DOWNLOAD Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Service Manual ↓ Size: 43.12 KB | Pages: 5 in PDF or view online for FREE

Model
MX-4110N MX-4111N MX-4112N MX-4110FN MX-4111FN MX-5110N MX-5111N MX-5112N MX-5110FN MX-5111FN (serv.man146)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
43.12 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ROM UPGRADE ... (2). Ver 03.00.R1
File
mx-4110n-mx-4111n-mx-4112n-mx-4110fn-mx-4111fn-mx-.pdf
Date

Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Service Manual / Technical Bulletin ▷ View online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-937 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name:
 
MX4112N – MX5112N 
 
2. Description: 
Upgrade of ICU, PCL, PCU-ROM and E-Manual 
 
From July 2011 production 
ROM control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
C00 
0300R10a 
0300R100 
0104R10a 
0101R100 
0100G100 
0140R100 
*  ICU above is the version described in the ROM management label. Check that the actual 
version is:
 
ICU(MAIN): 03.00.R1.0a/ICU(BOOT): 01.00.R1.00/ICU(SUB): 01.02.R1.0a/ 
LANGUAGE: 01.41.A1.00/GRAPHIC: 01.00.A1.00/UICONTENTS: 03.00.R1.00 by Sim22-5. 
Also  PCL  above is the version described in the ROM management label. Check that the 
actual version is:
 
PCL(MAIN): 03.00.R1.00/PCL(PROFILE): 01.00.R1.00 by Sim22-5. 
Item of change: See the attached sheet. 
 
ROM Version Combination History Table 
 
No. 
ROM  
control No. 
ICU 
PCL 
PCU 
SCU 
FAX 
E-Manual 
Action 
(1) 
B01 
0201R100 
0200R100 
0103R100 
0101R100 
0100G100 
0130R100 
2011/5 
Mid 
 
ROM UPGRADE ..... (2). Ver 03.00.R1
 
TECHNICAL BULLETIN 
 
Date:  
15
th
 August 2011 
Model:  
MX4112N – MX5112N 
Ref.:   
004 
Colour:  
White 
Page:  
1 of 5 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-937 
 
[Description] 
No. 
Item 
Details 
Address book related 
From the print driver, address book acquisition could not be performed. This problem has 
been corrected. 
Address book related 
A check box "Apply addresses in sending mode only" has been added under [System 
Settings] 
 [FAX/Image Sending] 
 [Operation Settings]. Only address to the contacts 
of the mode, refined by job type, can now be selected. (Default: Checked) 
Address book related 
On the "Recent Addresses" display, if the dial input number is registered to the address 
book after sending with direct dial input, "Recent Addresses" display would not be 
updated to show the registered name of the number and it would remain as the direct dial 
(number). The registered name will now update. 
Address book related 
From the address list screen, a contact name of a contact registered to a group couldn’t 
be confirmed. As an improvement, for addresses that are registered to a group, the 
display of the "Address/Number" field will display as follows. 
 
- Two line display 
- 1st line displays the contact name (for direct input, the "Direct input" will be displayed). 
- 2nd line will display the address or number. 
Main unit 
authentication related 
Card authentication used with the ELWISE (Large ELWISE) card can now be supported. 
 
When using the ELWISE card, enter a setting value “107” in [User administration] 
 
[Card type/Card reader setting]. 
Main unit 
authentication related 
When LDAP server setting and LAN settings are not completed, the authentication 
response for unregistered cards was slower. As an improvement, if the LDAP server 
settings are not completed, after searching through the main unit general registered user 
search with the card ID, unregistered cards will immediately return an authentication error 
without the LDAP authentication. 
Main unit 
authentication related 
When automatic logout is enabled on Felica (IDM) card authentication, if the card was 
used for repeated fast operations, the card would not be detected. This problem has 
been corrected. 
UI related 
The check boxes "Display position in system settings" and "Enable the link for the 
displayed position" have been added under [System Settings] 
 [Operation Settings]. In 
the setting mode screen upper, the menu position currently displayed can be 
confirmed.(Default: Checked) 
UI related 
The settings file for the IC card user area settings can now be confirmed whether or not 
the setting has been completed. In addition, to clear the settings file, a "Clear" key has 
been added to [User Administration] 
 [Card Area Settings]. 
10 
UI related 
In [System Settings] 
 [Device Settings], one-sided/two-sided print switch settings for 
list print have been added. 
11 
UI related 
On the settings screen where date and time can be specified, when the setting buttons 
“+” and “-” are pressed, the date and time now operate in a loop. 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-937 
 
