Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man124) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
scan mode to the job queue and start printing after the completion of scan
mode, and also not to enter to Remote PC scan mode while the printer job is
performed.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
34
Printer
Correction of failure to output proper number of multiple page PS business
forms data
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
35
Printer
Correction of failure to print text data which contain particular text string
○
○
Done
Done
36
Printer
Correction of unstable operations such as failure to print from a PC with USB
connection.
○
○
Done
Done
37
Printer
Correction of the problem that PDF direct print cannot be used for the
specific PDF data.
○
○
Done
Done
38
Printer
Correction of the following problem:
When performing PDF direct print, if 2-Up Pamphlet with A3/WLT is
specified, it is finished with 2-up Pamphlet on A4/LT.
○
○
Done
Done
39
Printer
Correction of the problem that the machine locks up while displaying
“Rendering”if 1200dpi/Dot Screen is specified when printing from Mac
“Rendering”if 1200dpi/Dot Screen is specified when printing from Mac
○
○
Done
Done
40
Printer
Correction of the following problem:
When starting the print on the master device and the slave device at the
same time on the printer release, either of them cannot print.
○
○
Done
Done
41
Printer
Correction of the problem that it will be 1-sided print when performing the
pamphlet print with A4 original
○
○
Done
Done
42
Network
Implementation of IPv6 support for operation of following items:
- NX2.0 browser to display OSA on main unit
- List Print
- Direct SMTP
○
○
○
○
43
Network
Correction of display of unnecessary screen
This problem
occurs after pressing “Close the Session” key on Action Panel
while operating with Google Drive.
○
○
○
○
44
Network
Correction of machine lockup which occurs after receiving particular packet
data containing the invalid information in Header information.
○
○
○
○
45
Network
When the job queue becomes full while printing from Google Drive,
Application Error occurs but the modification has been made to display the
error message "Job queue memory is full. Job cannot run."
○
○
○
○
46
Network
Allowing usage of SharePoint/OneDrive entering full domain name or facility
name in Office365
○
○
○
○
47
Network
Correction of the problem which cannot switch the multiple LDAP servers in
Global Address Search when User Authentication is disabled and
Authentication Settings is set to Active Directory
○
○
○
○
48
Network
Correction of the problem that Cookie may not be saved on OSA using
NX2.0 browser
○
○
○
○
49
Network
Correction of failure to display customized Function Menu for Easy Mode on
screen.
This problem occurs when user authentication (internal / external
authentication) is enabled.
○
○
○
○
50
Network
Correction of the following problem:
If the capital letter is contained in the account name entered in User
Authentication, it may become impossible to scan in OneDrive after
○
○
○
○
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
selecting the folder.
51
Network
Correction of the following problem:
If the file is repeatedly uploaded to OneDrive, the error message is displayed
after the start of transmission, and then the transmission may fail.
○
○
○
○
52
Network
Selection of 300dpi or 400dpi is available as the resolution if
DOCX/XLSX/PPTX format is selected when using the scanner function
○
○
○
○
53
Network
Specification for GoogleDrive, OneDrive, SharePoint, and Online has been
expanded.
○
○
○
○
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
54
Network
Following measurements have been done on transferring Address Book:
*Add the Admin password of the forwarding machine to the item of entry.
*Add the topic of “Forward Destination Information” to the setting screen.
*Add the topic of “Forward Destination Information” to the setting screen.
○
○
○
○
55
Network
Execution of timed-deletion of auto-registered user
This has been executed for auto-registered OSA user but will also be
executed for other auto-registered user.
○
○
○
○
56
Network
Correction of user being able to login without password in offline mode
This problem occurs under the conditions below:
- User authentication using Active Directly is enabled.
- Password is not cached.
○
○
○
○
57
Network
Correction of the problem that Single Sign-On does not work when the
external authentication is working with Google drive/ Gmail/Exchange
E-mail etc.
○
○
○
○
58
Network
Modification to add “Enable/Disable of Google Drive” setting to Cloud
Connect Settings in System Settings so that it is possible to disable Google
Connect Settings in System Settings so that it is possible to disable Google
drive.
The default setting is “Disable” so please change the setting to “Enable”
when using Google Drive.
The default setting is “Disable” so please change the setting to “Enable”
when using Google Drive.
