DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N Service Manual ↓ Size: 5.03 MB | Pages: 82 in PDF or view online for FREE

 

 

 

SSID: 

Enter the SSID of the access point that the 
MFP is to connect to. 

Enter the SSID of the Access Point that the 
MFP is to broadcast (for clients to connect). 

Security 
Type: 

Select the security type that is set for the 
access point:- 

1.  None (Default). 
2.  WEP. 
3.  WPA-Personal. 
4.  WPA-Enterprise. 
5.  WPA2-Personal. 
6.  WPA2-Enterprise 

Select the security type to use between 
mobile devices and MFP:- 

1.  None (Default). 
2.  WEP. 
3.  WPA-Personal. 
4.  WPA2-Personal 

Encryption: 

Select an Encryption Type:- 
When the security type is set to [WEP], 
this setting is greyed out. When the 
security type is set to [None], either 
[WEP] or [None] can be selected for 
encryption. When [WPA-Personal], [WPA-
Enterprise], [WPA2-Personal] or [WPA2-
Enterprise] are set, either [TKIP] or [AES] 
encryption types can be selected. 

Select an Encryption Type:- 
When the security type is set to [WEP], this 
setting is greyed out. 
When the security type is set to [None], 
either [WEP] or [None] can be selected for 
encryption. When [WPA-Personal] or [WPA2-
Personal] are set, either [TKIP] or [AES] 
encryption types can be selected. 

Security Key: 

Enter the security key. 
WEP  64 bit: 5 characters or a 10-digit hex number. 
WEP 128 bit: 13 characters or a 26-digit hex number. 
WPA/WPA2: 8～63 characters or a 64-digit hex number. 

Show 
Security Key: 

Change this setting to [ON] show the security key. The factory default is [OFF] 

Device IP 
Address: 

Not Shown. 

Set the IP address of the MFP. 
(Set a different segment from the IP address 
for a wired LAN connection). 

Channel: 

Not Shown. 
Note: The channel used by the Access 
Point is automatically selected. 

Set a channel for the usage of wireless LAN 
automatically or manually within the channel 
1 to 14. (The number of channel available 
varies depending on the regulation for each 
country). Factory default is [6] 

Transmission 
Level: 

Not shown. 

Select a transmission level:- 
1 (Low), 2 (Mid), 3 (High -Default). 

Bandwidth: 

Not shown. 

This should be used if communication mode 
is set to [11n]. Either 20MHz (Default) or 
40MHz can be selected. 

IP Address  
Distribution 
Range: 

Not shown. 

Set the range of IP addresses to be assigned 
to mobile devices. The values in the first 
three ranges of the device IP address are 
automatically shown in the first three ranges 
of the IP addresses to be assigned to mobile 
devices. 

Leasing 
Period: 

Not shown 

Set the time to automatically release each of 
the IP address assigned to mobile devices. 
Select 1 to 60 min (default is [15] min). 

 

 

 

 

7.  Once the Wireless LAN is enabled, a Wireless LAN connection status icon will appear on the upper 

screen system bar (as shown):- 

 

 

 

Wireless LAN Status Indications:- 

 

Currently 

Connected 

Access Point 

Not Connected 

Access Point 

Standby 

Not 

Connected* 

 

 

 

 

 

* Not connected due to connection failure of USB wireless module or operation failure. 
   (incorrect wireless LAN settings for example). 

 
To View Wireless LAN Settings:- 

 

In addition to viewing the Wireless LAN settings via Settings (Network Settings – Wireless Settings menu), the 
current Wireless LAN settings can also be displayed when the Wireless Icon key in the system bar is pressed. 

 

 

 

Select Check Wireless LAN Settings to view the current settings for the Wireless LAN. 

 

 

 

 

 

 

 

 

The MX-3050N-MX-6070N series can be configured for Pull / Find Me Printing by using the standard Sharp 
Print Release system (rather than external server). Sharp Print Release is a printing feature whereby a user’s 
print job is held on a Master MFP, and is released by the user on either a Master or Client MFP supporting 
this feature. Once enabled, approx. 16GB of storage is available on the Master MFP. It is also recommended 
that a maximum of 5 Client MFPs can connect to one Master MFP. 

 

Sharp Print Release can be used with or without authentication. When authentication is disabled, all print 
jobs held on the master can be displayed/released on any Master or Client MFP by any User. 
 
Configuring the MASTER MFP: 

 

1.  Open the Device Webpage and enter the following menu (Administrators password will be required):- 

 

2.  Enable Print Release and configure the following settings:- 

Connecting Code:    

 

 

Enter a unique code (up to 32 digits) that will allow the  

 

 

 

 

 

 

connection of Client MFPs to the Master MFP. 

Primary / Secondary Unit:   

 

Select Primary Unit (Master). 

Require Authentication when Storing: 

Enable when Authentication is required to release stored  

 

 

 

 

 

 

jobs 

Port Number: 

 

 

 

Default setting is Port 53000 – only change if necessary. 

Default Settings: 

 

 

 

Enable if B/W Print is required as default? 

 

 

 

 

 

 

Enable Print & Delete the Data so that the Users job is  

 

 

 

 

 

 

automatically deleted when released (recommended)? 

 

Delete Stored Data after Specified Time:  Enable if Print data stored on the Master MFP should be  

 

 

 

 

 

 

 

deleted automatically after a specified time. 

 

 

 

 

 

 

Configuring the CLIENT MFP: 

 

1.  Open the Device Webpage and enter the following menu (Administrators password will be required):- 

 

2.  Enable Print Release and configure the following settings:- 

Connecting Code:  

 Enter the same connecting code (up to 32 digits) that was 
entered for the Master MFP. 

Primary / Secondary Unit:   

 

Select Secondary Unit (Client). 

Address of Primary Unit:   

 

Enter the IP Address of the Master MFP. 

Port Number: 

 

 

 

Enter the same Port Number as the Master MFP 
Default setting is Port 53000. 

Default Settings: 

 

 

 

Enable if B/W Print is required as default? 

 

 

 

 

 

 

Enable Print & Delete the Data so that the Users job is  

 

 

 

 

 

 

automatically deleted when released (recommended)? 

 

 

 
Configuring the PRINTER DRIVER:  

 

1.  Install the required MX-3050N-MX-6070N series Print Driver (PCL or optional PS) and setup the 

Printer Queue to the MASTER MFP device. 

 

2.  When using Add Printer method, run Auto Configuration from the Configuration tab of Printer