Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man97) Service Manual / Technical Bulletin ▷ View online
CCE-1154
ROM UPGRADE ..... (6).
1. Model Name:
MX-FR33U (Options for MX-4112N/5112N)
2. Description:
Upgrade of ICU-ROM
From May 2013 Production
ROM control No.
ICU
G00
0800Rc
* ICU above is the version described in the ROM management label. Check that the actual
version is: ICU(MAIN): 08.00.Rc.00/ICU(BOOT): 01.01.Rc.00/LANGUAGE: 01.11.S1.00/
GRAPHIC: 01.00.A1.00/UICONTENTS: 08.00.Rc.00/PCL(MAIN): 08.00.R1.00; by Sim22-5.
version is: ICU(MAIN): 08.00.Rc.00/ICU(BOOT): 01.01.Rc.00/LANGUAGE: 01.11.S1.00/
GRAPHIC: 01.00.A1.00/UICONTENTS: 08.00.Rc.00/PCL(MAIN): 08.00.R1.00; by Sim22-5.
Item of change: See the attached sheet
Note) This report is a T/R for the data security kit option, corresponding to general
T/R No. CCE-1139
T/R No. CCE-1139
ROM Version History Table
No.
ROM control No.
ICU
Action
T/R No.
(5)
F00
0700Rc
2012/7
CCE-1044
(4)
E00
0600Rc
2012/4
CCE-1019
(3)
D00
0500Rc
2012/2
CCE-1002
(2)
C00
0400Rc
2011/11
CCE-981
(1)
B00
0200Rc
2011/9
CCE-957
TECHNICAL BULLETIN
Date: May 20
th
2013
Model: MX-FR233U
Ref: CCE-1154
Ref: CCE-1154
Colour: White
Page: 1 OF 4
CCE-1154
[Description]
No.
Item
Details
1
UI
When performing the program registration data which was set to 2-sided print, if
the paper type which was selected as "Disable Duplex" was set up to the tray, in
some cases, the checkmark for 2-sided print setting of the program registration
would be OFF during the process of copying, and then the data would be printed
not on the double-sided but on the single-side. This problem has been corrected.
the paper type which was selected as "Disable Duplex" was set up to the tray, in
some cases, the checkmark for 2-sided print setting of the program registration
would be OFF during the process of copying, and then the data would be printed
not on the double-sided but on the single-side. This problem has been corrected.
2
UI
Transition speed to Fax screen (Reaction speed of the key) has been improved.
It takes too long to switch to Call Programs (in AP) -> Call Programs in Fax mode
right after start-up. This problem is corrected.
It takes too long to switch to Call Programs (in AP) -> Call Programs in Fax mode
right after start-up. This problem is corrected.
3
UI
It took too long to display thumbnail of incoming Fax data on Preview screen. This
problem has been corrected.
problem has been corrected.
4
UI
When there were a lot of custom folders, displaying the user list screen became
slow. This problem has been corrected.
slow. This problem has been corrected.
5
UI
When Document Filing print was prohibited, [Print Now] key in Document Filing
was grayed out. This problem has been corrected.
was grayed out. This problem has been corrected.
6
UI
When printing Hidden Pattern, in some cases, E7-01 error occurred. This problem
has been corrected.
has been corrected.
7
UI
The warning message "Operation is disabled. Please see your administrator for
your assistance." or " This operation is disabled. " was occasionally displayed if
IC card authentication was enabled. This problem has been corrected.
your assistance." or " This operation is disabled. " was occasionally displayed if
IC card authentication was enabled. This problem has been corrected.
8
UI
A Program for Copy mode could not be registered while MFP was in external
authentication mode for OSA. This problem has been corrected.
authentication mode for OSA. This problem has been corrected.
9
UI
If IC card was used for login while external authentication for OSA is enabled, the
home screen indicated no authentication. This problem has been corrected.
home screen indicated no authentication. This problem has been corrected.
10 UI
Sometimes background image garbled while displaying an error message on
popup in OSA mode. This problem has been corrected.
popup in OSA mode. This problem has been corrected.
11 UI
It was not possible to force the switching of paper tray while MFP was connected
to vending machine using parallel cable. This problem has been corrected.
to vending machine using parallel cable. This problem has been corrected.
12 Main unit
In some cases, MFP was unable to recover from deep sleep. This problem has
been corrected.
been corrected.