○
○
○
○
59
Network
Correction of disappearance of buttons on the Home screen
Login with IC card will erase the buttons on Home screen if executed under
the conditions listed below:
- Active Directly is used as LDAP server.
- User authentication with ID card is enabled.
- There is a user is logging in the MFP but another user logged in with the IC
card that present user logged off automatically.
○
○
Done
Done
60
Network
Correction of incorrect classification of the letter “Ö”
When narrowing down the address by initial in the Address Book, Å and Ä
are classified as “A”. On the other hand, Ö is classified as “ALL”
instead of “O”.
Modification is made so that the letter “Ö” classified as "O".
○
○
Done
Done
61
Network
Correction of failure to turn off/on the feature for total count display after
login
This problem occurs under following conditions:
- User authentication is enabled.
- Active Directory is set as authentication system.
○
○
Done
Done
62
Network
Correction of error with data transmission using SMB due to not ignoring the
invalid format of domain name
○
○
Done
Done
63
Network
Correction of failure to execute auto user registration
Execution of auto user registration may not get rid of the oldest user while
maximum number of user is registered that auto user registration fails.
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
64
Network
Correction of the problem that the print occasionally cannot be performed
on the machine in wireless connection due to the lockup.
○
○
Done
Done
65
Network
There was no description of Google Cloud printer setting/ Mopria setting/
Collaboration with Cloud in Network setting list. Description above has
been added.
○
○
Done
Done
66
Network
Correction of very rare case with the network connection failure after the
reboot
○
○
Done
Done
67
Network
Correction of the problem that the user fails to re-log in after the lapse of
10hours from his/her first log-in when using Active Directory authentication
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
68
Network
Correction of the connection error which may be caused during forwarding
the FAX reception data via network
○
○
Done
Done
69
Network
Correction of the problem that the user name cannot be displayed when
logging in using IC card of the user registered to MFP in Active Directory
authentication
○
○
Done
Done
70
Simulation
For Waste Toner Near End Alert MIB, the feature to support the differences
on the behavior depending on OS version has been added to Soft SW:
SIM55-3 SW32 Data 4
0:RFC compliant (Default)
1:RFC non-compliant
○
○
○
○
71
Simulation
Following feature has been added:
- EEPROM data is stored on a regular basis, and
- Backup data is restored to EEPROM with SIM56-15 when the problem
occurs.
○
○
○
○
72
Simulation
Correction of the problem that Auto Paper Selection does not work right
after shifting to the SIM test mode
○
○
○
○
73
Simulation
Correction of the following problem:
If the service password check to enter the simulation is set up (Sim26-79 B
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
cleared.
○
○
○
○
74
Simulation
Wordings for other languages than Japanese/English in SIM language list
have been partly corrected.
○
○
○
○
75
Simulation
Correction of failure to output List Print
○
○
○
○
76
Simulation
Modification has been made to detect the damage in the filling area and
notify the damage as E7-03 (Sub code: 0x14) trouble.
*When E7-03 (Sub code: 0x14) trouble occurs, the filling area can be
recovered by formatting the filling area with SIM62-11. However, the filling
data itself cannot be restored.
○
○
Done
Done
77
Simulation
Addition of the staple position adjustment feature for Saddle Stitch
SIM3-10
Saddle Stitch position adjustment All sizes
Saddle Fold position adjustment All sizes
○
○
Done
Done
78
Simulation
Correction of failure to recover from an ASIC error
An error with ASIC is indicated after firmware upgrade on rare occasions.
The MFP won’t recover unless Flash ROM is replaced.
The MFP won’t recover unless Flash ROM is replaced.
○
○
Done
Done
79
Simulation
Addition of PRINTER CONTROL feature to SIM26-03 (Auditor setting)
○
○
Done
Done
80
Simulation
Addition of the item of density adjustment timing to SIM44-28
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
81
Simulation
Mode to display a message for cleaning of Main charger (for 30/35/40 PPM
model) has been added:
SIM44-28
AP: MC_CLEAN_DISP
0: Disable (Default)
1: Enable
0: Disable (Default)
1: Enable
○
○
NA
NA
82
Copier
Correction of the following problem:
When performing the copy in Landscape with Rotation Copy being disabled,
the output result of the image may be rotated 180-degree.
○
○
○
○
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man124) service manuals if exist.