DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man81) Service Manual ↓ Size: 794.01 KB | Pages: 6 in PDF or view online for FREE

Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man81)
Pages
6
Size
794.01 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / CCE 1738 SERVICE PARTS SETUP OF CORRECTIVE PARTS FOR PRINT CONTAMINATION FROM FUSER ROLLER
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man81) Service Manual / Technical Bulletin ▷ View online

[CR4] Assembling procedure of CL roller unit
Mount Lower CL roller pad AS (4).
Mount the fixing plate (5) on to Lower CL roller pad AS, 
and fix it with M3 screws (x3).
8
(4)
Positioning: Convex 
Positioning: Concave 
(5)
Positioning (Align the notches)
Step5
Step6
Finished
[CR4]  Procedure to install CL roller unit to Fusing unit
Remove Rear lower PG unit.
*M4 screw  x 2pcs
Also remove the 
Rear lower PG unit removed
Remove Stay (sheet metal).
*M4 screw x 2pcs
M3 Step screw x 1pc
M4 screw
M3 Step 
M4 screw
Stay (sheet metal) which 
should be removed 
Stay (sheet metal) removed.
*Install CL system to the position of the 
removed stay.
Cover (resin) which 
should be removed.
Step1
Step2
With no Lower separate plate
UN;
With Lower separate plate;
[CR4]  Procedure to install CL roller unit to Fusing unit
CL roller unit which will be 
installed
4 screw
Fix with M4 screw.
Fit the  convex section of CL roller unit
to the frame hole of Lower PG.
Fit the notch section (dent) of CL roller unit 
to the frame caulking section (convex) of Rear lower PG.
Fix with M4 screw.
4 screw
M3 Step 
Rear side
Front side
Fix the cover with M3 
Step screw.
Cover (resin)
Install Rear lower PG unit with CL roller 
unit to Fusing unit with M4 screws (x2).  
This is the end of the installation work.
*Conduct the wiring of harness.
Step3
Step4
[CR4]  Procedure to install CL roller unit to Fusing unit
CL roller unit which will be 
installed
4 screw
Fix with M4 screw.
Fit the  convex section of CL roller unit
to the frame hole of Lower PG.
Fit the notch section (dent) of CL roller unit 
to the frame caulking section (convex) of Rear lower PG.
Fix with M4 screw.
4 screw
M3 Step 
Rear side
Front side
Fix the cover with M3 
Step screw.
Cover (resin)
Install Rear lower PG unit with CL roller 
unit to Fusing unit with M4 screws (x2).  
This is the end of the installation work.
*Conduct the wiring of harness.
Step3
Step4
Page of 6
Display

Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man81) Service Manual / Technical Bulletin ▷ Download