DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Service Manual ↓ Size: 11.13 MB | Pages: 30 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man19)
Pages
30
Size
11.13 MB
Type
PDF
Document
Peripheral
Brand
Device
Copying Equipment / MX-FNX3 4 MX-RBX2 MXPNX2A-D SERVICE MANUAL-Disassembly Assembly-2
File
mx-5500n-mx-6200n-mx-7000n-sm19.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral ▷ View online

MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 69
b. Removing waste full sensor PCB
1) Remove the screw [1], disconnect the connector [2], and
remove the waste full sensor PCB unit [3].
(5) Punch controller PCB
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing punch controller PCB
1) Remove the two screws [1] and disconnect the seven connec-
tors [7]. Then, remove the punch controller PCB [3].
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[2]
[1]
[3]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 69
b. Removing waste full sensor PCB
1) Remove the screw [1], disconnect the connector [2], and
remove the waste full sensor PCB unit [3].
(5) Punch controller PCB
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing punch controller PCB
1) Remove the two screws [1] and disconnect the seven connec-
tors [7]. Then, remove the punch controller PCB [3].
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[2]
[1]
[3]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 69
b. Removing waste full sensor PCB
1) Remove the screw [1], disconnect the connector [2], and
remove the waste full sensor PCB unit [3].
(5) Punch controller PCB
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing punch controller PCB
1) Remove the two screws [1] and disconnect the seven connec-
tors [7]. Then, remove the punch controller PCB [3].
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[2]
[1]
[3]
MX-FNX4  DISASSEMBLY AND ASSEMBLY  6 – 69
b. Removing waste full sensor PCB
1) Remove the screw [1], disconnect the connector [2], and
remove the waste full sensor PCB unit [3].
(5) Punch controller PCB
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing punch controller PCB
1) Remove the two screws [1] and disconnect the seven connec-
tors [7]. Then, remove the punch controller PCB [3].
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[2]
[1]
[3]
Page of 30
Display

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral ▷ Download