DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Service Manual ↓ Size: 160.14 KB | Pages: 13 in PDF or view online for FREE

Model
MX-5500N MX-6200N MX-7000N (serv.man134)
Pages
13
Size
160.14 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES.
File
mx-5500n-mx-6200n-mx-7000n-sm134.pdf
Date

Sharp MX-5500N / MX-6200N / MX-7000N (serv.man134) Service Manual / Technical Bulletin ▷ View online

1/1
IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST
IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE A-1)
CONTENTS OF CODE
CODE A-1
Final receive signal (Send side)
Final receive signal (Receive side)
0
Abnormal signal
Abnormal signal
1
NSF, DIS
(SID), (SUB), NSS, DCS
2
CFR
(PWD), (SEP), NSC, DTC
3
FTT
EOP
4
MCF
EOM
5
PIP, PIN
MPS
6
RTN, RTP
PRI-Q
7
No signal, DCN
DCN
8
PPR
PPS-EOP
9
PPS-EOM
10
PPS-MPS, PPS-NULL
11
RNR
RR
12
CTR
CTC
13
ERR
EOR-Q
14
PPS-PRI-Q
16
Abnormal signal
Abnormal signal
17
NSF, DIS
SID, SUB, NSS, DCS
18
CFR
PWD, SEP, NSC, DTC
19
FTT
PPS-EOP
20
MCF
PPS-EOM
21
PIP, PIN
PPS-MPS, PPS-NULL
22
RTN, RTP
PRI-Q
23
No signal, DCN
DCN
24
PPR
25
RNR
RR
26
CTR
CTC
27
ERR
EOR-Q
28
PPS-PRI-Q
29
V.8 Phase-1
V.8 Phase-1
30
V.8 Phase-2
V.8 Phase-2
31
V.8 Phase-3
V.8 Phase-3
1/3
IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE A-2)
CONTENTS OF CODE
CODE A-2
Content of communication interruption
33
The calling side cannot establish connection with the remote party.
34
A communication interruption command is made during sending/receiving. The interruption key
is pressed for interruption of input. <Send/Receive/Polling/Bulletin board>
35
Power is failed during sending/receiving. <Send/Receive/Polling/Bulletin board>
36
Not used
37
Not used
38
Memory over during reception. <Receive/Polling>
Print is not made during reception in acting reception inhibit. <Receive/Polling>
39
Not used
40
Not used
41
The send data length of one page exceeds the limit (2m) in sending. <Send/Bulletin board>
42
The receive data length of one page exceeds the limit. <Receive/Polling>
43
Speaking before data transmission
44
A document jam occurs in direct sending. <Send>
45
Not used
46
The FAX signal from the remote party is not detected within T1 time. <Send/Polling>
(When in recall, however, the recall setting in case of a communication error is valid.)
47
A decode error occurs in the FAX board. <Send/Bulletin board>
Normal end of communication
OK in Internet FAX send with reception confirmation.
49
The called side does not have polling function in polling reception. <Polling>
The called side has no data to send. <Polling>
50
In polling reception, DCN is received for DTC. <Polling>
In polling sending, there is no send data. <Bulletin board>
51
In poling sending, the allow number is not matched. <Bulletin board>
In polling sending, the system number is not matched. <Bulletin board>
52
Not used
53
Not used
54
Not used
55
Not used
56
1) In relay command sending, DCN is received for NSS. <Send>
2) In relay command reception, a remote station number which is not registered is specified.
<Receive>
3) In F code relay broadcasting, an F code relay command is received.<Receive>
57
Not used
58
In reception, data are sent from a remote machine of receive inhibit number. <Receive>
(Not rejected in the bulletin board send or the F code bulletin board send.)
59
In F code polling (calling), the remote machine has no DIS bit 47 (polling function). <Polling>
In F code polling (calling), the called side has no send data. (DIS bit 9 is 0.)<Polling>
60
In F code polling (calling), DCN is received for SEP. <Polling>
In bulletin board, there is no send data for SEP. <Bulletin board>
61
In bulletin board, the sub address (bulletin board number (SEP)) is not matched. <Bulletin
board>
62
In bulleting board, the pass code (PWD) is not matched. <Bulletin board>
63
In F code sending, the remote machine has no DIS bit 49 (sub address function). <Send>
(Check that the remote machine conforms to F code.)
64
In F code sending : <Send>
1) DCN is received for SUB. --- Check the box number.
2) DCN is received for SID. --- Check the box number and pass code.
In F code receiving : <Receive>"F code relay broadcasting" or "F code confidential reception"
is "Inhibited with soft SW."
67
In F code receiving, the pass code (SID) is not matched. <Receive>
68
In F code reception, a box number which is not registered is specified. (SUB is not matched.)
<Receive>
69
Memory over in quick online sending <Send>
48
2/3
IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE A-2)
CONTENTS OF CODE
CODE A-2
Content of communication interruption
70
In PC-FAX reservation, the number of remote parties is exceeded. <Send>
71
In PC-FAX reservation, data sent from PC includes some errors. <Send>
72
In department management setting on the machine side:
・ In reservation from PC-FAX or PC-Internet FAX, a department number which is not
registered on the machine side is specified. <Send>
・ In reservation from PC-FAX or PC-Internet FAX, the department number is not specified.
<Send>
73
In reservation from PC-FAX or PC-Internet FAX, the use quantity limit is exceeded. <Send>
74
When reserving specified filing in document filing in PC-FAX or PC-Internet FAX;
・ The pass-code for the folder is set on the machine side and the pass-code from PC-XXX
does not match with it. <Send>
・ The pass-code for the folder is set on the machine side and no pass-code is specified by
PC-XXX. <Send>
75
・ Reservation cannot be made due to machine busy. (Reservation of PC-FAX cannot be
accepted.)
 
