Sharp MX-5500N / MX-6200N / MX-7000N (serv.man24) Peripheral ▷ View online
MX-CFX1 DISASSEMBLY AND ASSEMBLY 6 – 3
4) Remove the cover A.
5) Remove the tray unit.
6) Remove the cover A.
A: Horizontal pass roller 2
B: Timing roller
B: Timing roller
C. Reverse roller and reverse sensor
1)
Open the top cover.
2)
Remove the front cover and rear cover.
3)
Remove the guide A to remove the stay B.
4)
Remove the reverse unit.
5)
Remove the cover A.
A: Reverse sensor
B: Reverse roller
B: Reverse roller
A
1
2
2
3
A
A
B
1
2
A
B
1
2
2
3
A
MX-CFX1 DISASSEMBLY AND ASSEMBLY 6 – 4
D. Paper guide
3. Drive unit
A. Belts
1) Open the top cover.
2) Remove the rear cover.
2) Remove the rear cover.
B. Gears
1) Open the top cover.
2) Remove the rear cover.
3) Remove the drive unit.
2) Remove the rear cover.
3) Remove the drive unit.
4. PWB
A. Operation panel PWB
1)
Remove the front cover.
2)
Remove the operating unit.
3)
Remove the operation panel PWB.
B. Main control PWB
1)
Remove the rear cover.
2)
Remove the main control PWB.
5. Motor
A. Paper feed motor
1)
Remove the rear cover.
2)
Remove the drive unit.
3)
Remove the paper feed motor.
MX-CFX1 DISASSEMBLY AND ASSEMBLY 6 – 5
B. Transport motor
1) Remove the rear cover.
2) Remove the transport motor.
2) Remove the transport motor.
C. Reverse motor
1) Remove the front cover and rear cover.
2) Remove the reverse unit.
3) Remove the cover A.
2) Remove the reverse unit.
3) Remove the cover A.
4) Remove the reverse motor.
6. Other parts
A. Sensors
B. Tray sensor
1)
Open the top cover.
2)
Remove the front cover and rear cover.
3)
Remove the operating unit.
4)
Remove the tray unit.
5)
Disassemble the tray.
6)
Remove the tray sensor.
A
1
2
MX-CFX1 DISASSEMBLY AND ASSEMBLY 6 – 6
C. Registration sensor and empty sensor
1) Open the top cover.
2) Remove the front cover and rear cover.
3) Detach the top cover.
4) Remove the registration sensor and the empty sensor.
A: Empty sensor
B: Registration sensor
2) Remove the front cover and rear cover.
3) Detach the top cover.
4) Remove the registration sensor and the empty sensor.
A: Empty sensor
B: Registration sensor
D. Set sensor
1) Open the rear cover.
2) Remove the set sensor
2) Remove the set sensor
E. Reverse unit open/close sensor
1) Remove the front cover.
2) Remove the reverse unit open/close sensor.
2) Remove the reverse unit open/close sensor.
F. Paper exit sensor
1)
Remove the front cover and rear cover.
2)
Remove the reverse unit.
3)
Remove the cover. (See the step 3 of 5-C.)
4)
Remove the paper exit sensor.
G. Flapper solenoid
1)
Remove the rear cover.
2)
Remove the flapper solenoid.
A
B
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man24) service manuals if exist.