 
No. 
Item 
Details 
12 
UI related 
For the warning message display when the multi address sending is set to prohibited, the 
warning message would be displayed when multi addresses are selected and the start 
key is pressed. However, the display is now triggered by the 2nd address being selected. 
13 
UI related 
An "Action panel default display" check box has been added under [System Settings] 
 
[Operation Settings]. Now, whether or not to display the action panel by default can be 
selected.(Default: Checked) 
14 
UI related 
To improve the operation ability of the soft keyboard displayed for FAX number input 
when registering or editing an address from the operation panel, the input area can now 
be moved using the [
] and [
] keys. 
15 
UI related 
The selected default display (list display/thumbnail display) on the data call screen for 
document filing, can be selected separately, the base folder/temporary folder or the user 
folder.(Default: list display) 
 
[Setting location] 
[System Settings] 
 [Operation Settings] 
 [Preview Settings] 
16 
UI related 
When using pull printing from a FTP/common folder and a user name/password is 
required to access the server, the authentication screen would not be displayed. Instead, 
an error message (RM0001) instructing that the server could not be accessed would be 
displayed. Now, an authentication dialog will be displayed. 
17 
UI related 
Based on the selected pattern display for the bar displayed on the screen that shows the 
remaining toner, it could be difficult to see in some cases, therefore the background 
design for the bar has been changed. 
 
* Remaining toner display screen can be displayed by changing the control software SW 
(Sim55-3) as follows; SW No. 22 Data 5: 0 
 1. 
18 
UI related 
The [OK] key has been removed from the 10 key screen, and the numbers can be set 
using the [X] key on the setting dialog. These corrections have been added to the 
following modes. 
 
- [System Settings] 
 [FAX/Image Sending] 
- [System Settings] 
 [F-Code Memory Box] 
19 
UI related 
The contents of the American English messages have been fix and changed. 
20 
UI related 
In large character mode, the right character column in the top of the action panel would 
become cut off. To improve this, using a screen conversion trigger, the full screen will be 
displayed for a moment and then it will return back to the original position after a 
specified period of time (1 second). 
21 
UI related 
For web browsing standard machine, a web browsing icon has been displayed in the 
header of the 2nd screen (home screen). 
22 
UI related 
After performing secure user login settings, if the user permissions were changed they 
would not be reflected. This problem has been corrected. 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-937 
 
 
No. 
Item 
Details 
23 
UI related 
When the login name is set to display with "*", the displayed login name on the user list 
would not be displayed with "*". This problem has been corrected. 
24 
UI related 
When the application expansion kit is loaded and when the left or right scroll buttons 
were pressed on the settings screen, incorrect fields would be displayed. This problem 
has been corrected. 
25 
Copy related 
When a copy job is being executed and the [Cancel printing] button was pressed, after 
the "Would you like to cancel job?" message was displayed, even if the [Do not cancel] 
button was pressed, in some cases the machine would stay in "Ready" and not start 
printing. This problem has been corrected. 
26 
Printer related 
During print output, in some cases the character would not be output correctly (The 
characters would be output as "  "). This problem has been corrected. 
27 
Printer related 
When printing from the AS/400, in some cases images would be slide to the left. This 
problem has been corrected. 
28 
Printer related 
In some cases the retention hold jobs of the printer would hang-up while being analyzed. 
This problem has been corrected. 
29 
Printer related 
In printer retention hold job, when an odd number of pages are set for double-sided print 
and print is executed, in some cases the thumbnail creation would not be correctly 
completed. This problem has been corrected. 
30 
FAX related 
Attached image results output jobs of a received FAX that was finished as busy would be 
displayed and deleted repeatedly on a job status. This problem has been corrected. 
31 
FAX related 
In the over memory state (remaining memory is 3%), the machine would receive an 
incoming FAX. This problem has been corrected. 
32 
FAX related 
When sending a FAX, the origin name would not be included in some cases. This 
problem has been corrected. 
33 
Image transfer related 
In the "Scan to me" function, the items [Apply when selecting the FAX/Internet FAX 
screen] and [Authorize cancelation] have been added. 
 
[Setting location] 
[System Settings] 
 [FAX/Image Sending] 
 [Scanner Settings] 
 [Default Address] 
 "Use the logged in user's e-mail address" 
34 
Image transfer related 
From the preview screen of the received data, if the data was forwarded to the 
scanner address, in some cases an NG90-0061 error would be issued. This problem 
has been corrected. 
35 
Image transfer related 
In some cases, when using PC-FAX sending and a HDD write error, etc. occurred, 
"Document filing function for the main unit is not available, save transmission failed" 
would be displayed. This problem has been corrected. 
Page of 5
Display

Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Service Manual ↓ Size: 43.12 KB | Pages: 5 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Copying Equipment. Information contained in Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man146) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.