13 Main unit
If IC card reader was connected to MFP using USB cable, in some cases, MFP was
unable to recover from Power-Save mode. This problem is corrected.
unable to recover from Power-Save mode. This problem is corrected.
14 Main unit
When PC and MFP were connected via USB cable, MFP had some troubles such
as unable to recover from power-save mode etc... Those problems have been
corrected.
as unable to recover from power-save mode etc... Those problems have been
corrected.
15 Authentication
When Caps Lock is ON on the hardware keyboard, in some cases, the
authentication error occurred when authenticating with the card. This problem
has been corrected.
authentication error occurred when authenticating with the card. This problem
has been corrected.
16 Authentication
Modification has been made to be able to select by Soft SW whether to
authenticate the user already logged in by being authenticated with Active
Directory or not when receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate (Default)
1: Not authenticate
authenticate the user already logged in by being authenticated with Active
Directory or not when receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate (Default)
1: Not authenticate
17 OSA
If the first character of PC name was the number (0-9), in some cases, it was not
possible to connect to PC when OSA was activated.
possible to connect to PC when OSA was activated.
18 OSA
When reading the card containing the keyboard information like Shift etc using
OSA application, the shift data would be displayed on the operation panel as the
garbage information. This problem has been corrected.
OSA application, the shift data would be displayed on the operation panel as the
garbage information. This problem has been corrected.
19 OSA
When using Equitrac environment, the Auto Logout occasionally did not function
even when leaving the machine after logging in to the application. This problem
has been corrected.
even when leaving the machine after logging in to the application. This problem
has been corrected.
20 Simulation
Due to taking too long to collect the data for eco power control, the processing of
other execution jobs was occasionally disturbed (e.g. unable to output the FAX
receiving data etc). As the countermeasure, modification has been made to
other execution jobs was occasionally disturbed (e.g. unable to output the FAX
receiving data etc). As the countermeasure, modification has been made to
CCE-1154
shorten the execution time for collecting data for eco power by creating the high-
speed version of the table for collecting data for eco power. .
To shift to the high-speed version of the table, please perform the optimization of
SIM62-16: Joblog.
speed version of the table for collecting data for eco power. .
To shift to the high-speed version of the table, please perform the optimization of
SIM62-16: Joblog.
No.
Item
Details
21 Simulation
Status information of SMART for HDD shown in List Print (by executing SIM22-06
or SIM56-05) was indeterminate. As a Countermeasure, modification has been
made to show the followings as status information of SMART:
0: Normal HDD drive
1: HDD drive failure or may crush in the future
or SIM56-05) was indeterminate. As a Countermeasure, modification has been
made to show the followings as status information of SMART:
0: Normal HDD drive
1: HDD drive failure or may crush in the future
22 Web Page
During the connection test for "Internet Fax Settings" and "E-mail Print Settings"
of Web Page, if SSL authentication was enabled, the connection test would be
"Successful" as long as the communication with SSL is "Successful" even
Username/Password was wrong. This problem has been corrected.
of Web Page, if SSL authentication was enabled, the connection test would be
"Successful" as long as the communication with SSL is "Successful" even
Username/Password was wrong. This problem has been corrected.
23 Image Send
The Inbound Routing List with the different registration information was output.
This problem has been corrected.
This problem has been corrected.
24 Image Send
When sending a large volume of broadcasting jobs from PC, in some cases, the
data could not be printed under Print Waiting of PRINT LIST. This problem has
been corrected.
data could not be printed under Print Waiting of PRINT LIST. This problem has
been corrected.
25 Image Send
MFP locked up on rare occasions while receiving I-Fax data. This problem has
been corrected.
been corrected.
26 Image Send
I-FAX receive data from the certain model could occasionally be printed. This
problem has been corrected.
problem has been corrected.
27 Image Send
If new Image Send job was caused while printing Activity Report, next Activity
Report would be printed with old record. This problem has been corrected.
Report would be printed with old record. This problem has been corrected.
28 Image Send
ScanToFTP PASV mode has been supported.
29 Printer
If User Authentication failed at the time of printing, the file name of the job log
changed to the one for previous job (which succeeded). This problem has been
corrected.
changed to the one for previous job (which succeeded). This problem has been
corrected.
30 Printer
If jobs are sent to the MFP sequentially, in some cases, the machine locked up
being "Rendering" at the 2nd or later job. This problem is corrected.
being "Rendering" at the 2nd or later job. This problem is corrected.
