DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Service Manual ↓ Size: 3.06 MB | Pages: 10 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man31)
Pages
10
Size
3.06 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-CFX1 Inserter-Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm31.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral ▷ View online

MX-7000N  MX-CFX1  5 – 7
2)
Check the height of rear cabinet of the inserter and rear cabi-
net of the finisher.
* When the height is properly adjusted, progress to the proce-
dure of "H. Check the clearance of the main unit and the
inserter". 
When the height is not properly adjusted, progress to the fol-
lowing procedures.
<Adjust of the height on front side>
3)
Remove each cabinet of the finisher, and loosen the front
caster fixing screws on the inserter side.
* The adjustment procedure is different according to the
installed finisher. For details, refer to the adjustment proce-
dure of each finisher.
4)
Turn the height adjustment bolt so that the upper cabinet may
become equal height.
5)
Tighten the caster fixing screws.
<Adjust of the height on rear side>
6)
Remove the rear cabinet of the finisher, and loosen the rear
caster fixing screws on the inserter side.
7)
Turn the height adjustment bolt so that the upper cabinet may
become equal height.
8)
Tighten the caster fixing screws.
Rear
MX-7000N  MX-CFX1  5 – 8
H. Check the clearance of the main unit and the 
inserter
1)
Put the inserter that has installed the finisher (Punch unit)
close to the main unit.
2)
Check from back and forth to insure that the upper and lower
clearances between the main unit and the finisher are even.
* When the upper and lower clearance is even, progress to
the procedure of "I. Touch of the auxiliary caster with the
floor". 
When the upper and lower clearance is not even, progress
to the following procedures.
3)
Remove each cabinet on the front and the rear side of the fin-
isher, and loosen the fixing screws of the front and rear caster
on the left side.
* The adjustment procedure is different according to the
installed finisher. For details, refer to the adjustment proce-
dure of each finisher.
4)
Use a spanner to turn the height adjustment bolt on the front
and the rear side so that upper and lower clearance is even.
MX-7000N  MX-CFX1  5 – 9
5)
Tighten the fixing screws of the front and rear caster on the left
side, and attach each cabinet on the front and the rear side of
the finisher.
I. Touch of the auxiliary caster with the floor.
1)
Remove the screws, and remove the left lower cover.
2)
Loosen the caster fixing screws.
3)
Touch the auxiliary caster to the floor, and tighten the caster
fixing screws so that the indicator scale is fit.
4)
Fix the left lower cover with the fixing screws.
J. Fixing of the tray
1)
pull out the tray, and fix with the fixing screws (Package part
No. 4).
1
2
3
MX-7000N  MX-CFX1  5 – 10
K. Connection of connector to the main unit
1)
Connect one of the two connector of the finisher to the main
body and connect one of another to the inserter, and tighten
each screws.
2)
Connect two connector of the inserter to the main unit, and
tighten the screw.
L. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
"ON"
ON
ON
Page of 10
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man31) service manuals if exist.