DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man30) Service Manual ↓ Size: 2.09 MB | Pages: 6 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man30)
Pages
6
Size
2.09 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-PNX2A-D Punch Module-Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm30.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man30) Peripheral ▷ View online

MX-7000N  MX-PNX2A/B/C/D  6 – 5
3)
Fix the main unit and the punch unit with the fixing screw
(Package part No. 4 of MX-FNX3 or MX-FNX4).
4)
Close the front door of punch unit.
5)
Install the fixing screw (Package part No. 4 of MX-FNX3 or
MX-FNX4) on rear side.
6)
Install the rear cover of punch unit with the fixing screws.
7)
By using nippers, split the removed connector cover of the fin-
isher along the perforated line.
8)
Install the connector cover of the finisher and fix it with the fix-
ing screw.
H. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
MX-7000N  MX-PNX2A/B/C/D  6 – 6
I. Punch position label attachment
1)
Attach the punch position label to the position indicated in the
figure.
[For scanner] (Package part No. 11 of MX-FNX3 or MX-FNX4)
[For DSPF] (Package part No. 12 of MX-FNX3 or MX-FNX4)
J. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Second label
Lose the clearance.
First label
Edge of R part in corner
* The corner of the upper
cabinet rear part
Reference line of
sticking label on.
edge R2.5
Tangential line
of R2.5
"ON"
ON
ON
MX-7000N  MX-PNX2A/B/C/D  6 – 6
I. Punch position label attachment
1)
Attach the punch position label to the position indicated in the
figure.
[For scanner] (Package part No. 11 of MX-FNX3 or MX-FNX4)
[For DSPF] (Package part No. 12 of MX-FNX3 or MX-FNX4)
J. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Second label
Lose the clearance.
First label
Edge of R part in corner
* The corner of the upper
cabinet rear part
Reference line of
sticking label on.
edge R2.5
Tangential line
of R2.5
"ON"
ON
ON
MX-7000N  MX-PNX2A/B/C/D  6 – 6
I. Punch position label attachment
1)
Attach the punch position label to the position indicated in the
figure.
[For scanner] (Package part No. 11 of MX-FNX3 or MX-FNX4)
[For DSPF] (Package part No. 12 of MX-FNX3 or MX-FNX4)
J. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Second label
Lose the clearance.
First label
Edge of R part in corner
* The corner of the upper
cabinet rear part
Reference line of
sticking label on.
edge R2.5
Tangential line
of R2.5
"ON"
ON
ON
Page of 6
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man30) Peripheral ▷ Download