DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man35) Service Manual ↓ Size: 1.03 MB | Pages: 5 in PDF or view online for FREE

MX-7000N  MX-FRX3, MX-FRX3U  9 – 5

in the MX-FRX3/MX-FRX3U operation manual is needed. Keep
this manual taking care not to lose it.

When first installing, check the document control function opera-
tion.
When carrying out machine changing or maintenance as follows,
check the document control function operation.
• Replacement that might adversely affect copy quality. (For exam-

ple, replacement of the transfer belts or the developer.)

• Replacement that might adversely affect scanning quality.
Describes details of the check operations following.
1)

Enable the document control function.
Touch the [SYSTEM SETTINGS], and touch the [DOCUMENT
CONTROL SETTING]. Set the copy mode to always print,
enable the document control function.

2)

Check the document control function.
a)

Set the color mode to full color with the initial screen of
copy.

b)

Set the pattern print color to the [Y (Yellow)] and [C
(Cyan)], set to the [Bk (Black)] with full color mode, then
copy the blank paper with B/W mode. Use the specified
A4 paper by SHARP, be sure to don't use the back print
paper.

c)

Set on the document table the each paper that printed by
procedure b), and copy it.

d)

After copy operating, [Detected the document control pat-
tern. Job is aborted.] is displayed on the touch panel. If the
message displayed and no print is made, the operation
check is completed.
If the result executed by each color ([Y (Yellow)] / [C
(Cyan)] / [Bk (Black)]) displays [Detected the document
control pattern. Job is aborted.], the operation check is
normally completed.

e)

When print is made at procedure d), check the connection
of the DOCC PWB.

f)

After check at the installing, touch the [SYSTEM SET-
TINGS], and touch the [DOCUMENT CONTROL SET-
TING], then set the copy mode to always unprint. (When
case of maintenance, set to the original user setting.)

MX-7000N  MX-FRX3, MX-FRX3U  9 – 5

in the MX-FRX3/MX-FRX3U operation manual is needed. Keep
this manual taking care not to lose it.

When first installing, check the document control function opera-
tion.
When carrying out machine changing or maintenance as follows,
check the document control function operation.
• Replacement that might adversely affect copy quality. (For exam-

ple, replacement of the transfer belts or the developer.)

• Replacement that might adversely affect scanning quality.
Describes details of the check operations following.
1)

Enable the document control function.
Touch the [SYSTEM SETTINGS], and touch the [DOCUMENT
CONTROL SETTING]. Set the copy mode to always print,
enable the document control function.

2)

Check the document control function.
a)

Set the color mode to full color with the initial screen of
copy.

b)

Set the pattern print color to the [Y (Yellow)] and [C
(Cyan)], set to the [Bk (Black)] with full color mode, then
copy the blank paper with B/W mode. Use the specified
A4 paper by SHARP, be sure to don't use the back print
paper.

c)

Set on the document table the each paper that printed by
procedure b), and copy it.

d)

After copy operating, [Detected the document control pat-
tern. Job is aborted.] is displayed on the touch panel. If the
message displayed and no print is made, the operation
check is completed.
If the result executed by each color ([Y (Yellow)] / [C
(Cyan)] / [Bk (Black)]) displays [Detected the document
control pattern. Job is aborted.], the operation check is
normally completed.

e)

When print is made at procedure d), check the connection
of the DOCC PWB.

f)

After check at the installing, touch the [SYSTEM SET-
TINGS], and touch the [DOCUMENT CONTROL SET-
TING], then set the copy mode to always unprint. (When
case of maintenance, set to the original user setting.)

MX-7000N  MX-FRX3, MX-FRX3U  9 – 5

in the MX-FRX3/MX-FRX3U operation manual is needed. Keep
this manual taking care not to lose it.

When first installing, check the document control function opera-
tion.
When carrying out machine changing or maintenance as follows,
check the document control function operation.
• Replacement that might adversely affect copy quality. (For exam-

ple, replacement of the transfer belts or the developer.)

• Replacement that might adversely affect scanning quality.
Describes details of the check operations following.
1)

Enable the document control function.
Touch the [SYSTEM SETTINGS], and touch the [DOCUMENT
CONTROL SETTING]. Set the copy mode to always print,
enable the document control function.

2)

Check the document control function.
a)

Set the color mode to full color with the initial screen of
copy.

b)

Set the pattern print color to the [Y (Yellow)] and [C
(Cyan)], set to the [Bk (Black)] with full color mode, then
copy the blank paper with B/W mode. Use the specified
A4 paper by SHARP, be sure to don't use the back print
paper.

c)

Set on the document table the each paper that printed by
procedure b), and copy it.

d)

After copy operating, [Detected the document control pat-
tern. Job is aborted.] is displayed on the touch panel. If the
message displayed and no print is made, the operation
check is completed.
If the result executed by each color ([Y (Yellow)] / [C
(Cyan)] / [Bk (Black)]) displays [Detected the document
control pattern. Job is aborted.], the operation check is
normally completed.

e)

When print is made at procedure d), check the connection
of the DOCC PWB.

f)

After check at the installing, touch the [SYSTEM SET-
TINGS], and touch the [DOCUMENT CONTROL SET-
TING], then set the copy mode to always unprint. (When
case of maintenance, set to the original user setting.)

MX-7000N  MX-FRX3, MX-FRX3U  9 – 5

in the MX-FRX3/MX-FRX3U operation manual is needed. Keep
this manual taking care not to lose it.

When first installing, check the document control function opera-
tion.
When carrying out machine changing or maintenance as follows,
check the document control function operation.
• Replacement that might adversely affect copy quality. (For exam-

ple, replacement of the transfer belts or the developer.)

• Replacement that might adversely affect scanning quality.
Describes details of the check operations following.
1)

Enable the document control function.
Touch the [SYSTEM SETTINGS], and touch the [DOCUMENT
CONTROL SETTING]. Set the copy mode to always print,
enable the document control function.

2)

Check the document control function.
a)

Set the color mode to full color with the initial screen of
copy.

b)

Set the pattern print color to the [Y (Yellow)] and [C
(Cyan)], set to the [Bk (Black)] with full color mode, then
copy the blank paper with B/W mode. Use the specified
A4 paper by SHARP, be sure to don't use the back print
paper.

c)

Set on the document table the each paper that printed by
procedure b), and copy it.

d)

After copy operating, [Detected the document control pat-
tern. Job is aborted.] is displayed on the touch panel. If the
message displayed and no print is made, the operation
check is completed.
If the result executed by each color ([Y (Yellow)] / [C
(Cyan)] / [Bk (Black)]) displays [Detected the document
control pattern. Job is aborted.], the operation check is
normally completed.

e)

When print is made at procedure d), check the connection
of the DOCC PWB.

f)

After check at the installing, touch the [SYSTEM SET-
TINGS], and touch the [DOCUMENT CONTROL SET-
TING], then set the copy mode to always unprint. (When
case of maintenance, set to the original user setting.)