DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Service Manual ↓ Size: 244.94 KB | Pages: 5 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man207)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
244.94 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / SCANNER DRYING HEATER AS SERVICE PART
File
mx-5500n-mx-6200n-mx-7000n-sm207.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Service Manual / Technical Bulletin ▷ View online

5/5
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
5/5
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
5/5
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
5/5
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
Page of 5
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Service Manual / Technical Bulletin ▷ Download