DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man28) Service Manual ↓ Size: 2.55 MB | Pages: 8 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man28)
Pages
8
Size
2.55 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-FNX3 4K Finisher-Installation Manual
File
mx-5500n-mx-6200n-mx-7000n-sm28.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man28) Peripheral ▷ View online

MX-7000N  MX-FNX3  7 – 7
2)
Open the front cover of finisher.
3)
Fix the finisher to the main unit with the step screw B (Package
part No. 4).
4)
Close the front cover.
5)
Remove the screw, and remove the connector cover on rear
side of the finisher.
6)
Install the Step screw B (Package part No. 4).
7)
Attach the connector cover on rear side of the finisher.
F. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
MX-7000N  MX-FNX3  7 – 8
G. Staple position label attachment
1)
Attach the label to the position indicated in the figure.
[For scanner] (Package part No. 9)
[For DSPF] (Package part No. 10)
H. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Edge of R part in corner
Reference line of
sticking label on.
* The corner of the upper
cabinet rear part
"ON"
ON
ON
MX-7000N  MX-FNX3  7 – 8
G. Staple position label attachment
1)
Attach the label to the position indicated in the figure.
[For scanner] (Package part No. 9)
[For DSPF] (Package part No. 10)
H. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Edge of R part in corner
Reference line of
sticking label on.
* The corner of the upper
cabinet rear part
"ON"
ON
ON
MX-7000N  MX-FNX3  7 – 8
G. Staple position label attachment
1)
Attach the label to the position indicated in the figure.
[For scanner] (Package part No. 9)
[For DSPF] (Package part No. 10)
H. Turn ON the main power switch of the main 
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Edge of R part in corner
Edge of R part in corner
Reference line of
sticking label on.
* The corner of the upper
cabinet rear part
"ON"
ON
ON
Page of 8
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man28) Peripheral ▷ Download