DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Service Manual ↓ Size: 3.06 MB | Pages: 10 in PDF or view online for FREE

MX-7000N  MX-CFX1  5 – 3

• Connection fixture F/R for MX-FNX3

(Screw used for installation : Package part No.3 of MX-FNX3)

• Connection fixture F/R for MX-FNX4

(Screw used for installation : Package part No.3 of MX-FNX4)

1)

Fix the connection fixture F to the inserter with the fixing
screws.
* The following figure is explanation of the connection fixture

and the screws for the connected with MX-PNX2 as exam-
ple.

2)

Fix the connection fixture R to the inserter with the fixing
screws.

1)

Attach the inserter to the finisher (or Punch unit).
* Match the sign of the inserter to connection plate, and

engage the inserter.

2)

Open the front door of finisher (or Punch unit).

3)

Fix the inserter and finisher (or Punch unit) with the fixing
screw (Package part No. 4 of MX-FNX3 or MX-FNX4).

X3

X3

X4

X4

MX-7000N  MX-CFX1  5 – 4

4)

Close the front cover of the finisher (or Punch unit).

5)

Remove the screws on rear side of the finisher (or Punch unit),
and remove the rear cover.

6)

Attach the fixing screw (Package part No. 4 of MX-FNX3 or
MX-FNX4).

7)

Install the rear cover of the finisher (or Punch unit) with the fix-
ing screws.

1)

Install the latch reception parts (Package part No. 8) to the
main unit with the fixing screws (Package part No. 1).

2)

Install the positioning pin (Package part No. 9) to the main unit
with the fixing screws (Package part No. 3).

* Be careful to the direction of the installation.

MX-7000N  MX-CFX1  5 – 5

1)

Engage the inserter that has installed finisher (Punch unit) to
the main unit.

2)

Release the lock, and remove the inserter from the main unit.

3)

Fix the rail (Package part No. 5) to the main unit side with the
fixing screws (Package part No. 2).

4)

Fix the rail to inserter with the fixing screws (Package part No.
1).

1)

Put the inserter that has installed the finisher (Punch unit)
close to the main unit.

2)

Check that the positioning pin of main unit is smoothly installed
to center of the guide for inserter positioning.

* When the positioning pin enters smoothly, progress to the

procedure of "G. Height adjustment of the finisher and the
inserter". 
When the positioning pin not enters smoothly, progress to
the following procedures.

3)

Loosen the fixing screws of the adjustment section on the rear
side of the inserter.

MX-7000N  MX-CFX1  5 – 6

4)

Turn the height adjustment bolt on the rear side so that the
height of the center of the positioning pin and the center of the
positioning guide is fit.

5)

Tighten the fixing screws of the adjustment section on the rear
side.

6)

Remove the screw, and open the rack cover.

7)

Loosen the fixing screws of the adjustment section on the front
side.

8)

Turn the height adjustment screws on the front side so that the
fixing screw of the adjustment section on the front side may
become the same position as a rear side. 

9)

Tighten the fixing screws of the adjustment section on the front
side.

10) Close the rack cover, and fix with the screw.

1)

Check the height of front cabinet of the inserter and front cabi-
net of the finisher.

Front