・ When "PC-FAX or PC-internet FAX send inhibit" is set on the machine side.
76
Reserved with receive confirmation request in PC-Internet FAX, but the Internet FAX sender is
not registered on the machine side. <Send>
77
In reserving specified filing in PC-FAX or PC-Internet FAX, the machine has no filing function.
78
The filing function is inhibited on the machine side when filing specification is reserved by PC-
FAX or PC-Internet FAX.
79
An authentication error occurs when PC-FAX or PC-Internet FAX is reserved.
80
NIC connect failure (network abnormality)
・ Check for disconnection of cables.
・  A network trouble (CE-XX) occurs.
・  The port is set to DISABLE.
・  Authentication of the POP server is failed when POP before SMTP is enabled.
・ When an error other than the communication result code 93 or 94 in D-SMTP send (including
error response of 5XX)
81
In Internet FAX send, reply of receive confirmation of the remote machine is not normal.
(Including PC-Internet FAX).
・ Error of the disposition-modifier.
・ The disposition modifier is not in an error, and the disposition type is other than displayed,
dispatched, or processed.
82
In Internet FAX send, time-out occurs in waiting for receive confirmation from the remote
machine. (Including PC-Internet FAX).
・ In a case where send confirmation wait time-out time is other than 0, when send confirmation
reply from an Internet FAX destination is not received.
・ Recalls of the set number of recalls are performed, but send confirmation reply from an
internet AFX destination is not received.
83
In E-mail/FTP, Internet FAX send, the send data size exceeds the upper limit of send data.
84
In e-mail receive, a sender is registered in receive reject address/domain. <Receive>
85
In e-mail receive, an error occurs in communication with POP3 server.
・ Header acquisition error.
・ Time-out during mail receive
86
In e-mail receive, an unsupported attached file is received.
Only the TIFF-F type is supported for attached files.
・ The TIFF-F type of the attached file cannot be recognized.
・ There is no attached file.
87
In e-mail receive, an attached file cannot be stored in memory.
・ Memory over
3/3
IMAGE SEND MODE,FAX MODE JOB LOG CODE LIST(CODE A-2)
CONTENTS OF CODE
CODE A-2
Content of communication interruption
88
In SMTP e-mail receive, an attached file cannot be stored in memory.
・ Cannot be stored in memory.
・ The number of items of acting receive data is the maximum, and an additional data cannot be
stored.
89
In SMTP e-mail receive, an error occurs in communication with the mail server.
・ Time-out occurs during e-mail receive.
90
After reservation by re-operation of document filing, conversion for image send cannot be
made.
91
Data cannot be written to the memory device when Scan To USB is executed.
 
・ The memory device is disconnected during writing to the memory device.
 
・ An error occurs due to a memory device trouble.
92
The USB device memory overflows during writing data into the memory device when "Scan to
USB" is executed.
93
When error in D-SMTP send (with recall)
 
・ An error response of 4XX occurs during communication with the SMTP server.
 
・ Time out occurs after establishment of connection with the SMTP server.
94
When busy in D-SMTP send
Time out occurs during establishment of connection with the SMTP server.
95
When the path is too long in execution of Scan To USB.
98
The copy inhibit pattern is detected when scanning a document.
99
A document which is inhibited to be copied such as a banknote is scanned.
Page of 13
Display

Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man134) service manuals if exist.