31 Printer
Direct print of particular PDF file from USB could not be performed. This problem
has corrected.
has corrected.
32 Printer
When printing an encrypted PDF file from Mac, in some cases, the data could not
be printed correctly. This problem has been corrected.
be printed correctly. This problem has been corrected.
33 Printer
When printing the certain PDF data, in some cases, the data could not be printed
out under "Rendering" state. This problem has been corrected.
out under "Rendering" state. This problem has been corrected.
34 Printer
When performing the direct print of the certain PDF file, E7-95 error occurred.
This problem has been corrected.
This problem has been corrected.
35 Printer
When performing the direct print of the certain PDF file, in some cases, the blank
page was output. This problem has been corrected.
page was output. This problem has been corrected.
36 Printer
When printing PCL5 data with the mixed originals of Portrait/Landscape that
contains RESET COMMAND in the middle of the job, the print direction would
become inappropriate in the process of printing. This problem has been
corrected.
contains RESET COMMAND in the middle of the job, the print direction would
become inappropriate in the process of printing. This problem has been
corrected.
37 Printer
When executing the consecutive print jobs in the environment where the external
accounting software was used, in some cases, the error occurred. This issue has
been corrected.
accounting software was used, in some cases, the error occurred. This issue has
been corrected.
38 Printer
When transferring the fax data to mobile terminal by e-mail with PDF format and
then printing the data with Sharpdesk mobile, the image would be extended. This
problem has been corrected.
then printing the data with Sharpdesk mobile, the image would be extended. This
problem has been corrected.
39 Printer
When performing the direct print of the certain B/W PDF file, in some cases, it was
counted as Color. This problem has been corrected.
counted as Color. This problem has been corrected.
40 Printer
PS job could not occasionally be printed under Mac/Linux environment. This
problem is corrected.
problem is corrected.
CCE-1154
41 Printer
When printing PCL5 data with the certain font, the machine locked up. This
problem has been corrected.
problem has been corrected.
42 Printer
Unable to download fonts in a batch. This problem has been corrected.
43
Network
communication
communication
44
Network
communication
communication
On SMB server (NAS) feature, if a print job was sent while several clients were
connecting to (browsing) NAS folder, MFP showed Waiting and never started
printing. This problem has been corrected.
connecting to (browsing) NAS folder, MFP showed Waiting and never started
printing. This problem has been corrected.
No.
Item
Details
45
Network
communication
communication
When collecting syslog, in some cases, the download of syslog did not complete,
and then the data could be collected. This problem is corrected.
and then the data could be collected. This problem is corrected.
46
Network
communication
communication
When printing with specifying "Select File from Network Folder to Print" from
Document Filling, in some cases, the data would not be printed out. This problem
has been corrected.
Document Filling, in some cases, the data would not be printed out. This problem
has been corrected.
47
Network
communication
communication
When using spanning tree HUB, MFP could not be recovered from Sleep mode.
This problem is corrected.
This problem is corrected.
48
Network
communication
communication
After security patch KB2585542 was applied to Windows, the connection using
IPP SSL would fail. This problem has been corrected.
IPP SSL would fail. This problem has been corrected.
49
Network
communication
communication
When "DNS Update" is "Enable", the machine hangs up due to the connection
with the external authentication application. This problem has been corrected.
with the external authentication application. This problem has been corrected.
50
Network
communication
communication
"HTTP to HTTPS redirect" does not work on web page. This problem is corrected.
51
Network
communication
communication
In very rare cases, print job stopped during execution of print. This problem is
corrected.
corrected.
52 Others
Modification has been made not to export the items (Address Book etc) which
should be exported with storage backup when exporting the device cloning data
from System Settings on the machine.
should be exported with storage backup when exporting the device cloning data
from System Settings on the machine.
53 Others
If the device cloning data of the machine with "Preview" being set was imported to
the machine with no "Preview" function, the copy would be unable to be
performed. This problem has been corrected.
the machine with no "Preview" function, the copy would be unable to be
performed. This problem has been corrected.
54 Others
As the countermeasure for the issue of "Address Book is lost" due to HDD auto
recovery processing (re-mounting processing at the time of “WatchDogError”),
modification has been made not to perform remounting by this auto recovery
processing but stop MFP as E7-03(09) error.
recovery processing (re-mounting processing at the time of “WatchDogError”),
modification has been made not to perform remounting by this auto recovery
processing but stop MFP as E7-03(09) error.
Display