCE
: 00111101
GERMANY
: 00000100
SWEDEN
: 10100101
NEWZEALAND
: 01111110
CHINA
: 00100110
SINGAPORE
: 10011100
TW
: 11111110
OTHER1
: 11111101
BACK
1/2
OTHER2
: 11111100
OTHER3
: 11111011
FINLAND
: 00111100
NORWAY
: 10000010
DENMARK
: 00110001
NETHERLANDS
: 01111011
ITALY
: 01011001
SWITZERAND
: 10100110
AUSTRIA
: 00001010
INDONESIA
: 01010100
THAILAND
: 10101001
MALAYSIA
: 01101100
MX-7000N  MX-FXX1  13 – 6
3)
Use the numeric keys to enter [10] in the sub-code entry
screen shown below and press the [START] key.
4)
In the submenu screen shown below, press [EXECUTE] on the
touch panel.
After [YES] on the panel lights up, press it.
5)
The screen shown below is displayed and memory clear oper-
ation is executed.
6)
After several minutes, memory clear operation is completed
and the [YES] button goes out. Press the [CA] key to exit from
the simulation mode.
Then the main unit is automatically rebooted.
K. Connection of the line cable
1)
Connect the line cable (Package part No. 1) of the line side to
the modular jack indicated with “LINE”.
• After connecting, be sure to carry out the "External phone
• For using an external telephone, wind the line cable around
the supplied ferrite core (Package part No. 5) by two turns
and connect the cable to the modular jack indicated with
"TEL".
FAX SOFT SW. SETTING.
FAX SOFT SW. CLEAR.
FAX PWB MEMORY CHECK.
SIGNAL OUTPUT CHECK. (LEVEL MAX)
LINE
TEL
Appro
x. 10
cm
MX-7000N  MX-FXX1  13 – 6
3)
Use the numeric keys to enter [10] in the sub-code entry
screen shown below and press the [START] key.
4)
In the submenu screen shown below, press [EXECUTE] on the
touch panel.
After [YES] on the panel lights up, press it.
5)
The screen shown below is displayed and memory clear oper-
ation is executed.
6)
After several minutes, memory clear operation is completed
and the [YES] button goes out. Press the [CA] key to exit from
the simulation mode.
Then the main unit is automatically rebooted.
K. Connection of the line cable
1)
Connect the line cable (Package part No. 1) of the line side to
the modular jack indicated with “LINE”.
• After connecting, be sure to carry out the "External phone
• For using an external telephone, wind the line cable around
the supplied ferrite core (Package part No. 5) by two turns
and connect the cable to the modular jack indicated with
"TEL".
FAX SOFT SW. SETTING.
FAX SOFT SW. CLEAR.
FAX PWB MEMORY CHECK.
SIGNAL OUTPUT CHECK. (LEVEL MAX)
LINE
TEL
Appro
x. 10
cm
MX-7000N  MX-FXX1  13 – 6
3)
Use the numeric keys to enter [10] in the sub-code entry
screen shown below and press the [START] key.
4)
In the submenu screen shown below, press [EXECUTE] on the
touch panel.
After [YES] on the panel lights up, press it.
5)
The screen shown below is displayed and memory clear oper-
ation is executed.
6)
After several minutes, memory clear operation is completed
and the [YES] button goes out. Press the [CA] key to exit from
the simulation mode.
Then the main unit is automatically rebooted.
K. Connection of the line cable
1)
Connect the line cable (Package part No. 1) of the line side to
the modular jack indicated with “LINE”.
• After connecting, be sure to carry out the "External phone
• For using an external telephone, wind the line cable around
the supplied ferrite core (Package part No. 5) by two turns
and connect the cable to the modular jack indicated with
"TEL".
FAX SOFT SW. SETTING.
FAX SOFT SW. CLEAR.
FAX PWB MEMORY CHECK.
SIGNAL OUTPUT CHECK. (LEVEL MAX)
LINE
TEL
Appro
x. 10
cm
Page of 6
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man36) Peripheral ▷ Download