DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man209) Service Manual ↓ Size: 517.94 KB | Pages: 12 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man209)
Pages
12
Size
517.94 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / SERV PARTS SETTING OF MAIN UNIT CASSETTE TANDEM HEATER
File
mx-5500n-mx-6200n-mx-7000n-sm209.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man209) Service Manual / Technical Bulletin ▷ View online

6/12
Procedures
13.Mount the back plate (lower). (6 screws)
14. Mount the back plate (upper). (7 screws)
15.Turn on (place at “|” (ON) position) the heater switch and check that no shorting exist by measuring
resistances between L terminal of AC power plug and the ground, and between N terminal of AC power
plug and the ground.
*After checking, turn off the heater switch if the heater is not used.
7/12
Main unit tandem heater installation procedures
Quantity
Part name
Part code
EX100
EX200
Heater mount plate
LPLTM6089FCZZ
1
1
Heater harness sheet
PSHEZ5135FCZZ
1
1
RHETP0140FCPZ
1
0
Tandem dehumidifier heater
RHETP0142FCPZ
0
1
M3x8S tight
XHBS730P08000
1
1
Note: If the electrical component kit has not been installed, install the kit first.
Procedures
1.Affix the heater harness sheet onto the heater mount plate. (Pay attention to orientation)
*Degrease the affixing surface with alcohol before affixing the heater harness sheet.
2.Mount the dehumidifier heater onto the heater mount plate and hold it down with M3x8S tight.
8/12
Quantity
Part name
Part code
EX100
EX200
T heater cover
PCOVP1654FCZ2
1
1
Heater cover sheet
PSHEZ5012FCZZ
1
1
M3x8S tight
XHBS730P08000
2
2
Procedures
3.Affix the heater cover sheet onto the T heater cover.
*Degrease the affixing surface with alcohol before affixing the heater cover sheet.
4.Hold down the T heater cover in step 3 onto the heater mount plate in step 2 using the mounting M3x8S tight (x2).
5.Mount the snap band (1 band) of the dehumidifier heater onto the T heater cover.
9/12
Quantity
Part name
Part code
EX100
EX200
Heater mount screw
LX-BZ0987FCZZ
1
1
Edge holder
LHLDW1285FCZZ
1
1
M4x6S tight
XHBS740P06000
1
1
Procedures
6.Pull out first and second stages of the main unit cassette
7.Tighten the heater mount screw.
8.Mount the edge holder.
Page of 12
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man209) service manuals if exist.